Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 12 of 12 for “"Long Glass Fiber"”.
-
Long glass fiber embedment in polycarbonate thermoplastic
… (thermoplastic) matrix, to achieve an 80% glass loading to a 20% wet-out for the polycarbonate pre-impregnated rod, to develop the prototype pultrusion equipment for polycarbonate pre-impregnated rod, and to develop the prototype pulforming equipment for polycarbonate fibersteel composite …
-
Modeling of Microstructures and Stiffness of Injection Molded Long Glass Fiber Reinforced Thermoplastics
… of the use of injection molded discontinuous fiber-reinforced thermoplastics. During the intensive injection molding process, severe fiber breakage arises in the plasticating stage leading to a broad fiber length distribution. Fiber orientation distribution (FOD) is another highly anisotropic …
-
Through Thickness Property Variations Of Compression Molded Long Glass Fiber Reinforced Polypropylene With Different Thicknesses
… corrosion resistance and ease of processing. Long fiber thermoplastics (LFTs) are a class of composites, which contain discontinuous reinforcements at a length above the critical fiber length for efficient load transfer to the reinforcement. These materials are gaining steady favor due to …
-
Transient Shear Flow Rheology of Concentrated Long Glass Fiber Suspensions in a Sliding Plate Rheometer
… at the startup of shear flow were performed on long glass fiber-filled polypropylene. Samples were prepared with fibers pre-oriented either in 1-direction, 3-direction or random in 1-3 plane, where the 1-direction is the direction of shear motion, the 2-direction is perpendicular to the shear …
-
Assessing an Orientation Model and Stress Tensor for Semi-Flexible Glass Fibers in Polypropylene Using a Sliding Plate Rheometer: for the Use of Simulating Processes
Great interest exists in adding long fibers into polymeric fluids due to the increase in properties associated with the composite, as compared to the neat resin. These properties, however, are dependent on the fiber orientations generated during processing, such as injection molding. In an effort …
-
Optimization of Mechanical Properties of Polypropylene-based Composite
… the optimal values of mechanical properties of long glass fiber-reinforced polypropylene composite (LGFPP) and polymer-layered silicate nanocomposites (PP-OMMT) for different objectives. Though the primary objective was to minimize the cost of the composite, simulations were also performed to …
-
Manufacturing of vegetable oils-based epoxy and composites for structural applications
… polymers than polymers obtained using ESO. Glass transition temperatures (Tg) of the VO-based epoxy thermoset polymers were mostly a function of monomer oxirane content with some added structural influences of epoxy reactivity, and presence of a pendant chain. Organo-modified montmorillonite …
-
Improved Prediction of Glass Fiber Orientation in Basic Injection Molding Geometries
… concerned with the prediction of short (SGF) and long glass fiber (LGF) orientation in a center-gated disk and end-gated plaque injection molding test geometry using a simulation method that has not been attempted previously. Previous work has used assumptions to simplify the fiber orientation …
-
Extension of the Method of Ellipses to Determining the Orientation of Long, Semi-flexible Fibers in Model 2- and 3-dimensional Geometries
The use of fiber-reinforced polymer composites formed via injection molding is of increasing interest due to their superior mechanical properties as compared to those of the polymer matrix alone. These mechanical properties, however, are strongly dependent on the fiber length and orientation …
-
Integrated prediction of processing and thermomechanical behavior of long fiber thermoplastic composites
Long fiber reinforced thermoplastic composites (LFT), are one of the fastest growing segments in the plastics markets. The use of these materials has been increasing, especially in the automotive industry, due to their excellent specific mechanical properties (stiffness, strength and impact …
-
Using Non-Lubricated Squeeze Flow to Obtain Empirical Parameters for Modeling the Injection Molding of Long-Fiber Composites
The design of fiber-reinforced thermoplastic (FRT) parts is hindered by the determination of the various empirical parameters associated with the fiber orientation models. A method for obtaining these parameters independent of processing doesn't exist. The work presented here continues efforts to …