Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 60 for “"Longitudinal waves"”.
-
Nonlinear Behavior of Longitudinal Waves in the Oscillations of Rijke Tube
… Schlieren techniques) of traveling shock-like waves in axial mode instability, 2) correlation of the observed waves with spectral components similar to that of sawtooth structure, and 3) theoretical calculations showing that the limit amplitude phenomenon is directly related to the cascade of …
-
On the Measurements of the Velocity of Longitudinal Waves in Water Contained in Glass and Aluminium Tubes, at Low Frequencies.
An experimental arrangement for measuring the velocity of sound in water by developing an acoustic standing wave in vertical water columns contained in glass and aluminium tubes had been established at low frequencies.
-
Experimental characterization of creep damage using the nonlinearity ultrasonic technique
… needed. Nonlinear acoustic techniques employing longitudinal waves have been proven to be sensitive to creep damage. The objective of this research is to develop a robust experimental procedure to reliably measure the acoustic nonlinearity parameter using longitudinal waves, and then to validate …
-
Guided Wave Propagation in Tubular Section with Multi-Layered Viscoelastic Coating
Three kinds of propagating waves physically admissible in a tubular section are derived to establish their dispersion characteristics in response to the presence of multi-layered viscoelastic coatings. One is the longitudinal wave that propagates in the axial direction. The other two are shear and …
-
Modeling of Shock Wave Propagation and Attenuation in Viscoelastic Structures
… These experiments involve the propagation of longitudinal waves through elastic and viscoelastic rods, and behavior of elastomeric mechanical filters subjected to shock. Comparison of model predictions to theory and experiments confirm that ADF-based finite element models are capable of …
-
Mechanical wave velocity dispersion in rods and extension of the resonant bar method to 800 KHz: a study of the velocity dispersion of longitudinal waves in rods, and a feasibility study of extending the Resonant Bar method of internal friction measurement to 1 MHz
… of the velocity dispersion of the fundamental longitudinal mode in rods of appropriate size in the region where the wavelength is of the same order of magnitude as the diameter. It is shown that the velocity dispersion of the fundamental longitudinal mode in a cylindrical rod obeys the exact …
-
Structural loading of cross deck connections for trimaran vessels
… possible structural loading cases including: longitudinal bending, transverse bending, torsional bending, spreading and squeezing of hulls, inner and outer hull slam pressures, wet deck slam pressures, loading from ship's motions, and whipping of slender hulls. This work investigates wave …
-
Ultrasonic analysis and modal inspection of lithium ion pouch cells
… configurations generated and received ultrasonic waves at 215 kHz guided waves, 1 MHz bulk longitudinal waves, and 1.1 MHz bulk shear waves. These results represent one of the first documented studies to successfully generate and analyze shear wave propagation in lithium-ion pouch cells, expanding …
-
Generation of microwave ultrasonics with ferromagnetic thin film transducers
Acoustic waves at 9.07 Gc have been generated in thin ferromagnetic films of nickel and monel. The phonon pulses are produced upon spin-wave or ferromagnetic resonance by a magnetostrictive coupling. Both transverse and longitudinal waves have been observed at several angles of magnetic field with …
-
Evaporation of Binary Mixtures and Precision Measurement by Crystal Resonator
… by the impedance response of the shear and longitudinal waves emitted from the resonator. The result on the binary mixture presents a simplified model system for further investigations of complicated evaporation kinetics involving complex fluids or multi-component fuel systems.
-
Ultrasonic attenuation in superconducting zinc
… the ultrasonic attenuation of 10 and 30 Mcs/sec longitudinal waves by pulsed-echo techniques were made on a 99.999% pure single crystal of superconducting zinc in the [0001] direction as a function of temperature from 4.2°K to 0.320°K using an open-ended type He3 cryostat. The attenuation was …
-
Spectrum analysis of ultrasonic waves scattered from geometrical discontinuities
<p>Scattering of ultrasonic waves from discontinuities is a fundamental physical problem. In this thesis the results of scattering from two different types of discontinuities are analyzed and compared to two approximation theories.</p><p>These theories, Keller's geometrical theory of diffraction …
-
Measurement of ultrasonic wave mode transition in unidirectional graphite/epoxy composites
… and the wave type (quasi-transverse and quasi-longitudinal waves) at 5 MHz frequency. But the attenuation coefficient, expressed in units of reciprocal length, does depend on the wave type and the wave vector orientation because the wave velocity is included in the calculation of this …
-
A comparison of second-order numerical methods applied to the Korteweg-de Vries equation
… phenomena such as collision-free hydromagnetic waves and longitudinal waves and it has been solved using many different numerical methods.</p> <p>In this paper, we use a Fourier expansion method of approximately solving the Korteweg-de Vries equation, coupled with a choice of two second-order …
-
Estudo das características estocásticas do roll paramétrico
… and pitch motions under regular and irregular longitudinal waves. Especial effort has been made in capturing in an accurate and efficient manner the restoring actions in the developed models. This is a fundamental feature required in order to reproduce numerically the parametric roll resonance …
-
Nondestructive evaluation of bar-concrete interface in reinforced concrete structures
… GFRP) bar and concrete using ultrasonic guided waves is investigated in this study. These waves can propagate a long distance along the reinforcing steel (or GFRP) bar or concrete beam as guided waves and are sensitive to the interface bonding condition between the steel (or GFRP) bar and …
-
Nonlinear Ultrasonic Non-Destructive Evaluation: Understanding the limitations and improving the metrology of nonlinear ultrasound
… (i.e., collinear wave mixing of shear and longitudinal waves). Using numerical, theoretical and experimental approaches, the effect of the input waveform was shown to affect the measured nonlinear signal, which could lead to an underestimation of the calculation of the absolute level of …
-
Nonlinear ultrasonic testing using a non-collinear approach: application to heat treatment of steels and to asphalt concrete mixtures
… cooling, and oven cooling. Torsional acoustic waves were excited in through transmission for each bar, and the acoustic attenuation was obtained by fitting exponential curves to the maximum amplitude peaks of the first three reflected time signals. Attenuation values were obtained, compared, …
-
Modelo numérico de efeitos hidrodinâmicos em escoamentos internos e externos
… and internal flows to a ship under regular waves. The numerical model consists of the coupling of two methods with different nature, which were evaluated independently in a first stage. The first one is the time domain method based on the panel method and potential theory to calculate the …
Page 1 of 3