Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 50 for “"Low Dark Current"”.
-
Molecular-beam epitaxial growth of low-dark-current avalanche photodiodes
… of InGaAs using molecular-beam epitaxy for low-dark-current avalanche photodiodes through the study of the effects of the growth conditions on dark current. An optimum growth temperature of 545°C and arsenic beam equivalent pressure of 2x10⁻⁵ Torr was found for producing the lowest dark …
-
Organic semiconductor bulk heterojunction diodes with low dark current for photovoltaic, photodetection, and scintillator-free ionizing radiation detection applications
… of carriers that leads to the reverse saturation current. Organic photodetectors that define the state-of-the-art in terms of dark current density (JDark on the order of 6 pA/cm2) and specific detectivity (D* > 10^14 Jones at visible wavelengths) are demonstrated by employing a donor-acceptor pair …
-
Development and analysis of ZnO-based semiconductor photodetectors for UV detection
… photodetectors for UV detection with low dark current, high responsivity, and fast response time. To achieve this objective, an understanding of carrier recombination and transport mechanisms of the devices is necessary by investigating their electrical properties and optical …
-
High performance 1300 nm photodetectors grown by molecular beam epitaxy
… operating at 1.3 µm on GaAs substrates with low noise, low dark current, high quantum efficiency and high bandwidth are very attractive for applications in long haul, fiber optic communication systems. GaAsSb is a promising material for 1.3 µm emission and absorption on GaAs substrates. …
-
Hybrid Amorphous-Selenium/CMOS Low-Light Imager
This thesis aims to demonstrate a low-light imager capable of moonlight-level imag- ing by combining a custom-designed complementary-metal-oxide-semiconductor (CMOS) pixel array with amorphous selenium (a-Se) as its photosensor. Because of the low dark current of a-Se compared to standard silicon …
-
Organic Semiconductor Detector for Large Area Digital Imaging
… both the sensor and display markets due to its low cost and simple fabrication techniques. The ability to fabricate organic semiconductor devices such as photodetectors and transistors on a flexible, lightweight substrate makes them less fragile and ideal candidates for portable large-area …
-
Investigation on performance enhancement of micro-sized IR photodetectors
… high responsivity, high transmission speed, and low dark current, InP/InGaAs p-i-n photodetectors (PD) have been used as a promising technology for many applications, including optical communication and various imaging applications, for over two decades. In the following optoelectronic devices …
-
GERMANIUM-TIN BASED OPTOELECTRONIC INTEGRATION PLATFORM FOR INFRARED (TWO MICRON WAVELENGTH) APPLICATIONS
… of 525 mA/W, high 3-dB bandwidth of 6 GHz, low dark current of 5.7 µA, the electro-absorption modulator with the extinction ratio of 2.02 dB and 3-dB bandwidth of 2.8 GHz. At the meantime, the monolithically integrated platform takes a big step towards high-performance and low-cost …
-
Solution-processed Visible-blind UV-A Photodetectors Based on CH3NH3PbCl3 Perovskite Thin Films
… thermal annealing method under low temperature. The films exhibited cubic crystalline structure and pinhole-free morphologies. The possible charge traps were investigated via the analysis of photoluminescence (PL) spectra of perovskite films prepared with different lead chloride …
-
Low noise avalanche photodiodes with an impact-ionization-engineered multiplication region
… given that the multiplication noise is low. Impactionization-engineering (I2 E) is a novel approach that incorporates materials with different impact ionization threshold energies (Eth) into the multiplication region of APDs for low noise, high gain, and low dark current. A series of …
-
Small molecule organic acceptors: relating chemical structure with thin film device performance
… present in O IDTBR have given the material, allowing it to deliver high mobilities in OTFTs, are highlighted.</p> <p>The third part of this thesis focuses on organic photodetectors (OPD), a relatively recently explored application for NFAs. Very little is currently known about the impact of OSC …
-
FREQUENCY RESPONSE CHARACTERIZATION OF GaAs MSM PHOTODETECTOR ARRAYS: TEST FACILITY AND EXPERIMENTAL RESULTS
… to its ease of fabrication and integration, its low dark current and noise, and its speed. Measurements for three detector sizes and two array sizes consistently showed that MSM detectors exhibit a position dependent response as part of an array. If the array is terminated in a load at one end of …
-
Indium phosphide based photodiodes for mid-wave infrared detection
… temperatures close to room temperature. Current MWIR detectors are made from the mercury-cadmium-tellurium material system. These detectors suffer from poor uniformity and high fabrication costs associated with difficult device processing. MWIR detectors on Indium Phosphide substrates can …
-
Neuromorphic Artificial Visual Systems using 2D Materials
… electromagnetic spectrum, while maintaining a low dark current. Both the devices exhibit optical stimulation-controlled short term and long term potentiation, electrically driven long term depression, synaptic weight update and all other necessary synaptic characteristics. An artificial neural …
-
Monolithic Integration of Long Wavelength Photodetectors and High Electron Mobility Transistors on Metamorphic Gallium Arsenide Substrates
… drift region enabled photodiodes to achieve a low dark current of 500 pA, a responsivity of 0.6 A/W, and a -3 dB bandwidth of 38 GHz at -5 V reverse bias for 1.55 mum light. The photodiode heterostructure optimized for higher bandwidth by scaling the thickness of undoped In0.53Ga0.47 As and …
-
Noise-limited performance of a hybrid detector and high-resolution display monitors.
… photomultiplier tube (PMT) provides a high gain, low noise and low dark current. The hybrid tube had a maximum gain of 8 x 10⁶, a noise factor of 1.64 and an information capacity of 1.3 x 10⁶ bits per second. The high resolution monitors we examined were black and white monitors with a pixel …
-
High-performance organic photodiodes and their applications
Low-cost high-performance photodetectors are in need to enable ubiquitous intelligence and computing systems. Organic photodiodes (OPDs) can be fabricated into devices with a highly conformal form factor using coating and printing techniques that are scalable. Hence, they enable large-area devices …
-
From Lab Testing to Science: Applying SAPHIRA HgCdTe L-APD Detectors to Adaptive Optics
Due to their high frame rates, high sensitivity, low noise, and low dark current, SAPHIRA detectors provide new capabilities for astronomical observations. The SAPHIRA detector is a 320256@24 m pixel HgCdTe linear avalanche photodiode array manufactured by Leonardo. It is sensitive to 0:82:5 m …
-
Wafer-scale High-bandwidth Germanium on Silicon Photodetectors for Communications Applications
… for integrated optics, due to the intrinsic low-cost of silicon manufacturing. An especially attractive application is that of telecommunications. One key component for telecommunications applications is high-performance photodetectors, which convert an optical signal to an electrical signal. …
-
High Performance, Low Cost Lateral Metal-Semiconductor-Metal Photodetector for Large Area Indirect X-Ray Imaging
… Therefore for general radiography applications low cost systems are needed, especially in hospitals and healthcare systems of the developing countries. The focus of this research is the fabrication and characterization of a low cost amorphous silicon metal-semiconductor-metal photodetector as a …
Page 1 of 3