Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 31 for “"Low-temperature sintering"”.

  1. The low-temperature sintering behavior of (La,Ca)CrO₃

    … purpose of this study was to develop methods of sintering this material in air at temperatures below 1500°C. The results are compiled into three papers. The first paper discusses the formation of pure and Ca doped lanthanum chromate (LaCrO4). This compound transforms to lanthanum chromite …

    must-thes Repository record for The low-temperature sintering behavior of (La,Ca)CrO₃ (opens in a new tab)

  2. Low-Temperature Sintering of Nanoscale Silver Paste for Semiconductor Device Interconnection

    … relationships of low-temperature sintering of nanoscale silver pastes. The nanoscale silver pastes have been formulated by adding organic components (dispersant, binder and thinner) into nano-silver particles. The selected organic components have the nano-particle …

    vt Repository record for Low-Temperature Sintering of Nanoscale Silver Paste for Semiconductor Device Interconnection (opens in a new tab)

  3. Low temperature sintering of antiferroelectric ceramics with ZnO and CuO as additive

    … have been studied for their potential as high temperature high energy density capacitors. One limiting factor of AFE’s energy density and efficiency is the defects such as voids and microcracks. It is known that sintering temperature has a significant effect on the grain size, and smaller grain …

    iastate Repository record for Low temperature sintering of antiferroelectric ceramics with ZnO and CuO as additive (opens in a new tab)

  4. Processing and Properties of Die-attachment on Copper Surface by Low-temperature Sintering of Nanosilver Paste

    … alternative to solder for die-attachment at sintering temperature below 300 °C without applying any pressure. Typically, the substrate, such as direct bond copper (DBC) substrates, has surface metallization such as silver or gold to protect the copper surface from oxidation during the …

    vt Repository record for Processing and Properties of Die-attachment on Copper Surface by Low-temperature Sintering of Nanosilver Paste (opens in a new tab)

  5. Low-temperature sintering and fabrication research of ceramics and numerical simulation on elastic, pressure drop and heat transfer properties of open cell foams

    Vanadium pentoxide (V2O5) was chosen as a sintering aid to lower the sintering temperature of the ZnO-TiO2 system. The effect of V2O5 on the sintering behavior of ZnO-TiO2 ceramics and cermets was studied as a function of additive percentage and sintering temperature. Then porous alumina ceramics …

    missouri Repository record for Low-temperature sintering and fabrication research of ceramics and numerical simulation on elastic, pressure drop and heat transfer properties of open cell foams (opens in a new tab)

  6. DETERMINING HEAT TREATMENT METHODS FOR ADDITIVE MANUFACTURED SILICON NITRIDE-BNNT COMPOSITES

    … brittleness and challenges associated with high-temperature sintering limit their wider adoption. This thesis investigates the potential of incorporating boron nitride nanotubes (BNNTs) into Si₃N₄ matrices via additive manufacturing and molten salt synthesis (MSS) to enhance their properties and …

    nps Repository record for DETERMINING HEAT TREATMENT METHODS FOR ADDITIVE MANUFACTURED SILICON NITRIDE-BNNT COMPOSITES (opens in a new tab)

  7. On The Potential Of Lignin As A Sintering Aid And Binder For Designing Porous Foams

    … composite systems, lignin is observed to be a low temperature sintering aid, or pore former, while acting as a strong mechanical binder. Cu or DDGS additions within a lignin matrix resulted in strength enhancement as compared to fabricated lignin foams while achieving highly porous composite …

    nodak Repository record for On The Potential Of Lignin As A Sintering Aid And Binder For Designing Porous Foams (opens in a new tab)

  8. LOW TEMPERATURE SILVER PASTE

    … despite the advantages, the adoption of silver sintering technology has been limited, primarily due to the harsh conditions required—namely, high temperatures and applied pressures—that can hinder its use in sensitive electronic devices. This thesis explores the development of a pressureless …

    nus Repository record for LOW TEMPERATURE SILVER PASTE (opens in a new tab) Download file for LOW TEMPERATURE SILVER PASTE (opens in a new tab)

  9. Novel conductive adhesives for electronic packaging applications: a way towards economical, highly conductive, low temperature and flexible interconnects

    … methodologies to reduce contact resistance: low temperature sintering, fast sintering and in-situ reduction. Furthermore, two approaches, surface modification and in-situ protection, were developed to prevent oxidation and corrosion of silver-coated copper flakes to produce low cost ICAs. The …

    gatech Repository record for Novel conductive adhesives for electronic packaging applications: a way towards economical, highly conductive, low temperature and flexible interconnects (opens in a new tab)

  10. Synthesis and characterization of bulk nanostructured copper for nano wafer level packaging

    … range were uniaxially die compacted at room temperature at pressures ranging from 0.25GPa to 1.00GPa. The selection of pressure range was made based on the ability of Si wafer to withstand the pressure without experiencing mechanical damage and was based on literature search. The cold …

    nus Repository record for Synthesis and characterization of bulk nanostructured copper for nano wafer level packaging (opens in a new tab) Download file for Synthesis and characterization of bulk nanostructured copper for nano wafer level packaging (opens in a new tab)

  11. CHARACTERIZATION OF THE SIZE-QUANTIZED ELECTRONIC AND OPTICAL PROPERTIES OF CdSe NANOCRYSTALS FOR APPLICATIONS IN PHOTOCATALYSIS, SOLAR CELLS AND DIFFRACTION GRATINGS

    … by a facile layer-by-layer procedure. A low-temperature sintering strategy was utilized to electronically couple the nanocrystal thin films, which maintained the individual electronic properties of the nanocrystals. The electrical characteristics of these solar cells displayed predictable …

    arizona-thes Repository record for CHARACTERIZATION OF THE SIZE-QUANTIZED ELECTRONIC AND OPTICAL PROPERTIES OF CdSe NANOCRYSTALS FOR APPLICATIONS IN PHOTOCATALYSIS, SOLAR CELLS AND DIFFRACTION GRATINGS (opens in a new tab)

  12. Planar Packaging and Electrical Characterization of High Temperature SiC Power Electronic Devices

    This thesis examines the packaging of high-temperature SiC power electronic devices. Current-voltage measurements were conducted on as-received and packaged SiC power devices. The planar structure was introduced and developed as a substitution for traditional wire-bonding vertical structure. The …

    vt Repository record for Planar Packaging and Electrical Characterization of High Temperature SiC Power Electronic Devices (opens in a new tab)

  13. Synthesis of biobased silver nano-inks for 3D printed electronics

    … significant promise for use in microgravity, allowing for the on-demand fabrication of devices in outer-space missions. However, the selection of suitable inks remains a major challenge due to limited availability of formulations tailored for EHD processes. To address this, a new silver nano-ink …

    iastate Repository record for Synthesis of biobased silver nano-inks for 3D printed electronics (opens in a new tab)

  14. Investigating Damp-Heat Degradation and Mitigation Strategies for Industrial N-Type Silicon Solar Cells

    … cells, transparent conductive oxide (TCO) and low-temperature sintering Ag contacts contribute to performance degradation. To address these issues, a new Al-free Ag paste was applied to TOPCon cells with laser-assisted firing, and an ultra-thin aluminium oxide (AlOx) barrier layer was applied …

    unsw Repository record for Investigating Damp-Heat Degradation and Mitigation Strategies for Industrial N-Type Silicon Solar Cells (opens in a new tab) Embargoed

  15. Sintering behavior of Ag-Sn alloys prepared via cryogenic high-energy ball milling

    … there is a need to develop high temperature die-attach materials that are mechanically stable at operating temperatures of 300◦C and provide excellent thermal conductivity between die and substrate materials. There are no obvious choices for all applications, however, low …

    uiuc Repository record for Sintering behavior of Ag-Sn alloys prepared via cryogenic high-energy ball milling (opens in a new tab)

  16. A diffusion-viscous analysis and experimental verification of the drying behavior in nanosilver-enabled low-temperature joining technique

    The low-temperature joining technique (LTJT) by silver sintering is being implemented by major manufacturers of power electronics devices and modules for bonding power semiconductor chips. A common die-attach material used with LTJT is a silver paste consisting of silver powder (micron- or …

    vt Repository record for A diffusion-viscous analysis and experimental verification of the drying behavior in nanosilver-enabled low-temperature joining technique (opens in a new tab)

  17. MANUFACTURABILITY AND RELIABILITY OF ADDITIVELY MANUFACTURED PLANAR TRANSFORMER WINDINGS USING SILVER-BASED PASTE

    … as the impact of electrical resistivity on the sintering process for the syringe-printed silver-based windings; and (2) the evaluation of the reliability of the syringe-printed silver-based windings, which will involve assessing adhesion performance between the metal/ceramic interface, …

    maryland Repository record for MANUFACTURABILITY AND RELIABILITY OF ADDITIVELY MANUFACTURED PLANAR TRANSFORMER WINDINGS USING SILVER-BASED PASTE (opens in a new tab)

  18. Inkjet printing and IR sintering optimization for flexible electronic applications

    … Combining common printing techniques with low temperature sintering processes was the key to develop and optimize the production of such simple devices on flexible substrates, mainly paper. The use of paper as a flexible substrate has highly attractive characteristics, being its low cost, …

    aalto Repository record for Inkjet printing and IR sintering optimization for flexible electronic applications (opens in a new tab)

Page 1 of 2