Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 18 of 18 for “"Luting agent"”.

  1. Effects of cementation on exposed luting agent profile at implant-supported crowns

    … of both discrepancy levels, cemented with the luting composite and excess cement removed after cement setting had the lower SaCPIR scores (P<.05). The factorial design analysis showed that SaCPIR was mainly influenced by the initial marginal discrepancy level (P<.0001) and the finishing …

    greece Repository record for Effects of cementation on exposed luting agent profile at implant-supported crowns (opens in a new tab)

  2. The influence of delayed light curing on the polymerization contraction stress and degree of conversion in dual-cured resin luting agents

    … degree of conversion (DC) of a dual-cured resin luting agent, and 2) To determine the amount of delay in photo-initiation of the dual-cured resin cements that can achieve a reduced PCS value with the highest possible DC. The amount of PCS and DC of a dual-cured resin luting agent was determined …

    iupui Repository record for The influence of delayed light curing on the polymerization contraction stress and degree of conversion in dual-cured resin luting agents (opens in a new tab)

  3. Volumetric dimensional changes of luting cements

    The luting agent is a crucial factor in the outcome of cemented fixed restorations. A new water-based cement, Ceramir C&B (CM), approved to be marketed in the US, is composed of calcium aluminate and glass ionomer. CM is a luting agent indicated for permanent cementation of cast restorations, …

    iupui Repository record for Volumetric dimensional changes of luting cements (opens in a new tab)

  4. Regional In Vitro Retention of Fiber Posts

    … were significantly affected (a=0.05) by the luting agent and the root position. RelyX Unicem 2 and Robust SmartCem 2 (self adhesive cements) had ignificantly higher bond strengths compared with ParaCore (self etch) and MultiCore flow, FluoroCore 2 (total etch). The apical region of the root …

    uab Repository record for Regional In Vitro Retention of Fiber Posts (opens in a new tab)

  5. Ličio disilikato restauracijų cementavimas: metodikos ir cementavimo medžiagos pasirinkimas /

    … of restoration. 2. To determine the most used luting materials by prosthodontists and the reasons behind their choice. 3. To compare the cementing materials recommended in the scientific literature and used by specialists in prosthodontists and general dentists for lithium disilicate …

    vilnius Repository record for Ličio disilikato restauracijų cementavimas: metodikos ir cementavimo medžiagos pasirinkimas / (opens in a new tab)

  6. Quantitative comparison of nanoleakage among five resin luting agents after aging

    … of self-etching and self-bonding resin luting agents are not fully understood. The objective of the study was to investigate adhesive layer degradation by using a nanoleakage technique with five different resin luting agents. Materials and Methods: Five different resin luting systems, …

    iupui Repository record for Quantitative comparison of nanoleakage among five resin luting agents after aging (opens in a new tab)

  7. In-vitro-Studie zur Analyse des Haftverbundes faserverstärkter Wurzelstifte mit verschiedenen Befestigungssystemen unter besonderer Berücksichtigung des Einsatzes eines Universaladhäsivsystems im Wurzelkanal

    … posts luted in the root canal using different luting systems, including a multi mode adhesive system. Materials and methods: 128 human anterior teeth were endodontically treated, root filled and post space preparations were conducted. The cavity was passively irrigated using an ultrasonic …

    fu-berlin Repository record for In-vitro-Studie zur Analyse des Haftverbundes faserverstärkter Wurzelstifte mit verschiedenen Befestigungssystemen unter besonderer Berücksichtigung des Einsatzes eines Universaladhäsivsystems im Wurzelkanal (opens in a new tab)

  8. Bond strength evaluation of two resin cements with two adhesives and analysis of mode of failure

    … from the second generation of composite luting agent (NX2). The aim of this study was to evaluate microtensile bond strength and mode of failure of NX3 and NX2 with two different adhesive systems (total-etch and self-etch) after 1 week and after 3 months of storage. Methods: Sixty-four …

    iupui Repository record for Bond strength evaluation of two resin cements with two adhesives and analysis of mode of failure (opens in a new tab)

  9. Flexural strength and shear bond strength of self-etching/self-adhesive resin luting agents

    Traditional resin luting agents generally have mechanical properties that are superior to the newer so-called “universal” self-etching/self-adhesive resin luting agents. However, recent reports indicate that some properties of these new luting agents have been improved, approaching those of the …

    iupui Repository record for Flexural strength and shear bond strength of self-etching/self-adhesive resin luting agents (opens in a new tab)

  10. The Effect Of Cementation Technique On The Retention Of Adhesively Cemented Prefabricated Posts

    … of endodontically treated teeth. Bonding agents may improve the post and core per-formance. Correct dentin bonding procedures are a critical factor in the bonded post re-tention, but adequate bonding in the canal space has been reported difficult to achieve. The operator is unable to …

    uab Repository record for The Effect Of Cementation Technique On The Retention Of Adhesively Cemented Prefabricated Posts (opens in a new tab)

  11. Evaluation of water sorption and solubility behavior of nine different polymeric luting materials

    … is largely impacted by the maintenance of the luting cement and the adhesive bond. When exposed to water or saliva, most restorative materials undergo hydrolytic degradation. The purpose of this study is to evaluate the water solubility and water sorption characteristics of newly introduced …

    iupui Repository record for Evaluation of water sorption and solubility behavior of nine different polymeric luting materials (opens in a new tab)

  12. Einfluss von thermozyklischer Belastung und Lokalisation auf die Haftung unterschiedlicher Befestigungskomposite im Wurzelkanal

    Problemstellung: Die Auswahl eines geeigneten Befestigungssystems für faserverstärkte Stifte im Wurzelkanal ist aufgrund der großen Vielfalt seitens der Hersteller und der kontroversen Ergebnisse in der Literatur erschwert. Zielsetzung: Die Studie sollte den Einfluss einer thermozyklische Belastung …

    fu-berlin Repository record for Einfluss von thermozyklischer Belastung und Lokalisation auf die Haftung unterschiedlicher Befestigungskomposite im Wurzelkanal (opens in a new tab)

  13. Properties and Applications of Polymer-Infiltrated Ceramic Network Materials

    … fracture toughness (IFT) of a resin composite luting agent (RCLA) with PICNs, represented by an experimental and a commercial PICN (Vita Enamic), versus DF materials. Lithium disilicate glass-ceramic (IPS e.max CAD, EMX) was also tested as a gold standard for comparison. Samples were pretreated …

    liege Repository record for Properties and Applications of Polymer-Infiltrated Ceramic Network Materials (opens in a new tab) Download PDF for Properties and Applications of Polymer-Infiltrated Ceramic Network Materials (opens in a new tab)

  14. Diametral Tensile Strength, Microhardness, Surface Modulus, and Surface Morphology of Novel,Antibacterial Orthodontic Adhesives.

    … a zinc phosphate cement. This acted more as a luting agent then adding to the actual adherence of the band to the tooth. In addition, often times the cement would wash out and upon the band removal white spot lesions and or carious lesions were present. The development of glass monomer cements …

    temple Repository record for Diametral Tensile Strength, Microhardness, Surface Modulus, and Surface Morphology of Novel,Antibacterial Orthodontic Adhesives. (opens in a new tab)

  15. In vitro Untersuchung zur Ermittlung der Scherfestigkeit von unterschiedlichen Befestigungszementen zu zahnfarbenen Restaurationsmaterialien sowie Echtzähnen

    Die Versorgung von Zahnhartsubstanzdefekten mittels indirekter Restaurationen über Befestigungszemente gehört in Zahnarztpraxen zur alltäglichen Arbeit. Eine stetige Weiterentwicklung der techniksensitiven adhäsiven Befestigungssysteme ergibt eine Bandbreite an unterschiedlichen …

    wurz-thes Repository record for In vitro Untersuchung zur Ermittlung der Scherfestigkeit von unterschiedlichen Befestigungszementen zu zahnfarbenen Restaurationsmaterialien sowie Echtzähnen (opens in a new tab)

  16. Verbundfestigkeit adhäsiv eingegliederter Glasfaserstifte in Abhängigkeit vom Adhäsivsystem und der Schichtstärke des Befestigungskomposits

    Bei dem Vergleich der verschiedenen Schichtstärken (200μm/400μm) zeigten sich keine signifikanten Unterschiede in der Adhäsionskraft. Auch das zusätzliche Auftragen eines Haftvermittlers konnte zu keiner nennenswerten Verbesserung des Haftverbundes führen. Sind das Befestigungkomposit, Adhäsiv- und …

    wurz-thes Repository record for Verbundfestigkeit adhäsiv eingegliederter Glasfaserstifte in Abhängigkeit vom Adhäsivsystem und der Schichtstärke des Befestigungskomposits (opens in a new tab)

  17. Untersuchung von mechanischen Eigenschaften, Bruchfestigkeit und Haftfestigkeit von Multilayer Zirkoniumdioxidkeramik zu dualhärtenden Befestigungskompositen

    Ziel der Arbeit war es, den Einfluss der Platzierung der Restauration im Rohling auf die mechanischen Eigenschaften und die Scherfestigkeit zu dualhärtenden Befestigungskompositen zu untersuchen sowie Unterschiede in der Bruchfestigkeit zwischen zwei Multilayerkeramiken zu ermitteln. Material und …

    wurz-thes Repository record for Untersuchung von mechanischen Eigenschaften, Bruchfestigkeit und Haftfestigkeit von Multilayer Zirkoniumdioxidkeramik zu dualhärtenden Befestigungskompositen (opens in a new tab)