Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 21 for “"Low ripple"”.

  1. A low ripple bi-directional battery charger/discharger using coupled inductor

    … about a spacecraft power conversion system: low ripple current flowing through both battery and bus, and bi-directional power flow to and from the battery. This thesis introduces a novel low ripple current bi-directional battery charge/discharge converter using coupled-inductor. …

    vt Repository record for A low ripple bi-directional battery charger/discharger using coupled inductor (opens in a new tab)

  2. Analysis and design of a low-ripple coupled-inductor boost topology

    … the development, analysis, and design of a new low-ripple coupled-inductor boost topology. This topology is proposed for applications in which the conventional boost requires an input filter and two-stage output filter. One "zero-ripple" coupled magnetic provides both energy storage and …

    vt Repository record for Analysis and design of a low-ripple coupled-inductor boost topology (opens in a new tab)

  3. Low ripple and noise DC/DC converter with quasi-resonant switching and integrated magnetics.

    A low output ripple and noise converter is achieved by employing a zero-voltage switch (ZVS), an integrated magnetics structure which couples a transformer and several coupled inductors in one core, and several auxiliary packaging designs. In the steady-state analysis, the operation of ZVS …

    arizona-thes Repository record for Low ripple and noise DC/DC converter with quasi-resonant switching and integrated magnetics. (opens in a new tab)

  4. Construction of a low-ripple inverter with accurate phase control for calibration of measurement equipment

    … performance in simulations with dc offset and low-order harmonic in the input signal. This is due to its low-pass filters. While the standard deviation in the phase error of the IP-PLL was 50 rad it was 350 rad for the E-PLL and 570 rad for the KF-PLL with a dc offset at 1.8 % of the …

    chalmers Repository record for Construction of a low-ripple inverter with accurate phase control for calibration of measurement equipment (opens in a new tab)

  5. Applications of active compensators to magnet power supplies

    … are intended for magnet load applications where low-ripple and fast response load regulation are required.

    concordia Download PDF for Applications of active compensators to magnet power supplies (opens in a new tab)

  6. High-Performance Control of Switched Reluctance Motors

    A general high bandwidth, low ripple, instantaneous torque control strategy with a variable field-angle for extended constant-power speed range is presented. The strategy is based on the SR motor's electromagnetic characteristics measured at the motor terminals and is the nearest functional …

    glasgow Download PDF for High-Performance Control of Switched Reluctance Motors (opens in a new tab)

  7. Soft-switched three-phase PV microinverter

    … that the proposed converter topology results in low conduction and switching losses for all the active devices over the entire range of operation. A novel soft-switching full-bridge DC-AC inverter is also proposed that provides ultra-low ripple output current. In the proposed inverter, the output …

    queens Repository record for Soft-switched three-phase PV microinverter (opens in a new tab)

  8. High Voltage Resonant Self-Tracking Current-Fed Converter

    … systems require fast voltage rise times and low ripple to yield a clear image. The proposed converter implements high-frequency resonance among discrete components and transformer parasitics to achieve high voltage gain, and the self-tracking nature ensures operation at maximum gain while …

    calpoly Repository record for High Voltage Resonant Self-Tracking Current-Fed Converter (opens in a new tab)

  9. FPGA-Based Simulation and Implementation of Induction Motor Torque Control Systems Based on Direct Torque Control (DTC)

    … 800 kHz. This is a breakthrough knowing that a low ripple DTC is highly dependent on high sampling frequencies. Finally, a configurable torque/speed control system is designed and implemented on dSPACE.

    ndsu Repository record for FPGA-Based Simulation and Implementation of Induction Motor Torque Control Systems Based on Direct Torque Control (DTC) (opens in a new tab)

  10. The Modified-Multiphase Boost Converter: Combined Inductors and Capacitors Topology

    … been proven to drastically reduce input current ripple by about 40% in a single-phase implementation. By placing two modified boost converters in parallel with interleaving main switches (multiphase), the input inductors and modified capacitors of the modified topology can be reduced to just one …

    calpoly Repository record for The Modified-Multiphase Boost Converter: Combined Inductors and Capacitors Topology (opens in a new tab)

  11. Fast response controller for a stepping inductance based voltage regulator module

    … between different operating states and low ripple voltage both under normal and inductor current recovery conditions. The averaged model of the converter is verified by experimental results. Based on this model, a dual-gain voltage controller is proposed which exploits the higher …

    nus Repository record for Fast response controller for a stepping inductance based voltage regulator module (opens in a new tab) Download file for Fast response controller for a stepping inductance based voltage regulator module (opens in a new tab)

  12. Single-Stage Interleaved Photovoltaic (PV) Step-up Resonant Converter Modules with Integrated PV MPPT for Magnetron Application

    … to satisfy the magnetron load's high-voltage, low-ripple, and high-efficiency demands. In this thesis, a high-gain single-stage DC/DC converter with soft-switching capability is proposed for PV-driven magnetron applications. This thesis is divided into two main sections. The first part …

    york Repository record for Single-Stage Interleaved Photovoltaic (PV) Step-up Resonant Converter Modules with Integrated PV MPPT for Magnetron Application (opens in a new tab)

  13. COMPARATIVE ANALYSIS OF CONTROL STRATEGIES FOR THREE-PHASE BIDIRECTIONAL INTERLEAVED BUCK CONVERTERS IN ELECTRIC VEHICLE APPLICATIONS

    … for applications requiring high efficiency, low ripple, and flexible power flow, such as electric vehicles and renewable energy systems. Interleaving multiple converter phases allows improved current ripple cancellation, thermal distribution, and faster dynamic response. Bidirectional …

    mcmaster Repository record for COMPARATIVE ANALYSIS OF CONTROL STRATEGIES FOR THREE-PHASE BIDIRECTIONAL INTERLEAVED BUCK CONVERTERS IN ELECTRIC VEHICLE APPLICATIONS (opens in a new tab)

  14. Design and development of high step-up single-switch DC/DC converters for micro-inverter applications

    … high-step-up DC–DC converters to interface low-voltage inputs with high-voltage DC buses. However, traditional converters such as boost and buck-boost require extreme duty cycles to achieve high voltage gains. For instance, achieving a gain ratio of 8 to 10 requires a duty cycle of 0.87 to …

    qu-belfast Repository record for Design and development of high step-up single-switch DC/DC converters for micro-inverter applications (opens in a new tab) Embargoed until 2028-07-31

  15. Advanced topologies of high step-up DC-DC converters for renewable energy applications

    … of high step-up DC-DC converters to connect low-voltage renewable energy (RE) sources, such as photovoltaic (PV) panels and fuel cells (FCs), into a high-voltage DC bus in renewable energy applications. The proposed converters are based on the combinations of various voltage-boosting (VB) …

    must-thes Repository record for Advanced topologies of high step-up DC-DC converters for renewable energy applications (opens in a new tab)

  16. Integrated photonic circuits on SOI and SiNOI platforms for high-sensitivity sensing and reconfigurable multi-passband filtering

    … while routing most optical power through low-loss analyte sections. This architecture supports stable C-band operation and provides a route to array-scalable sensors intended for monitoring biomolecular binding and concentration changes in microfluidic lab-on-chip diagnostics. For …

    glasgow Repository record for Integrated photonic circuits on SOI and SiNOI platforms for high-sensitivity sensing and reconfigurable multi-passband filtering (opens in a new tab) Download PDF for Integrated photonic circuits on SOI and SiNOI platforms for high-sensitivity sensing and reconfigurable multi-passband filtering (opens in a new tab)

  17. New leading/trailing edge modulation strategies for two-stage AC/DC PFC adapters to reduce DC-link capacitor ripple current

    … Factor Correction (PFC) pre-regulation stage followed by an isolated DC/DC converter stage. Low power AC/DC adapters require a small size to be competitive. Among their components, the bulk DC-link capacitor is one of the largest because it should keep the output voltage with low ripple. Also, …

    tamu Repository record for New leading/trailing edge modulation strategies for two-stage AC/DC PFC adapters to reduce DC-link capacitor ripple current (opens in a new tab)

  18. A Charge Pump Architecture with High Power-Efficiency and Low Output Ripple Noise in 0.5 μm CMOS Process Technology

    … which generates higher positive voltage or lower voltage or negative voltage from the applied reference voltage. A charge pump circuit uses switches for charge transfer action and capacitors for charge storage. The thesis presents a high power-efficiency charge pump architecture with low …

    rit Repository record for A Charge Pump Architecture with High Power-Efficiency and Low Output Ripple Noise in 0.5 μm CMOS Process Technology (opens in a new tab)

  19. Development of Double-Sided Interior Permanent Magnet Flat Linear Brushless Motor and Its Control Using Linear Optical Potentiometer

    … using the slot-phase shift between the upper and lower stators. A base model prototype with the detent force of only 1.5% of the maximum thrust force is developed using the electrical solid steel. Analytic modeling techniques of the base model prototype with slot-phase shift and alternate teeth …

    tamu Repository record for Development of Double-Sided Interior Permanent Magnet Flat Linear Brushless Motor and Its Control Using Linear Optical Potentiometer (opens in a new tab)

  20. Equivalent Linear Model Based Torque Control and Performance Improvement For Switched Reluctance Motor (SRM) Drives

    … interest in industrial applications due to their low manufacturing cost, simple and robust structure, excellent fault-tolerant capability, and reliable operation in high-temperature operating environments. However, the inherent pulsative torque and radial force lead to the well-known torque …

    mcmaster Repository record for Equivalent Linear Model Based Torque Control and Performance Improvement For Switched Reluctance Motor (SRM) Drives (opens in a new tab)

Page 1 of 2