Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 7 of 7 for “"LuGre model"”.

  1. Physically Meaningful Harmonization of Tire/Pavement Friction Measurement Devices

    … As a foundation for such a harmonization, the LuGre tire model that employs physically meaningful parameters to represent the main attributes of tire/pavement friction was evaluated and validated. Measurements of tire/pavement friction by three widely used PFMDs; Locked Wheel Skid Trailer …

    usf Repository record for Physically Meaningful Harmonization of Tire/Pavement Friction Measurement Devices (opens in a new tab)

  2. Stick-slip friction and rotational vibration under large contact areas and uneven distributed loads

    … conditions. A non-linear finite element model has been developed using ANSYS to obtain an understanding of the contact pressure distribution at the interface of contact of large surfaces due to the applied loads. A mathematical model of this distribution has been derived based on the …

    ubc Repository record for Stick-slip friction and rotational vibration under large contact areas and uneven distributed loads (opens in a new tab) Download PDF for Stick-slip friction and rotational vibration under large contact areas and uneven distributed loads (opens in a new tab)

  3. Modeling of the piezoelectric-driven stick-slip actuators

    … The aim of this research is to develop a model to represent the displacement of the end-effecter of the PDSS actuators, in which both the presliding friction and the PEA dynamics are addressed. In order to represent the presliding friction, the models reported in literatures, including …

    sask Repository record for Modeling of the piezoelectric-driven stick-slip actuators (opens in a new tab)

  4. Stability of controlled mechanical system with parametric uncertainties in a realistic friction model

    … high-performance engineering systems, a friction-model-based controller is typically required to accommodate the nonlinearities arisen from the friction model employed. It is well known that the parameters of the friction model used in the friction compensation are nearly impossible to be …

    manitoba Repository record for Stability of controlled mechanical system with parametric uncertainties in a realistic friction model (opens in a new tab)

  5. Development and characterization of a novel piezoelectric-driven stick-slip actuator with anisotropic-friction surfaces

    … compared to the one with the IF surfaces. A model was also developed to represent the displacement of the novel PDSS actuator. The dynamics of the PEA and the platform were approximated by using a second order dynamic system. The pre-sliding friction behaviour involved was investigated by …

    sask Repository record for Development and characterization of a novel piezoelectric-driven stick-slip actuator with anisotropic-friction surfaces (opens in a new tab)

  6. TIP trajectory tracking of flexible-joint manipulators

    … which consists of the non-linear dynamic LuGre model and a Proportional-Derivative (PD) compensator, and a novel friction compensation method whose design is based on the Work-Energy principle. Each of these proposed controllers has some advantages and drawbacks, and hence, depending on …

    sask Repository record for TIP trajectory tracking of flexible-joint manipulators (opens in a new tab)

  7. Controle em cascata e a estrutura variável com adaptação de parâmetros e compensação de atrito de um servoposicionador pneumático

    … de um servoposicionador pneumático. Um modelo matemático para o servoposicionador pneumático é apresentado, com atenção especial sendo dada à modelagem dos efeitos do atrito. Para a representação desses efeitos, é proposta uma modificação da estrutura matemática de um modelo de atrito …

    brazil-ufrgs Repository record for Controle em cascata e a estrutura variável com adaptação de parâmetros e compensação de atrito de um servoposicionador pneumático (opens in a new tab)