Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 16 of 16 for “"LuGre Friction model"”.
-
BALL SCREW LINEAR ACTUATOR CONTROL AND IMPLEMENTATION BY APPLYING LUGRE FRICTION MODEL
… reasons. One of the major problems is nonlinear friction, which makes it difficult to estimate using the simple friction model. In this thesis, a LuGre friction model is introduced and applied to the ball screw system. The sponsor’s ball screw system includes the ball screw sliding table, AC …
-
Nanomanipulation modeling and simulation
A novel approach to better model nanomanipulation of a nanosphere lying on a stage via a pushing scheme is presented. Besides its amenability to nonlinear analysis and simulation, the proposed model is also effective in reproducing experimental behavior commonly observed during AFM-type …
-
Digital Twin for Prognostics: Analysis, Simulation, and Experiment
… of an equation discovery technique known as Model Error Discovery with Interpretability and Data Assimilation (MEDIDA) for DTs has proven feasible for structural identification and model updates. This thesis analyzes the elements of a DT for prognostics through structural identification for …
-
Modelling of longitudinal vehicle motion during low-speed driving
… is a well-known phenomenon which is caused by friction forces between the ground, tyres, disc-brake systems and suspensions. It is caused by two significant nonlinear singularities, which arise from friction forces between the ground and the tyres as well as within the disc-brake system. The …
-
DEVELOPMENT OF A KINETIC MODEL FOR STEERABLE CATHETERS FOR MINIMALLY INVASIVE SURGERY
… body. This will demand an accurate mathematical model that describes the force and motion relation called kinetic model, and unfortunately, such a kinetic model is not available in the literature. In this dissertation, a kinetic model for steerable catheters is presented wich captures the …
-
Nonlinear Modeling and Control of Automobiles with Dynamic Wheel-Road Friction and Wheel Torque Inputs
… presents a new nonlinear automobile dynamical model and investigates the possibility of automobile dynamic control with wheel torque utilizing this model. The model has been developed from first principles by applying classical mechanics. Inputs to the model are the four independent wheel …
-
Stick-slip friction and rotational vibration under large contact areas and uneven distributed loads
… research is aimed at the analysis of stick-slip frictional phenomenon when large contact areas are involved and, due to the physical structure of the system, high uneven contact loads are generated. The study will look at both mechanistic and tribological aspects of the problem. The main …
-
Stability of controlled mechanical system with parametric uncertainties in a realistic friction model
Friction compensation is challenging but imperative for control engineers. For high-performance engineering systems, a friction-model-based controller is typically required to accommodate the nonlinearities arisen from the friction model employed. It is well known that the parameters of the …
-
Optimal vibration suppression of beam-type structures using passive and semi-active tuned mass dampers
… vibratory energy effectively. The finite element model for general curved beams with variable curvatures under different assumptions (including/excluding the effects of the axial extensibility, shear deformation and rotary inertia) are developed and then utilized to solve the governing …
-
Nonlinear control of co-operating hydraulic manipulators
… system uncertainties, non-linearities and friction. The designed controllers allow hydraulically driven manipulators to (i) co-operatively handle a rigid object (payload) following a given trajectory, (ii) share the payload and (iii) maintain an acceptable internal force on the object. A …
-
Development and characterization of a novel piezoelectric-driven stick-slip actuator with anisotropic-friction surfaces
… stick-slip (PDSS) actuator, working on the friction-inertia concept, has the capacity of accomplishing an unlimited range of motion. It also holds the promises of simple configuration and low cost. On the other hand, the PDSS actuator has a relatively low efficiency and low loading …
-
BIOINSPIRED SURGICAL NEEDLE INSERTION MECHANICS IN SOFT TISSUES FOR PERCUTANEOUS PROCEDURES
… 38% using different needle sizes. An analytical LuGre friction model was used to explain the insertion mechanics and to confirm the experimental results. Lastly, to investigate the effect of the insertion force reduction, the tissue deformation and the tissue damage studies were performed. Using …
-
Design and Characterization of a Dual Electro-Hydrostatic Actuator
… is non-linear and that it is best described by a LuGre friction model.</p> <p>Black-box system identification techniques were applied to the EHA to determine piece-wise linear models. These trials showed that the non-linear friction as well as the seals in the actuator forced the system to have …
-
Pressure-Dependent Characterizations and Design Optimization of a Two Phase Fluidic Suspension Strut Using AI-Based Modeling Technique
… piston to separate gas and oil media, reduced friction, relatively lower temperature sensitivity, and larger effective area. The design also offered added flexibility in view of number and sizes of bleed orifices and blow-off valves. In the first stage, an analytical model is formulated …
-
Modeling of Frictional Contact Conditions in Structures
This thesis explores two aspects of modeling the behavior of joint friction in structures. The first aspect deals with the accurate and efficient simulation of a simple system that incorporates the LuGre friction law. Energy transfer and dissipation in a structural joint model is the second topic …
-
Adaptive and Robust Braking-Traction Control Systems
… system and tire torsional dynamics simulation models as well as experimental test rigs were developed. It is found that, indeed, rigid-wheel based controllers give degraded performance when coupled with low torsional stiffness tires. A closed-loop observer/nonlinear controller structure is …