Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 46 for “"Loading configuration"”.

  1. PROGRESSIVE MICROSCOPIC DAMAGE AND THE DEVELOPMENT OF MACROSCOPIC FRACTURE IN POROUS SANDSTONES

    … at different strain rates. A lateral relaxation loading configuration was adopted in which a cylindrical sample is deformed under decreasing radial stresses while the axial load remains constant. This loading path was proven to successfully map out the brittle failure envelope. Compared to …

    maryland Repository record for PROGRESSIVE MICROSCOPIC DAMAGE AND THE DEVELOPMENT OF MACROSCOPIC FRACTURE IN POROUS SANDSTONES (opens in a new tab)

  2. Evaluation of flexural strength of multilayer zirconia under three loading configurations

    … the layer in maximum tension side, i.e., loading configuration. Although the previous studies have examined flexural strength of the separate layers in one zirconia disc, capturing flexural strength across all layers of multilayer zirconia is still challenging yet important for their …

    bu Repository record for Evaluation of flexural strength of multilayer zirconia under three loading configurations (opens in a new tab)

  3. Aerodynamics of a freight train passing through a tunnel

    … with a blockage ratio of 0.202. The effects of loading configuration, nose roundness, train length and speed are examined and the results are synthesized with 1D analytical modelling for further analysis. For the first time, it is shown that for partially loaded trains, the maximum pressure rise …

    birmingham Download PDF for Aerodynamics of a freight train passing through a tunnel (opens in a new tab)

  4. Failure Analysis of Brazed Joints Using the CZM Approach

    … shows dependency on the specimen geometry and loading configuration. Fracture of the brazed joints and the subsequent ductile tearing process are investigated using a two-parameter CZM. The characterizing model parameters of the cohesive strength and cohesive energy are identified by a …

    waterloo Repository record for Failure Analysis of Brazed Joints Using the CZM Approach (opens in a new tab)

  5. Poroelastic Calibration for Hydromechanically Coupled Numerical Discontinuum Models with Application in Low Permeability Hard Rock

    … analysis was performed to determine the optimal loading configuration for the numerical apparatus. The results indicated that a loading configuration where both platens were simultaneously loaded at a rate of less than 0.2 mm/s provided resultant values with error less than 1% and an efficient …

    queens Repository record for Poroelastic Calibration for Hydromechanically Coupled Numerical Discontinuum Models with Application in Low Permeability Hard Rock (opens in a new tab)

  6. Development of a DXA–based patient–specific finite element model for assessing osteoporotic fracture risk

    … to evaluate osteoporotic fracture risk. The loading configuration was designed to simulate a lateral fall onto the greater trochanter. Bone inhomogeneous mechanical properties (e.g. Young’s modulus) assigned to the FE model were correlated to bone mineral density captured in DXA image using …

    manitoba Repository record for Development of a DXA–based patient–specific finite element model for assessing osteoporotic fracture risk (opens in a new tab)

  7. Mapping Anisotropy of the Proximal Femur for Improved Image-Based Finite Element Analysis

    … and isotropic models in a sideways fall configuration. Comparing model stiffness to experimental data revealed no difference in correlation (R2ORTH = 0.780, R2ISO = 0.788). These results suggest that the variability in stiffness explained by anisotropy at the microarchitecture level does …

    calgary Repository record for Mapping Anisotropy of the Proximal Femur for Improved Image-Based Finite Element Analysis (opens in a new tab)

  8. The Effects of Variable Quadriceps and Hamstring Loading Configurations on Knee Joint Kinematics During In Vitro Testing

    … kinematics as a function of different loading configurations of the extensor mechanism and 2) measure the changes in tibiofemoral kinematics after including a direct hamstrings load. Fourteen fresh frozen cadavers were tested using a custom designed muscle loading rig. The rig can …

    ku Repository record for The Effects of Variable Quadriceps and Hamstring Loading Configurations on Knee Joint Kinematics During In Vitro Testing (opens in a new tab)

  9. The aerodynamics of a container freight train

    … train and investigate how changing container loading configuration affects the magnitude of aerodynamic forces measured on a container. 1/25th scale moving-model freight train experiments were carried out at the University of Birmingham's TRAIN rig facility. Slipstream velocities and static …

    birmingham Download PDF for The aerodynamics of a container freight train (opens in a new tab)

  10. An Investigation of the Flexural Strength and Toughness of Hybrid Plain and Fiber Reinforced Concrete for Pavement Applications

    … the flexural performance under a third point loading configuration of plain concrete (PC) beams, fully fiber reinforced concrete (FRC) beams, and hybrid PC and FRC beams, with a top PC and bottom FRC layer. The purpose of this hybrid approach was to provide FRC in only half the section, saving …

    arkansas Repository record for An Investigation of the Flexural Strength and Toughness of Hybrid Plain and Fiber Reinforced Concrete for Pavement Applications (opens in a new tab)

  11. Development of a Technique to Diagnose Subtalar Joint Instability

    … goal, a six degree of freedom positioning and loading device was developed to apply physiologic loads to the hindfoot. Because the ideal loading configuration to detect subtalar joint instability is unknown, the device was designed to apply rotational and translational forces simultaneously. …

    odu Repository record for Development of a Technique to Diagnose Subtalar Joint Instability (opens in a new tab)

  12. Trajectory Optimization Strategies For Supercavitating Vehicles

    … principle of hydrodynamic stability. This unique loading configuration, the complex and non-linear nature of the interaction forces between vehicle and cavity, and the unsteady behavior of the cavity itself make the control and maneuvering of supercavitating vehicles particularly challenging. This …

    gatech Repository record for Trajectory Optimization Strategies For Supercavitating Vehicles (opens in a new tab)

  13. Predicting the Mechanical Response of H100 PVC Foam from Mesostructural Finite Element Analysis

    … in observed macroscopic mechanical anisotropy. A loading configuration was implemented to investigate core-dominated fracture behavior in sandwich structures, employing a strain based element erosion criterion, inspired by double cantilever beam (DCB) tests. The developed framework successfully …

    chalmers Repository record for Predicting the Mechanical Response of H100 PVC Foam from Mesostructural Finite Element Analysis (opens in a new tab)

  14. Relating detonation parameters to the detonation synthesis of nanomaterials

    … and experimental tests indicated that loading configuration and impedance mismatch of the precursor additives used in detonation synthesis results in conditions in the additives that exceed the accepted detonation pressure of the explosive by greater than three times. Finally, a full …

    must-thes Repository record for Relating detonation parameters to the detonation synthesis of nanomaterials (opens in a new tab)

  15. Three-Dimensional Probabilistic Finite Element Model of a Cemented Hip Implant for Brittle Fracture

    … was the more likely cause of failure than overloading. The model used Monte Carlo sampling to create 1000 possible simulations varying in material stiffness and loading magnitude. The analysis found virtually no possibility of failure due to overloading. In contrast, failure due to fatigue had …

    calpoly Repository record for Three-Dimensional Probabilistic Finite Element Model of a Cemented Hip Implant for Brittle Fracture (opens in a new tab)

  16. Using a Nondispersive Wave Propagation for Measuring Dynamic Fracture Initiation Toughness of Materials: Experimental and Numerical Based Study

    … of most engineering materials under quasi-static loading condition. Usually, these properties are obtained experimentally by using standard methods such as ASTM E399, E1820 or E1920 to evaluate the stress intensity factor ������ ������������, elastic-plastic toughness ������ ������������ and crack …

    south-carolina Repository record for Using a Nondispersive Wave Propagation for Measuring Dynamic Fracture Initiation Toughness of Materials: Experimental and Numerical Based Study (opens in a new tab)

  17. Three-dimensional modeling of failure in quasi-brittle materials and structures

    … boundary conditions such as geometry, size, and loading configuration. The main objective of this study is to develop models and to apply numerical tools to predict the cracking potential in three-dimensional concrete structures. Firstly, a cohesive zone model is formulated and implemented to …

    uiuc Repository record for Three-dimensional modeling of failure in quasi-brittle materials and structures (opens in a new tab)

  18. Experimental and Analytical Investigations of Doubly Symmetric Built-Up I-Girders with Large Moment Gradient Factors

    … of steel I-girder members, where each loading configuration explored a range of web slenderness ratios. Parametric FEA simulations extended the laboratory specimens through a range of unbraced lengths using nominal specimen dimensions, material properties, geometric imperfections, and …

    gatech Repository record for Experimental and Analytical Investigations of Doubly Symmetric Built-Up I-Girders with Large Moment Gradient Factors (opens in a new tab)

  19. The Investigation of Cold-mix Asphalt Creep Stiffness Testing Using Multiple Test Apparatuses and Gradations

    … and is due to the difference of sample and loading configuration. This research begins the validation of using smaller scale DHR tests for CIR stiffness testing.

    arkansas Repository record for The Investigation of Cold-mix Asphalt Creep Stiffness Testing Using Multiple Test Apparatuses and Gradations (opens in a new tab)

  20. Stick-slip friction and rotational vibration under large contact areas and uneven distributed loads

    … effect of various parameters such as total load, loading configuration, speed, and spring stiffness on the stick-slip vibrations. The simulations using proposed integrated LuGre model are found to be in good agreement with the experimental results. The experiments have revealed that with all other …

    ubc Repository record for Stick-slip friction and rotational vibration under large contact areas and uneven distributed loads (opens in a new tab) Download PDF for Stick-slip friction and rotational vibration under large contact areas and uneven distributed loads (opens in a new tab)

Page 1 of 3