Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 25 for “"Longitudinal Joints"”.

  1. Rehabilitation of Longitudinal Joints in Double-Tee Girder Bridges

    … the potentially lower overall cost. However, the longitudinal joints of these bridges are rapidly deteriorating with many needing replacement before the expected 75- year service life. Research was conducted at South Dakota State University (SDSU) to develop, construct, and evaluate the …

    sdstate Repository record for Rehabilitation of Longitudinal Joints in Double-Tee Girder Bridges (opens in a new tab)

  2. INNOVATIVE NONDESTRUCTIVE TESTING (NDT) FOR CONDITION ASSESSMNET OF LONGITUDINAL JOINTS IN ASPHALT PAVEMENTS

    The failure of longitudinal construction joints is one of the critical factors causing accelerated pavement deterioration. Poor-quality longitudinal construction joints are often characterized by a difference in elevation between adjacent lanes or by unraveling of the hot mix asphalt (HMA). Current …

    waterloo Repository record for INNOVATIVE NONDESTRUCTIVE TESTING (NDT) FOR CONDITION ASSESSMNET OF LONGITUDINAL JOINTS IN ASPHALT PAVEMENTS (opens in a new tab)

  3. Investigation of Longitudinal Joints Between Precast Prestressed Deck Bulb Tee Girders Using Latex Modified Concrete

    … pour material with a U-bar connection detail in longitudinal joints between precast deck bulb tee bridge girders with integral concrete decks. The objective was to determine if the joint detail was capable of resisting service shear and moment stresses as well as eliminate the formation of cracks …

    south-carolina Repository record for Investigation of Longitudinal Joints Between Precast Prestressed Deck Bulb Tee Girders Using Latex Modified Concrete (opens in a new tab)

  4. Investigation of Ultra-High Performance Concrete for Longitudinal Joints in Deck Bulb Tee Bridge Girders

    In recent decades, many state DOTs have implemented ultra-high performance concrete (UHPC) in bridge construction because of its advanced mechanical properties beyond those of conventional concrete. The Federal Highway Administration (FHWA) has extensively tested a proprietary class of UHPC, but …

    washington Repository record for Investigation of Ultra-High Performance Concrete for Longitudinal Joints in Deck Bulb Tee Bridge Girders (opens in a new tab)

  5. Nondestructive Evaluation of Asphalt Pavement Joints Using LWD and MASW Tests

    Longitudinal joints are one of the critical factors that cause premature pavement failure. Poor-quality joints are characterized by a low density and high permeability; which generates surface distresses such as ravelling or longitudinal cracking. Density has been traditionally considered as the …

    waterloo Repository record for Nondestructive Evaluation of Asphalt Pavement Joints Using LWD and MASW Tests (opens in a new tab)

  6. Evaluation of an innovative joint design for the adjacent box beam bridges

    … with this type of bridge is the cracking in the longitudinal joints between adjacent beams, resulting in reflective cracks forming in the asphalt wearing surface or concrete deck. AASHTO (2014) states that the differential shrinkage due to differences in age, concrete mix, environmental …

    iastate Repository record for Evaluation of an innovative joint design for the adjacent box beam bridges (opens in a new tab)

  7. Hot mix asphalt longitudinal joint specifications: Improving longitudinal joint density in the State of Minnesota

    Asphalt pavement longitudinal joints are a critical factor in the long-term performance of the pavement. The creation of longitudinal joints is almost unavoidable. The Federal Highway Administration (FHWA), Department of transportation (DOTs), contractors, and suppliers, prioritize achieving the …

    iastate Repository record for Hot mix asphalt longitudinal joint specifications: Improving longitudinal joint density in the State of Minnesota (opens in a new tab)

  8. Precast Bridge Girder Details for Improved Performance

    … strength and performance characteristics of the longitudinal joints used to join adjacent double tee girders. The SDDOT currently uses a double tee precast/prestressed bridge girder with a longitudinal joint that consists of discrete welded steel connections. The design service life of these …

    sdstate Repository record for Precast Bridge Girder Details for Improved Performance (opens in a new tab)

  9. Improved models for analysis of load and thermal effects on concrete pavement

    … sub-structures, have transverse and longitudinal joints at regular intervals. In the design and the analysis of concrete pavement, analytical solutions obtained from single-slab models have been widely adopted. One major shortcoming of single-slab models is that the effects of joint …

    nus Repository record for Improved models for analysis of load and thermal effects on concrete pavement (opens in a new tab) Download file for Improved models for analysis of load and thermal effects on concrete pavement (opens in a new tab)

  10. Investigation of shrinkage-compensating cement concrete from material and structural perspectives

    <p>Longitudinal joints used to connect adjacent box beams in bridges are known to experience cracks due to a variety of environmental and mechanical stressors, including diurnal temperature changes, hydration, drying shrinkage, restrained shrinkage, and traffic loads. Such cracks can open a direct …

    iastate Repository record for Investigation of shrinkage-compensating cement concrete from material and structural perspectives (opens in a new tab)

  11. An investigation of reflective cracking and empirical development of design specifications for precast composite slab span system (MnDOT PCSSS) superstructures.

    … cracking at the discontinuities created by the longitudinal joints between adjacent precast panels. Also considered during this study included the effects and necessity of horizontal tie reinforcement on the development of composite action in the PCSSS. This paper describes the laboratory …

    umn Repository record for An investigation of reflective cracking and empirical development of design specifications for precast composite slab span system (MnDOT PCSSS) superstructures. (opens in a new tab)

  12. Evaluation of Asphalt Longitudinal Joint Construction and Practices in South Carolina

    Joints are the weakest area of an asphalt pavement and longitudinal joint cracking occurs for a number of reasons that lead to low density, low indirect tensile strength, and high permeability at the joint. The purpose of this study was to evaluate the different joint construction used in South …

    clemson Repository record for Evaluation of Asphalt Longitudinal Joint Construction and Practices in South Carolina (opens in a new tab)

  13. Development of DBT Bridge System with Continuous Joints for Accelerated Construction

    … limited research and concerns about the use of longitudinal joints as well as intermediate diaphragms limit widespread of the DBT bridge system.</p> <p>This dissertation presents a study of the continuous for both moment and shear transfer longitudinal joint detail and the optimized use of …

    utk-theses Repository record for Development of DBT Bridge System with Continuous Joints for Accelerated Construction (opens in a new tab)

  14. A New Approach to Longitudinal Connection for Adjacent Box Girder Bridges

    Deterioration of longitudinal joints between adjacent box girder bridges is a common problem in the US. Current longitudinal connections involve the use of grouted shear keys between beams and transverse post-tensioning of superstructure spaced out along the span. Precast/Prestressed Concrete …

    buffalo Repository record for A New Approach to Longitudinal Connection for Adjacent Box Girder Bridges (opens in a new tab)

  15. Behavior of adjacent precast prestressed concrete box girder bridges

    … and leakage have been reported along the longitudinal joints between adjacent boxes in a number of bridges. The cracking and leakage are mainly due to inadequate design and detailing of the transverse connection between adjacent boxes, which eventually lead to premature deterioration of …

    nebraska Repository record for Behavior of adjacent precast prestressed concrete box girder bridges (opens in a new tab)

  16. Application of the rolling dynamic deflectometer to determining the rehabilitation design of rigid airport pavements

    … All six lanes of Runway 16/34 were profiled longitudinally. After this testing of Runway 16/34 was completed, additional testing was conducted on the north end of the runway to observe the response of the airfield pavement along longitudinal joints under dynamic loading. Typically, the RDD …

    texas Repository record for Application of the rolling dynamic deflectometer to determining the rehabilitation design of rigid airport pavements (opens in a new tab)

  17. Compaction Effects on Uniformity, Moisture Diffusion, and Mechanical Properties of Asphalt Pavements

    … on laboratory measurements. The compaction of longitudinal joints was investigated, and recommendations were put forward to improve joint compaction. The air void distributions in gyratory specimens were related to the mixture mechanical properties measured using the Overlay and Hamburg tests. …

    tamu Repository record for Compaction Effects on Uniformity, Moisture Diffusion, and Mechanical Properties of Asphalt Pavements (opens in a new tab)

  18. Investigation of ultra-high performance concrete from material and structural perspectives

    … performed on structural application of UHPC in longitudinal joint of an innovative tee beam design bridge. The test setup consists of two tee beams, which are 14 m (46 ft) long and 1.76 m (5.76 ft). The beams are connected at the flanges by a longitudinal UHPC joint. The reinforcement in the …

    iastate Repository record for Investigation of ultra-high performance concrete from material and structural perspectives (opens in a new tab)

  19. Numerical and experimental analysis of the mechanical behaviour of linings in quasi-rectangular shield tunnels

    … distributions and a parametric analysis. The joints transform the lining into a non-continuous structure, and many accidents initiate from joint’s damages. Therefore, the joint is regarded as being the most critical part of a shield tunnel. Due to the section shape of a QRST, its longitudinal …

    ghent Repository record for Numerical and experimental analysis of the mechanical behaviour of linings in quasi-rectangular shield tunnels (opens in a new tab)

Page 1 of 2