Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 193 for “"Loss factor"”.
-
Panel Damping Loss Factor Estimation Using The Random Decrement Technique
… Technique (RDT) for estimating panel damping loss factors ranging from 1% to 10% is examined in a systematic way, with a focus on establishing the various parameters one must specify to use the technique to the best advantage. Throughout, loss factors are estimated in full or 1/3rd octave …
-
Evaluation of Loss Factor Estimation Techniques for Free Hanging Flat Panels Excited Mechanically
… the "best" technique to estimate a damping loss factor for mechanically-excited panels, three loss factor estimation techniques--PIM, IRDM, and RDT--are compared. In experimental and computational analyses, panels with two damping levels and three sizes were tested. The loss factor estimates …
-
Effects of capture, power loss factor, and variable transmit power level in multiple-access systems
… monotonically with i. The effect of the power loss factor, β, on different spatial distribution and capture models is studied. It is shown that in a noiseless system, qi increases with β for the two capture models considered. A new spatial distribution, referred to as the inverse-distance …
-
Effect of Manufacturing Processes on the Loss Factor and Other Mechanical Properties of Kenaf Fiber-Reinforced Composites
The characteristics essential for manufacturing parts and products are not well known for natural fiber-reinforced composite materials. Natural fibers display properties similar to glass fibers, and present a more environmentally friendly option for manufacturing composite materials. This research …
-
Parameter Study on Topology Optimization of Constrained Layer Damping Treatments
… conditions in order to maximize the damping loss factor for the first vibrating mode of the base structure. Different parameter studies are carried out for the two boundary conditions and conclusions are drawn based on the loss factor results and the novel topologies that emerge from these …
-
Damping of Vibration in Sandwich Cylinder
… included varying both shear modulus and material loss-factor for the core viscoelastic layer. The effects of varying core shear modulus and material loss-factor on the natural frequencies and their corresponding modal loss-factor are investigated. It would [sic] useful for obtaining an optimized …
-
Dielectric characteristics of two BC coastal species during radio frequency heating
… study was to evaluate the dielectric properties (loss factor) of two British Columbian softwoods (western hemlock [Tsuga heterophylla (Raf.) Sarg.] and western red cedar [Thuja plicata Donn]) at different moisture content, temperature, and electric field strength levels. This study is expected to …
-
Analysis and Optimization of Partial Length, Constrained Damping Layers
… method in order to determine normalized loss factor values. The loss parameter (normalized loss factor) is shown to be a function of the shear parameter (<em>g<sub>N</sub></em>), the geometric parameter (<em>Y<sub>N</sub></em>), the normalized coverage length (<em>x/L</em>), coefficients …
-
A method for determining material damping from driving point measurements
… the effect of air damping. The material damping loss factor was extracted from the test results and compared with results obtained from a different test method for the same materials. The loss factor determined for the aluminum specimen was also compared with the loss factor predicted by the …
-
A study of uncertainty in applications of statistical energy analysis
… as applied to the model, the choice of coupling loss factors, the centre frequency and the analysis bandwidth (i.e., the number of modes involved). Since fine details of systems under analysis are not represented in the theoretical models, SEA may be considered to produce the ensemble average …
-
Developments Towards Low Loss Suspensions for Laser Interferometric Gravitational Wave Detectors
… of the detector. Taking a value of the intrinsic loss factor of &phis;internal (o) = 2 x 10-7 for fused silica, we can show that the thermal noise due to this loss results in a motion of one test mass of &phis;internal(o) = 7 x 10-20m/√Hz at 50 Hz. The loss factors associated with the modes of the …
-
Mechanical Properties of Kenaf Composites Using Dynamic Mechanical Analysis
… The flexural storage modulus, the flexural loss modulus, and the loss factor were reported. Generally as the fiber volume fraction of kenaf increased, the flexural storage and flexural loss modulus increased. The loss factor remained relatively constant with increasing fiber volume fraction. …
-
Dielectric loss determination using perturbation
… used to estimate the dielectric constant and loss factor over a wide range of frequencies of a dielectric material which fills the cavity structure [Saed, 1987]. A full field analysis is used to compute the effective complex permittivity of the sample material based on reflection coefficient …
-
Damping Estimation of Plates for Statistical Energy Analysis
… are used to evaluate how the accuracy of damping loss factor estimation for plates is affected with respect to various processing parameters, such as the frequency resolution, the frequency bandwidth, the number of measurement locations, and the signal to noise ratio. In several computational …
-
Impact noise reduction in cross laminated timber by embedding acoustic black holes
… show a clear trend in radiated sound power at a loss factor of 0.03. However, with a higher loss factor (0.2), the trend favors maximizing the indentations. Increasing the outer radius shifts the structural response to lower frequencies, but the acoustic response remains unpredictable at a loss …
-
Passive Viscoelastic Constrained Layer Damping Application for a Small Aircraft Landing Gear System
… to establish approximate storage modulus and loss factor data at varying loading frequencies. The three viscoelastic polymers having the highest loss factor to shear modulus ratio were chosen and tested using a cantilever beam system. A Ross, Kerwin, and Ungar analysis was used to predict the …
-
A COMPARISON OF RESONANT AND NON-RESONANT DUAL ACTIVE BRIDGE TOPOLOGIES FOR SINGLE PHASE MICROINVERTERS
… two figures of merit relating to converter losses namely conduction loss factor (CLF) and switching loss factor (SLF). It was found that the CLF in resonant designs can be reduced compared to non-resonant designs, while both cases support near minimization of SLF, hence the efficiency can be …
Page 1 of 10