Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 22 for “"Low-Rise Structures"”.
-
Wavelet Analysis of Extreme Wind Loads on Low-Rise Structures
… with the objective of reducing wind damage to structures. Wind tunnel simulations of wind loads have been the major source of building codes. However, a simple comparison of pressure coefficients measured in wind tunnel simulations with full-scale measurements show that the simulations, in …
-
Pressure coefficients on roofs of low-rise structures in open terrain
… validated the reliability of the tunnel for low-rise structutres, measurement of external pressures on the roof of an isolated SIA model hangar is conducted. It is observed that the mean pressure coefficients at the corners of the roof are higher than the value given in the design code.
-
Fluid-structure interaction of a tornado-like vortex with low-rise structures
… vortex and scaled-models of external structures. Based on the Ward-type tornado simulator, the TTU simulator uses sixteen slotted jets to impart angular momentum to the incoming flow. Use of the slotted jets allowed access to the confluence and convergence zones so that scaled models …
-
Analysis, Simulation and Control of Peak Pressure Loads on Low-Rise Structures
… the characteristics of extreme loads on low-rise structures through analysis of full-scale and numerical data. We also use numerical simulations to evaluate different approaches to control the separated flow over a surface-mounted prism with the objective of reducing extreme pressure …
-
Comparison of Paul and Morlet Wavelets for Measuring the Characteristic Scale of Peak Pressure Events on Low-Rise Structures
A methodology to measure a characteristic time scale (duration) of peaks in pressure and velocity data is presented. This methodology is based on the use of the Morlet and Paul wavelets. Detailed descriptions of these wavelets and their implementation procedures are given. The results show that …
-
Use of the Discrete Vortex Method to Calculate Wind Loads over a Surface-Mounted Prism and a Bridge Cross-Section with Flaps
… Vortex Method (DVM) as a tool to determine the flow field and associated wind loads over structures. Two structures are considered: the first is a surface-mounted prism and is used to simulate wind loads over low-rise structures. The second is a bridge section with attached flaps that can be …
-
Development of Analysis Tools for the Facilitation of Increased Structural Steel Reuse
… in many cases, if associated costs and risks are lowered, and if externalities are considered. The costs and risks typically associated with steel reuse arise through the unknown capacity of reused components and increased deconstruction activities that may be required to extract the components. …
-
Assessment of Analytical Procedures for Designing Metal Buildings for Wind Drift Serviceability
While designing metal buildings for wind drift, for simplicity of analysis and design, connection at base of column is considered as pinned which provides no rotational restraint. The actual behavior of the connection however, is partially rigid, that provides some rotational stiffness even in case …
-
Design Decisions for a Buildable Prefabricated Modular High-Rise Structure with Customized Geometry: A Case for Honolulu, HI
The current status of high-rise buildings is dependent on generating the maximum profit for developers. This is limiting design freedom in high-rise structures and creating cities of extruded boxes as a result. Therefore, high-rise buildings are conforming to economic feasibility which excludes …
-
Instrumentation, experiments, and procedures at the WERFL field site
… to advance the understanding of uind effects on low rise structures. To this end, researchers at Texas Tech designed a unique experimental facility that combines the best features of previous field experiments with advanced instrumentation and computer technology. The Wind Engineering Research …
-
Low-Rise, High-Density Housing in Hawaii: An Affordable Housing Alternative for the Families of Hawaii
… homes. The 3-acre development is comprised of shared spaces and individual lots, similar to the typical R-5 zoning, that house multi-family dwellings. The new dwelling typology consists of separate low-rise structures arranged programmatically. The bedrooms and bathrooms, which …
-
Environmental design directed at decreasing the wind damage experienced from hurricanes in single-family residential communities
… of initiation points of failure in low-rise structures experienced during tomadic winds. These initiation points of failure occur at points experiencing high wind pressures which a direct resuh of poor aerodynamic configurations found in most conventional buildings (Minor and Mehta …
-
Direct measurement of wind loads on a low-rise test building
Wind loads on low-rise structures are studied in the field primarily so that the results obtained can be used to provide a base-line data set and to assist in wind tunnel studies. The objective of this work is to develop a means of directly measuring total wind loads in the field on a low-rise test …
-
Experimental and Numerical Investigations of the Effects of Incident Turbulence on the Flow Over a Surface-Mounted Prism
… of the effects of free stream turbulence on the flow field over a surface-mounted prism is examined through experimental and numerical investigations. In the experimental studies, particle image velocimetry measurements are conducted in the ESM water tunnel at Reynolds number of $9,600$ and under …
-
Development of a large-scale simulator
… uses 64 airfoil columns to direct the airflow and eight suction fans on the top of the simulator to create the necessary updraft. It has the capability of producing vortices with inner core diameters of around three feet. A CNC hot wire foam cutter was used to fabricate the airfoil shapes …
-
Effects of a Flexible Foundation on the Response of a Timber Shear Wall
… provide resistance to lateral loading for many low-rise structures in North America. Research performed on shear walls has assumed that a wall is supported by a relatively stiff foundation, such as a concrete block wall, along the entire length of the wall. However, walls are sometimes supported …
-
Analysis of surface pressure and velocity fluctuations in the flow over surface-mounted prisms
… Reynolds number associated with wind loads on structures is of the order of 10^7. This is further complicated by the high levels of turbulence fluctuations associated with strong winds. On the other hand, numerical and wind tunnel simulations are usually carried out at smaller values of Re. …
Page 1 of 2