Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 19 of 19 for “"LuGre friction"”.
-
BALL SCREW LINEAR ACTUATOR CONTROL AND IMPLEMENTATION BY APPLYING LUGRE FRICTION MODEL
… reasons. One of the major problems is nonlinear friction, which makes it difficult to estimate using the simple friction model. In this thesis, a LuGre friction model is introduced and applied to the ball screw system. The sponsor’s ball screw system includes the ball screw sliding table, AC …
-
Nonlinear Modeling and Control of Automobiles with Dynamic Wheel-Road Friction and Wheel Torque Inputs
… structure into the vehicle model. The frictional contact at the wheel-road interface is modeled by use of the LuGre dynamic friction model. Extensions to the existing two-dimensional LuGre friction model are derived and the steady-state of the friction model is compared to existing …
-
Modeling of Frictional Contact Conditions in Structures
… two aspects of modeling the behavior of joint friction in structures. The first aspect deals with the accurate and efficient simulation of a simple system that incorporates the LuGre friction law. Energy transfer and dissipation in a structural joint model is the second topic of this thesis. It …
-
Nanomanipulation modeling and simulation
… of the nanomanipulator tip and nanosphere, friction between the nanosphere and the stage, and the contact deformation between the nanomanipulator tip and the nanosphere. The main feature of the proposed nanomanipulation model is the Lund-Grenoble (LuGre) dynamic friction model that reliably …
-
Digital Twin for Prognostics: Analysis, Simulation, and Experiment
… single nonlinearity and a nonlinearity caused by frictional dynamics of the LuGre friction model with an additional unmeasurable state. These elements are crucial to obtain a DT that replicates the physical system and provides a more accurate RUL calculation for prognostics.
-
Modelling of longitudinal vehicle motion during low-speed driving
… is a well-known phenomenon which is caused by friction forces between the ground, tyres, disc-brake systems and suspensions. It is caused by two significant nonlinear singularities, which arise from friction forces between the ground and the tyres as well as within the disc-brake system. The …
-
DEVELOPMENT OF A KINETIC MODEL FOR STEERABLE CATHETERS FOR MINIMALLY INVASIVE SURGERY
… in motion, (2) the deformable pathway, (3) the friction between the catheter and the pathyway, and (4) the contact between the catheter and pathway. A non-linear finite element system (SPACAR) was employed to capture these characteristics. A test-bed was built and an experiment was carried out …
-
Stick-slip friction and rotational vibration under large contact areas and uneven distributed loads
… research is aimed at the analysis of stick-slip frictional phenomenon when large contact areas are involved and, due to the physical structure of the system, high uneven contact loads are generated. The study will look at both mechanistic and tribological aspects of the problem. The main …
-
Trajectory generation, control, and geometric error compensation for a 9-axis micromachining center
… is introduced. A sliding mode controller with a LuGre friction compensator is designed to control the position of the micromill, based on identified physical parameters. A lead-lag position controller with an integrator and a notch filter is designed to control the rotary table. Since the …
-
Adaptive Tire Model For Dynamic Tire-Road Friction Force Estimation
… area remains of utmost importance: tire and road friction forces. The vehicle’s interaction with the road remains the dominant mean of vehicle control. Ultimately, the tire-road interaction will determine the majority of the vehicle’s capabilities and as the understanding of the interface …
-
Stability of controlled mechanical system with parametric uncertainties in a realistic friction model
Friction compensation is challenging but imperative for control engineers. For high-performance engineering systems, a friction-model-based controller is typically required to accommodate the nonlinearities arisen from the friction model employed. It is well known that the parameters of the …
-
Optimal vibration suppression of beam-type structures using passive and semi-active tuned mass dampers
… SAMD system. A new hysteresis model based on the LuGre friction model is developed to analyze the dynamic behavior of large-scale MR-damper (MR-9000 type) accurately and efficiently. The gradient based optimization technique and least square estimation method have been utilized to identify the …
-
Nonlinear control of co-operating hydraulic manipulators
… system uncertainties, non-linearities and friction. The designed controllers allow hydraulically driven manipulators to (i) co-operatively handle a rigid object (payload) following a given trajectory, (ii) share the payload and (iii) maintain an acceptable internal force on the object. A …
-
Development and characterization of a novel piezoelectric-driven stick-slip actuator with anisotropic-friction surfaces
… stick-slip (PDSS) actuator, working on the friction-inertia concept, has the capacity of accomplishing an unlimited range of motion. It also holds the promises of simple configuration and low cost. On the other hand, the PDSS actuator has a relatively low efficiency and low loading …
-
BIOINSPIRED SURGICAL NEEDLE INSERTION MECHANICS IN SOFT TISSUES FOR PERCUTANEOUS PROCEDURES
… 38% using different needle sizes. An analytical LuGre friction model was used to explain the insertion mechanics and to confirm the experimental results. Lastly, to investigate the effect of the insertion force reduction, the tissue deformation and the tissue damage studies were performed. Using …
-
Design and Characterization of a Dual Electro-Hydrostatic Actuator
… is non-linear and that it is best described by a LuGre friction model.</p> <p>Black-box system identification techniques were applied to the EHA to determine piece-wise linear models. These trials showed that the non-linear friction as well as the seals in the actuator forced the system to have …
-
Study of Vehicle Dynamics with Planar Suspension Systems (PSS)
… and longitudinal directions. A dynamic 2D tire friction model based on the LuGre friction theory is modified to simulate the dynamic frictional interaction in the tire-ground contact pitch. The ride quality of a PSS vehicle is evaluated in accordance with the ISO 2631 and compared with that of a …
-
Pressure-Dependent Characterizations and Design Optimization of a Two Phase Fluidic Suspension Strut Using AI-Based Modeling Technique
… piston to separate gas and oil media, reduced friction, relatively lower temperature sensitivity, and larger effective area. The design also offered added flexibility in view of number and sizes of bleed orifices and blow-off valves. In the first stage, an analytical model is formulated …
-
Adaptive and Robust Braking-Traction Control Systems
The designs of commercial Anti-Lock Braking Systems often rely on assumptions of a torsionally rigid tire-wheel system and heavily rely on hub-mounted wheel speed sensors to manage tire-road slip conditions. However, advancements in high-bandwidth braking systems, in-wheel motors, variations in …