Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 166 for “"Low Power Applications"”.

  1. Millimeter-Wave Radar for Low-Power Applications

    … it is nowadays also applied for many civil applications. Improvements in circuit technology make integrated radar sensors possible, allowing a significant reduction of the production cost. Integrated radio circuits in the low gigahertz range are widely available, not least driven by wireless …

    lund Repository record for Millimeter-Wave Radar for Low-Power Applications (opens in a new tab) Download PDF for Millimeter-Wave Radar for Low-Power Applications (opens in a new tab)

  2. STUDY OF ADAPTIVE COMPRESSIVE SENSING FOR LOW POWER APPLICATIONS

    Compressive sensing (CS) technique potentially allows sparse signals to be sampled at rates lower than their Nyquist Rates, making it appealing for implementation of low-power sensors. This dissertation investigates techniques to further improve CS efficiency by adaptively adjusting the sampling …

    siu-theses Repository record for STUDY OF ADAPTIVE COMPRESSIVE SENSING FOR LOW POWER APPLICATIONS (opens in a new tab)

  3. Nanowire Transistors and RF Circuits for Low-Power Applications

    … increasing demand of higher bandwidth and lower power consumption for transmitting data. The work aims at demonstrating how new types of structures, at the nanoscale, combined with what is referred to as exotic materials, can help benefit in electronics by lowering the consumed power, …

    lund Repository record for Nanowire Transistors and RF Circuits for Low-Power Applications (opens in a new tab) Download PDF for Nanowire Transistors and RF Circuits for Low-Power Applications (opens in a new tab)

  4. A CMOS LDO Voltage Regulator for Low Power Applications

    … the design, simulation, layout, and testing of a low dropout linear voltage regulator (LDO) in a 180 nm CMOS process. The LDO is intended for use in low-power, battery-operated applications, and it has an adjustable output for a variety of different implementations. It can supply up to 100 mA of …

    arkansas Repository record for A CMOS LDO Voltage Regulator for Low Power Applications (opens in a new tab)

  5. Bi-directional DC-DC converter for low power applications

    Applications that require exchange of power from the source to the load and vice-versa have conventionally been implemented with two uni-directional converters; each processing the power in one direction. With growing emphasis on compact, smaller and efficient power systems there is increasing …

    concordia Download PDF for Bi-directional DC-DC converter for low power applications (opens in a new tab)

  6. HAFNIUM-OXIDE-BASED FERROELECTRIC MEMORY DEVICES FOR LOW-POWER APPLICATIONS

    The ever-growing demand for computing power, coupled with the surging data volume and data-centric computing, fuels the pursuit of a revolutionary memory device to mitigate the impact of the “memory wall” or potentially circumvent it by enabling the compute-in-memory (CiM) paradigm. As promising …

    nus Repository record for HAFNIUM-OXIDE-BASED FERROELECTRIC MEMORY DEVICES FOR LOW-POWER APPLICATIONS (opens in a new tab) Download file for HAFNIUM-OXIDE-BASED FERROELECTRIC MEMORY DEVICES FOR LOW-POWER APPLICATIONS (opens in a new tab)

  7. Efficacy of Multi-Threshold NULL Convention Logic in Low-Power Applications

    … and drawbacks especially with respect to power usage. The power tradeoff between MTNCL and synchronous designs depends on many different factors including design type, circuit size, process node, and pipeline granularity. Each of these design dimensions influences the active power and the …

    arkansas Repository record for Efficacy of Multi-Threshold NULL Convention Logic in Low-Power Applications (opens in a new tab)

  8. Temperature compensated subthreshold CMOS voltage references for ultra low power applications

    … subthreshold voltage references for ultra-low power and ultra-low voltage applications. The core of the proposed circuits is the self-cascode MOSFET (SCM) since it can operate at very low current levels. To reduce the power consumption, self-biasing and zero-VT leakage biasing schemes are …

    brazil-ufrgs Repository record for Temperature compensated subthreshold CMOS voltage references for ultra low power applications (opens in a new tab)

  9. On the design of switched-capacitor converters for low power applications

    Power conversion is crucial to most electronic systems due to different voltage levels requirement within the system. Switched-capacitor converters are a subset of switching modeconverters, where the energy is transferred from the input to the output using only capacitors and switches. SC …

    msu Repository record for On the design of switched-capacitor converters for low power applications (opens in a new tab)

  10. Analytical models of single and double gate JFETs for low power applications

    I propose compact models of single-gate (SG) and double-gate (DG) JFETs predicting the current-voltage characteristics for both long and short channel devices. In order to make the current equation continuous through all operating conditions from subthreshold to well-above threshold, without …

    texas Repository record for Analytical models of single and double gate JFETs for low power applications (opens in a new tab)

  11. Optimized granularity analysis of maximum power point trackers in low power applications

    … energy consumption through the growing use of low-power electric devices in the U.S. military makes augmentation with solar energy an attractive solution due to its versatility, sustainability, and relatively low cost. In variable environmental conditions, solar panels generate unpredictable …

    nps Repository record for Optimized granularity analysis of maximum power point trackers in low power applications (opens in a new tab)

  12. A Constant ON-Time 3-Level Buck Converter for Low Power Applications

    … mostly in sleep mode, which is light load for power supplies. Typical buck converter applications have low efficiency under the light load condition, primarily from their power stage and control being optimized for heavy load. The battery life of a smart camera can be extended through …

    vt Repository record for A Constant ON-Time 3-Level Buck Converter for Low Power Applications (opens in a new tab)

  13. Integrated Circuit and System Design for Cognitive Radio and Ultra-Low Power Applications

    The ubiquitous presence of wireless and battery-powered devices is an inseparable and invincible feature of our modern life. Meanwhile, the spectrum aggregation, and limited battery capacity of handheld devices challenge the exploding demand and growth of such radio systems. In this work, we try to …

    tamu Repository record for Integrated Circuit and System Design for Cognitive Radio and Ultra-Low Power Applications (opens in a new tab)

  14. A Two-Phase Buck Converter with Optimum Phase Selection for Low Power Applications

    Power consumption of smart cameras varies significantly between sleep mode and active mode, and a smart camera operates in sleep mode for 80 — 90% of time for typical use. To prolong the battery life of smart cameras, it is essential to increase the power converter efficiency for light load, while …

    vt Repository record for A Two-Phase Buck Converter with Optimum Phase Selection for Low Power Applications (opens in a new tab)

  15. Recursive receiver down-converters with multiband feedback and gain-reuse for low-power applications

    Power minimization in wireless transceivers has become increasingly critical in recent years with the emergence of standards for short-distance applications in the 900 MHz and 2.4 GHz industrial, scientific and medical (ISM) radio bands. The demand for long battery life and better portability in …

    texas Repository record for Recursive receiver down-converters with multiband feedback and gain-reuse for low-power applications (opens in a new tab)

  16. 1.1V Supply Vth based CMOS voltage reference and analog multiplier for low power applications

    The development of low power integrated system is expected to lead to the expansion of next-generation power-efficient applications. A voltage-reference is widely used in integrated circuits to generate an on-chip reference voltage. The generated voltage-reference is used for building blocks like …

    texas Repository record for 1.1V Supply Vth based CMOS voltage reference and analog multiplier for low power applications (opens in a new tab)

  17. Statistical Analysis and Predictive Modelling of Random Telegraph Noise in Nanometre Devices for Low Power Applications

    … normal in electronics, one of the core issues is low power consumption. The direct solution is to reduce the operation voltage towards the threshold voltage of Metal Oxide Silicon Field Effect Transistors (MOSFETs); however, this reduces noise toleration. The focus of this research is Random …

    liverpool-jm Repository record for Statistical Analysis and Predictive Modelling of Random Telegraph Noise in Nanometre Devices for Low Power Applications (opens in a new tab) Download PDF for Statistical Analysis and Predictive Modelling of Random Telegraph Noise in Nanometre Devices for Low Power Applications (opens in a new tab)

Page 1 of 9