Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 36 for “"Louvers"”.

  1. Automatic detection of bends in louvers using range imaging

    … closed. Shutters let light through because the louvers used to construct them are not straight. To this end, it is important to detect bends in louvers before they are used in constmction of shutters. Current methods of detecting bends are subjective and inadequate. So, we have proposed a …

    ttu Repository record for Automatic detection of bends in louvers using range imaging (opens in a new tab)

  2. Indoor Natural Light Performance of Clerestory Mounted Dynamic Thermally Adaptive Light Louvers

    … an analysis of a clerestory (without light louvers) and different light louver configurations (fixed flat light louver, fixed curved light louver, and dynamic thermally adaptive light louver), and their impact on daylight factors in various seasons is presented. The results showed that the …

    ku Repository record for Indoor Natural Light Performance of Clerestory Mounted Dynamic Thermally Adaptive Light Louvers (opens in a new tab)

  3. The Effect of Shading Louvers and Compact Silencers as Noise Barriers in a Ventilated Double Skin Façade

    … topic aims to explain the effect of shading louvers and compact silencers as noise barriers in ventilated buildings for indoor air quality and acoustical quality. This study is intended to investigate the multidimensional aspects needed to improve ventilation potentials and acoustical …

    ku Repository record for The Effect of Shading Louvers and Compact Silencers as Noise Barriers in a Ventilated Double Skin Façade (opens in a new tab)

  4. Natural ventilation through windows in a classroom (CFD analysis crossventilation of asymmetric openings: Impact of wind direction and louvers design)

    … in a façade such as an angle and geometry of louvers, building orientation and wind direction. Therefore, the geometry of louvers and wind direction can have a considerable influence on the cross-ventilation flow. Many studies on natural ventilation have been released in the past, however, a …

    ttu Repository record for Natural ventilation through windows in a classroom (CFD analysis crossventilation of asymmetric openings: Impact of wind direction and louvers design) (opens in a new tab)

  5. Flow, Heat Transfer, and Pressure Drop Interactions in Louvered-Fin Arrays

    … pressure drop; and the effect of using convex louvers rather than flat (offset-strip) fins. Flow visualization is performed using dye in a water tunnel, and pressure drop is measured in a wind tunnel. Heat transfer is inferred from mass transfer data obtained using the naphthalene sublimation …

    uiuc Repository record for Flow, Heat Transfer, and Pressure Drop Interactions in Louvered-Fin Arrays (opens in a new tab)

  6. Heat Transfer Measurements and Optimization Studies Relevant to Louvered Fin Compact Heat Exchangers

    … is typically the air side of the heat exchanger, louvers are manufactured into the fins. Louvered fins initiate the growth of new boundary layers such that the average convective heat transfer coefficient is higher than that which would occur for a continuous fin. Approximately 85% of the total …

    vt Repository record for Heat Transfer Measurements and Optimization Studies Relevant to Louvered Fin Compact Heat Exchangers (opens in a new tab)

  7. Spatially Resolved Heat Transfer Studies in Louvered Fins for Compact Heat Exchangers

    … affected the heat transfer of individual louvers. In the entrance region of the louvered array, the effects of the flow field were dominant while in the fully developed region of the louvered arrays, the effects of the thermal field were dominant. A companion two-dimensional CFD study …

    vt Repository record for Spatially Resolved Heat Transfer Studies in Louvered Fins for Compact Heat Exchangers (opens in a new tab)

  8. Study of heave acceleration/velocity control for the surface effect ship.

    … only and is based on controlled venting by louvers to dampen heave accelerations while the main fan rpm is changed to maintain the minimum draft necessary to hold the speed constant at or near the initial value.

    nps Repository record for Study of heave acceleration/velocity control for the surface effect ship. (opens in a new tab)

  9. Influence of outlet geometry on cooling and pressure drop in a 5G radio device_ An experimental and CFD study on the pressure drop and heat transfer associated with forced air flow through a 5G remote radio device at Ericsson AB

    … is observed. Four outlet geometries (Hexagonal, Louvers, Tall stripes, Uni-gill) are studied both experimentally and by steady-state Computational Fluid Dynamics (CFD) simulations at Ericsson AB. The experimental tests were performed to simulate the heat generation within the radio device and a …

    chalmers Repository record for Influence of outlet geometry on cooling and pressure drop in a 5G radio device_ An experimental and CFD study on the pressure drop and heat transfer associated with forced air flow through a 5G remote radio device at Ericsson AB (opens in a new tab)

  10. Noise Sources Characterization of Automotive HVAC Systems

    … system has three main outlet ducts equipped with louvers and operates in two modes of bypass and recirculation. The inlet and outlet sides of the rear system are both located in the cabin; hence, it always works only on the recirculation mode. The outlet duct of the rear system is covered by a …

    mcmaster Repository record for Noise Sources Characterization of Automotive HVAC Systems (opens in a new tab)

  11. Pulseback of panel bed contactor for carbon and water

    … carbon retained within a set of parallel louvers. Construction permits contaminants in the entering stream of water to be adsorbed on carbon particles, starting from the entrances of the spaces between the louvers. A pulseback technique is used to remove the region containing …

    vt Repository record for Pulseback of panel bed contactor for carbon and water (opens in a new tab)

  12. Modeling and daylighting design of a new window with integrated controllable louver system

    … VisionControl®, integrates controllable aluminum louvers between two panes of glass, and is currently available on the market. This study starts by redesigning the VisionControl® window to reduce its overall thickness in order to enable its applications in commercial curtain walls and retrofit …

    concordia Download PDF for Modeling and daylighting design of a new window with integrated controllable louver system (opens in a new tab)

  13. Cooling tower recirculation as influenced by the local atmospheric flow field, a numerical study

    … of the stack effluent into the tower intake louvers. This recirculation results from a portion of the warm saturated effluent leaving a mechanical draft cooling tower and being reintroduced into the tower by the large captive eddy and corresponding pressure gradients downwind of the tower. …

    utk-theses Repository record for Cooling tower recirculation as influenced by the local atmospheric flow field, a numerical study (opens in a new tab)

  14. Pulseback cleaning of panel bed filter for treating a liquid

    … entry of water were provided by vertical support louvers. A pulseback technique was used to rid the liquid entry surface of the sand. The pulseback consisted of a reverse transient flow of liquid across the panel bed of sand. The time of duration of the pulseback was a maximum of 100 milliseconds. …

    vt Repository record for Pulseback cleaning of panel bed filter for treating a liquid (opens in a new tab)

  15. An experimental study of lifting and moving forces in air conveying systems

    … experiments are limited to straight holes and louvers located under the bottom of aluminum concave-bottom cans. In some tests, a flat disc has been fixed to the bottom of the cans. Measurements are made of the can motion on an actual section of conveyor.

    vt Repository record for An experimental study of lifting and moving forces in air conveying systems (opens in a new tab)

  16. Performance investigation of a naturally driven building ventilation terminal.

    … identified as the louver angle, distance between louvers and the number of louvers (now subject to patent number 0809311.4). Each of these geometrical variations provided an increase in performance over the benchmark case in the range of 27 - 45%. An optimum configuration of these parameters did …

    sheffield-hallam Download PDF for Performance investigation of a naturally driven building ventilation terminal. (opens in a new tab)

  17. Performance evaluation of louvered fin compact heat exchangers with vortex generators

    … Fluid Dynamics - CFD) were performed. The louvers affect the main flow, while the delta winglets reduce the wake regions downstream of the tubes. The generated vortices cause three important mechanisms of heat transfer enhancement: a better mixing, a reduction of the thermal boundary layer …

    ghent Repository record for Performance evaluation of louvered fin compact heat exchangers with vortex generators (opens in a new tab)

  18. Simulação de desempenho luminoso para salas de aula em Natal-RN

    … horizontal overhang with three horizontal louvers, double standard horizontal overhang, double standard horizontal overhang with three horizontal louvers, plus the use of shelf light in half the models with WWR of 40% and 50%. The data was organized in spreadsheets, with two intervals of …

    brazil-ufrn Repository record for Simulação de desempenho luminoso para salas de aula em Natal-RN (opens in a new tab)

  19. Optimization of Natural Ventilation Design in Hot and Humid Climates Using Building Energy Simulation

    … ducts and ventilation windows, appropriate louvers and duct fittings, as well as their optimal aspect ratios, should be taken into consideration. For future research to be able to extend to incorporate a wider range of climate conditions, a hybrid ventilation approach integrating both …

    hawaii Repository record for Optimization of Natural Ventilation Design in Hot and Humid Climates Using Building Energy Simulation (opens in a new tab)

Page 1 of 2