Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 28 for “"Locking-range"”.
-
Low jitter phase-locked loop clock synthesis with wide locking range
… to synthesize several clock signals in the range of 20-400 MHz with low phase noise was designed. Implemented in a standard 0.35-um N-well CMOS process technology, the PLL achieves a period jitter of 6.5-ps (rms) and 38-ps (peak-to-peak) at 216 MHz with a phase noise of -120 dBc/Hz at …
-
A Fully Integrated Multi-Band Multi-Output Synthesizer with Wide-Locking-Range 1/3 Injection Locked Divider Utilizing Self-Injection Technique for Multi-Band Microwave Systems
… injection locked frequency divider (ILFD). A new locking mechanism for the ILFD based on the gain control of the feedback amplifier is utilized to enable tunable and enhanced locking range which facilitates the attainment of stable locking states. The PLL has three concurrent multiband outputs: …
-
On the design of injection-locked frequency dividers for mm-wave applications
… first direct-injection ILFD achieves a measured locking range of 24.5 GHz to 43 GHz while consuming 1.3 mW from a 0.48-V supply with a 0 dBm input injection power. The second ILFD design is based on the dual-injection multi-band architecture and as compared to the first design enhances the …
-
Impact of Total-Ionizing Dose on Injection-Locked Voltage-Controlled Oscillators
… experience frequency drift; therefore, injection locking can be implemented in a VCO to stabilize these performance metrics. Injection-locked VCOs (ILVCOs) in satellite communications or radar systems can be subject to total- ionizing dose (TID) effects, which could alter the performance of the …
-
Silicon-based terahertz signal generation with multi-phase sub-harmonic injection locking technique
This thesis presents a multi-phase injection locking (IL) technique and its application in the locking range extension in multi-phase injection locking oscillators (ILOs) for Terahertz (THz) signal generation. The proposed technique can significantly increase the frequency locking range of a …
-
INJECTION LOCKING OF SEMICONDUCTOR LASERS
… its free-running output intensity. The static locking bandwidth is asymmetrical about zero detuning. The upper static locking boundary is a linear function of injection ratio and is independent of biasing current and linewidth enhancement factor. The lower static locking boundary is a linear …
-
Comparative study of passive modelocking configurations in semiconductor lasers
… short optical pulses through passive modelocking, and the analysis of the possible uses for these optical pulse generators. Three different modelocking configurations have been studied to generate optical pulses at frequencies between 1 and 15 GHz; two of them monolithic configurations, …
-
Low-Power CMOS Circuits for High-Performance Deep Submicron System on a Chip
… new frequency multiplier to overcome the limited locking range and frequency multiplication problem of conventional DLL-based system.
-
Frequency Locking Techniques Based on Envelope Detection for Injection-Locked Signal Sources
… In many gigahertz and millimeter-wave frequency ranges, conventional frequency generation techniques have encountered several design challenges in terms of frequency tuning range, phase noise, and power consumption. Recently, injection locking has been a popular technique to solve these design …
-
Process and Temperature Compensated Wideband Injection Locked Frequency Dividers and their Application to Low-Power 2.4-GHz Frequency Synthesizers
… Medical (ISM) band is being used for a diverse range of applications due to the following reasons. It is the only unlicensed band approved worldwide and it offers more bandwidth and supports higher data rates compared to the 915-MHz ISM band. The power consumption of devices utilizing the …
-
Characterization and Implementation of an Injection Locked Frequency Divider Based on Relaxation Oscillator
… flip-flop based dividers. However their range of operating frequency, also known as the locking range, is limited. ILFDs can be classified as LC tank, ring or relaxation oscillator based. There have been a lot of published works on the LC tank and ring oscillator based ILFDs. However, the …
-
A 26 GHz Phase-Locked Loop Frequency Multiplier in 0.18-um CMOS
… plane analysis is used for prediction of PLL locking range based on initial conditions of phase and frequency offsets. Tracking range of the PLL is limited by the inherent narrow locking range of the ILFD, and is confirmed via experimental results. The performance benefits of the fully …
-
Design of CMOS integrated phase-locked loops for multi-gigabits serial data links
… architecture enables the CDR to achieve large locking range and small jitter generation at the same time. The prototype is implemented in 0.18 üm CMOS technology and consumes 250 mW under 1.8 V supply. The jitter generation is 0.5 ps-rms and 4.8 ps-pp. The jitter peaking and jitter tolerance …
-
A Fully Synthesized Injection Locked Ring Oscillator Based on a Pulse Injection Locking Technique
… tunable oscillator and a pulse injection locking technique. The frequency tuning range of the free running oscillator is from 210 MHz to 1.8 GHz with a 1.1 volt power supply. The tuning range from 1.0 to 1.8 GHz can be achieved with 215 tuning steps with a maximum step size of 11.2 MHz, …
-
A PLL Design Based on a Standing Wave Resonant Oscillator
… accounted for. Our PLL provides a frequency locking range from 6 GHz to 9 GHz, with a center frequency of 7.5 GHz. The oscillator alone consumes about 25 mW of power, and the complete PLL consumes a power of 28.5 mW. The observed jitter of the PLL is 2.56 percent. These numbers are …
-
Design of CMOS integrated frequency synthesizers for ultra-wideband wireless communications systems
… and power efficiency. Finally, a novel injection locking frequency divider (ILFD) is presented. Im¬plemented with three stages in 0.18 µm CMOS technology, the ILFD draws 3¬mA current from a 1.8¬V power supply. It achieves multiple large division ratios as 6, 12, and 18 with all locking ranges …
-
Generation of a CW Local Oscillator Signal Using a Stabilized Injection Locked Semiconductor Laser
… Phase-Lock Loops (OPLL), Optical Injection Locking (OIL) with both Fabry-Perot and DFB lasers, and an Optical Injection Phase-Lock Loop (OIPLL). For this project I have implemented a method for regenerating a local oscillator from a portion of the received optical signal. This regenerated …
-
Analysis, simulation and design of nonlinear RF circuits
… simulation methods are proposed to capture the locking range of an ILFD, such as the Warped Multi-time Partial Differential Equation (WaMPDE) and the Multiple-Phase-Condition Envelope Following (MPCENV) methods. The MPCENV method is the more efficient and accurate simulation technique and it is …
-
Modulation of coherently coupled surface-emitting laser arrays: analysis and applications
… monolithic mutual optical injection locking induced laser dynamics in phased, coherently coupled implant-defined PhC VCSEL arrays are investigated in detail both theoretically and experimentally. A model based on the well-established injection-locking laser rate equations is used to …
-
Distributed-Feedback (DFB) laser stabilization using a ring resonator in silicon on insulator
… conditions. Using phase control extends the locking range and improves tolerance to parasitic reflections introduced using an on-chip MZI. The combined feedback and phase tuning allow single-mode operation up to approximately –5 dB of on-chip parasitic reflected power without an isolator. The …
Page 1 of 2