Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 21 for “"Lode angle"”.

  1. A Study on the Plasticity and Fracture of AISI 4340 Steel Under Different Loading Conditions Considering Heat Treatment and Micromechanics

    … the influence of hydrostatic stress and Lode angle on material plasticity and fracture. Scanning electron microscopy (SEM) observations were performed on both original and fractured specimens to investigate different micromechanical revelations and features. The plasticity model with …

    ucf Repository record for A Study on the Plasticity and Fracture of AISI 4340 Steel Under Different Loading Conditions Considering Heat Treatment and Micromechanics (opens in a new tab)

  2. Stress-State and Strain-Rate Dependent Multiscale Characterization of ARMOX 500T

    … for the parameterization of a triaxiality and lode angle parameter (LAP) dependent Generalized Incremental Stress-State Dependent Damage Model (GISSMO) for ARMOX 500T (AX500) armour steel. 100+ mechanical tests have been conducted which differentiate the effects of triaxiality, LAP, and …

    york Repository record for Stress-State and Strain-Rate Dependent Multiscale Characterization of ARMOX 500T (opens in a new tab)

  3. Stress-State and Strain-Rate Dependent Multiscale Characterization of ARMOX 500T

    … for the parameterization of a triaxiality and lode angle parameter (LAP) dependent Generalized Incremental Stress-State Dependent Damage Model (GISSMO) for ARMOX 500T (AX500) armour steel. 100+ mechanical tests have been conducted which differentiate the effects of triaxiality, LAP, and …

    york Repository record for Stress-State and Strain-Rate Dependent Multiscale Characterization of ARMOX 500T (opens in a new tab)

  4. INNOVATIVE CHARACTERIZATION AND ELASTOPLASTIC MODELLING OF METALS UNDER STATIC AND DYNAMIC CONDITIONS

    … also on the third stress invariant (normalized Lode angle X) which may affect at the same time the yielding and the ductile failure. In this research, a new accurate and easy-to-calibrate yield model is presented, in which the yield surface depends on the Lode Angle and, eventually, also on the …

    catania Repository record for INNOVATIVE CHARACTERIZATION AND ELASTOPLASTIC MODELLING OF METALS UNDER STATIC AND DYNAMIC CONDITIONS (opens in a new tab)

  5. A Study On The Plasticity And Fracture Behaviors Of Inconel 718 Under Multiaxial Stress And Extremely Low Cycle Fatigue Loadings

    … invariant of the deviatoric stress (related to Lode angle parameter) in plastic behavior and ductile fracture. Constitutive plasticity model proposed by Bai & Wierzbicki and the modified Mohr-Coulomb (MMC) ductile fracture model were adapted with several extensions. The plasticity model and …

    ucf Repository record for A Study On The Plasticity And Fracture Behaviors Of Inconel 718 Under Multiaxial Stress And Extremely Low Cycle Fatigue Loadings (opens in a new tab)

  6. Study on Ductile Fracture with Anisotropic and Strain Rate Effects in Manufacturing Processes

    … and an isotropic hardening correction by Lode dependence. A new all-strain based anisotropic fracture model is proposed based on the approach of linear transformation on plastic strain rate tensor. The strain rate effects in ductile fracture is considered as an extension of the modified …

    ucf Repository record for Study on Ductile Fracture with Anisotropic and Strain Rate Effects in Manufacturing Processes (opens in a new tab)

  7. Constitutive Modeling of the Densification Process of Ceramic Powders Subjected to Cold, Quasi-Static Pressing

    … coupling, cap evolution, pressure- and Lode angle-dependent plasticity, and hardening. To evaluate the constitutive model, a new method for measuring density in green bodies has been developed. This method utilizes readily-available laboratory equipment to produce density projection data …

    trento Repository record for Constitutive Modeling of the Densification Process of Ceramic Powders Subjected to Cold, Quasi-Static Pressing (opens in a new tab)

  8. A Mechanism-based Approach to Constitutive Modelling of Quasi-Brittle Geomaterials with and without Fibre Reinforcement

    … features of the material behaviour, including Lode-angle dependence, size effect and brittle-ductile transition can be considered as consequences stemming from the localised failure mechanism in several loading conditions. For geomaterials with fibre reinforcement (i.e., fibre reinforced …

    adelaide Repository record for A Mechanism-based Approach to Constitutive Modelling of Quasi-Brittle Geomaterials with and without Fibre Reinforcement (opens in a new tab)

  9. Development and implementation of advanced soft soil models in finite elements

    … S-CLAY1S model was proposed by incorporating Lode angle dependency failure criterion. This has improved the model predictions in failure condition especially in extension. A hybrid implicit numerical algorithm for the Sekiguchi-Ohta (SO) in-viscid/viscid models capable of robustly overcoming …

    strathclyde Repository record for Development and implementation of advanced soft soil models in finite elements (opens in a new tab)

  10. Multiaxial Characterization and Machine Learning – Enhanced Modeling of Anisotropic Materials for Forming Applications

    … of plastic strain, stress triaxiality, and Lode angle parameter are used to construct the ductile fracture surface. Chapter 4 develops novel experiment-efficient ANN frameworks to identify Yld2000-2D and Yld2004-18p parameters from heterogeneous strain fields generated by a single …

    unh-thes Repository record for Multiaxial Characterization and Machine Learning – Enhanced Modeling of Anisotropic Materials for Forming Applications (opens in a new tab)

  11. EXPERIMENTS AND MODELING OF PLASTIC ANISOTROPY AND DUCTILE FRACTURE UNDER MULTIAXIAL LOADING

    … of fracture parameters i.e., stress triaxiality, Lode angle parameter and equivalent plastic strain is not possible from experiments alone. Instead, these parameters at the onset of fracture are obtained in this work using finite element modeling with the material modeling framework using …

    unh-thes Repository record for EXPERIMENTS AND MODELING OF PLASTIC ANISOTROPY AND DUCTILE FRACTURE UNDER MULTIAXIAL LOADING (opens in a new tab)

  12. Quasi-Static Fracture Behaviour of AISI 304L and CA6NM

    … strain, average stress triaxiality and average Lode angle parameter over the load history. Initially, the fracture initiation point was assumed to be at the location of the maximum plastic equivalent strain of the FE analysis. However, fracture initiation at the critical location of the …

    liverpool-jm Repository record for Quasi-Static Fracture Behaviour of AISI 304L and CA6NM (opens in a new tab) Download PDF for Quasi-Static Fracture Behaviour of AISI 304L and CA6NM (opens in a new tab)

  13. Study On Anisotropic Plasticity And Fracture Of Lightweight Metal Sheets

    … fracture strain dependent on strain ratio or ? angle, instead of stress triaxiality and Lode angle parameter. The strain ratio or ? angle could be directly measured by digital image correlation (DIC), while the latter required finite element analysis to be determined. This method makes it …

    ucf Repository record for Study On Anisotropic Plasticity And Fracture Of Lightweight Metal Sheets (opens in a new tab)

  14. Phase-field modeling of fracture: regularization length insensitivity and mixed mode ductile fracture

    … implicitly includes the important effects of lode angle (via the maximum shear stress) and triaxiality (via the first principal stress and pressure) on the initiation and propagation of ductile fracture. Model predictions of slant and cup cone crack paths as well as load-displacement responses …

    colo-mines Repository record for Phase-field modeling of fracture: regularization length insensitivity and mixed mode ductile fracture (opens in a new tab)

  15. Anisotropy and Non-coaxial Behaviour of Sand Along Different Strain Paths

    … of the critical state even though the friction angle at phase transformation has been found to be similar to that at the critical state. The results revealed that the non-coaxial behaviour of soil is also influenced by the intermediate principal stress parameter (which could alternatively be …

    carleton Repository record for Anisotropy and Non-coaxial Behaviour of Sand Along Different Strain Paths (opens in a new tab)

  16. Analytical and Experimental Investigation of Low-Cycle Fatigue Fracture in Structural Steel

    The mechanism of metal material failure due to inelastic cyclic deformations is commonly described as Low-Cycle Fatigue (LCF). Fracture in steel structures caused by earthquakes can be associated with this mechanism. Mathematical expressions describing the material deterioration due to LCF are …

    vt Repository record for Analytical and Experimental Investigation of Low-Cycle Fatigue Fracture in Structural Steel (opens in a new tab)

  17. Verification of Plane Stress Material Model Behaviour in Solid 3D-Structures

    In the automotive industry, car crash simulations are an important tool to use in the development process. To accurately capture material behaviour, a well-calibrated material failure model must be used. Volvo Cars Corporation is currently using an advanced material failure model called “MF GenYld …

    chalmers Repository record for Verification of Plane Stress Material Model Behaviour in Solid 3D-Structures (opens in a new tab)

  18. Nesdružený model plasticity při predikci tvárného lomu kovových materiálů

    Tato dizertační práce se zabývá studiem použitelnosti modelů plasticity založených na asociativním a neasociativním zákonu tečení pro predikci tvárného lomu kovových materiálů. Nejprve je navrhnut nový izotropní model plasticity založený na neasociativním zákonu tečení, který zaručuje konvexnost …

    brno-tech Repository record for Nesdružený model plasticity při predikci tvárného lomu kovových materiálů (opens in a new tab)

Page 1 of 2