Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 44 for “"Low-temperature operation"”.
-
Proton Exchange Membrane Fuel Cells for Automotive Applications: Low-Temperature Operation and Deployment in Material Handling Equipment
… stack exhaust manifolds where excess reactant flows from individual cells are combined and leave the stack. For practical applications, especially in the anode flow field, there is a small driving force to expel liquid water in this region. Under severe operating conditions such as freezing …
-
Charge transfer inefficiency of buried-channel charged coupled device registers for low temperature operation of PtSi infrared image sensors
… that influence charge transfer efficiency at low temperatures ranging from 38 to 80K. These factors included frequency of operation, background signal, gate voltage, signal level, gate length, and temperature. It was found that increased gate voltage and decreased gate length are most …
-
The design, testing and evaluation of a methanol fueled burner/air heater for improved low temperature operation of methanol fueled vehicles
… starting and poor warm-up driveability. These low temperature problems are more apparent using methanol than gasoline due to methanol's higher latent heat of vaporization, lower stoichiometric air-fuel ratio and lower vapor pressure.</p> <p>Solutions to these problems have been proposed and …
-
The Modification and Use of an Electron Paramagnetic Resonance Spectrometer for Data Collection at Liquid Nitrogen Temperature
… of an EPR spectrometer for acquisition of low temperature data. The modification involved adaptation of the system for use with a cylindrical cavity specifically designed for low temperature operation. This modification increased the capability of the present system for data collection at …
-
Geometry Aware Cold Spray Additive Manufacturing Robotic Deposition for Multilayer Walls Accuracy and Material Integrity
… manufacturing (AM) process, recognized for its low-temperature operation, high deposition rates, and the avoidance of melting and resolidification, thereby minimizing thermal impact during processing. However, achieving complex 3D near-net shapes with acceptable accuracy remains challenging. …
-
Enhancing low-temperature electrochemical performance of lithium secondary batteries
… explorations and space missions, requires stable operation under low-temperature conditions. However, the low-temperature performance of conventional Li-ion batteries (LIBs) employing graphite anode is limited by the diffusion-controlled charge storage mechanism, which can cause the sluggish …
-
Formaldehyde-MEA Triazine Based Hydrogen Sulfide Scavenger Behavior Study and Applications in the Oil and Gas Industry
… package, other additives, plant synthesis, low temperature operation, spent solids treatment, sour liquid sweetening and capacity monitoring are all important considerations for successful H2S sweetening applications in the western Canadian oil and gas industry.
-
Modeling and Control System Design of a Cascade Vapor Compression System
… at the evaporator outlets, and an intermediate temperature set to the geometric mean of the low-stage evaporator and high-stage condenser to enhance system efficiency. PI controllers are incorporated to regu late performance under various operating conditions. A MATLAB Simscape model was …
-
Solid oxide fuel cell cathode infiltrate particle size control and oxygen surface exchange resistance determination
… much attention in the literature due to their low polarization resistance (RP) at intermediate (500-700°C) operating temperatures. Small infiltrated MIEC oxide nano-particle size and low intrinsic MIEC oxygen surface exchange resistance (Rs) have been two critical factors allowing these …
-
Intramolecular force mapping at room temperature using Non-Contact Atomic Force Microscopy
Scanning Probe Microscopy (SPM) methods allow for investigations on the molecular and atomistic scale in real space. While Scanning Tunneling Microscopy (STM) images the electronic structure of a molecular sample, its chemical structure can be resolved, and precise conformation can be determined, …
-
The quantitative characterization of middle distillate fuels for reduced smoke emission and improved low temperature operability
… and of the solids separating from these fuels at temperatures below their cloud points by consideration of fuel physical inspections. The physical inspections consist of API gravity, aniline point, cloud point, and distillation curves for ten fuels from major United States and European refineries. …
-
Cold-start effects on performance and efficiency for vehicle fuel cell systems
… and quantify the impact and effects of low temperature operation has on the performance and efficiency of vehicle fuel cell systems through modeling. More specifically, this work addresses issues of the initial thermal transient known to the automotive community as "cold-start" effects. …
-
LATTICE MODIFICATIONS ON SOLID STATE ELECTROLYTES FOR THE OPTIMIZATION OF ION TRANSPORT
… for sufficient performance at intermediate and low temperature operation. Therefore, novel bismuth oxide compositions were developed to achieve higher conductivity. The conductivity of Bi2O3 was improved by reducing the total dopant concentration required to stabilize the highly conductive cubic …
-
Destabilization and Characterization of LiBH<sub>4</sub>/MgH<sub>2</sub> Complex Hydride for Hydrogen Storage
… for on-board hydrogen storage vehicles due to low temperature operation, efficiency and low environmental impact. However, the realization of PEMFC vehicles must overcome the portable hydrogen storage barrier. DOE and FreedomCAR technical hydrogen storage targets for the case of solid state …
-
Catalytic coatings for vanadium-based hydrogen membranes
… mechanism were investigated for membrane operation at temperatures > 400 °C. Membrane performance of the various group V metals (vanadium, niobium, and tantalum) was studied with the application of Mo2C. Vanadium provided the best hydrogen permeability and mechanical stability, and …
-
A Micromachined Ultrasonic Droplet Generator: Design, Fabrication, Visualization, and Modeling
… jet ejection. This ejection technique exhibits low-power operation while addressing the key challenges associated with other atomization technologies including production of sub-5 um diameter droplets, low-temperature operation, the capacity to scale throughput up or down, and simple, low-cost …
-
Studies on a Polarized Proton Target for Reactions with Radioactive Ion Beams
… to operate in reactions with heavy ions at low and intermediate energies. Protons in a plastic foil are polarized using the dynamic nuclear polarization method, which requires low temperature operation (~200 mK) and intense magnetic fields (2.5 T). The foils can be prepared using the spin …
-
Location of guest species in zeolites by solid-state NMR
… Apparatus which permitted the extended low temperature operation was developed. Powder X-ray diffraction experiments confirmed the sorbate- and temperature-induced phase changes observed for this system. Using a specially designed piece of equipment, a single crystal of ZSM-5 was loaded …
-
Performance and Enhancement of Solid Oxide Fuel Cell Electrodes Via Surface Modification
… of NOx. Additionally, the design of the device allows for a facile integration of carbon capture because the exhaust from the anode and cathode are already separated, allowing for a separated CO2 stream for carbon capture. Technical limitations have prohibited the commercial deployment of SOFCs at …
Page 1 of 3