Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 37 for “"MEMS switch"”.

  1. Printed Flexible RF MEMS Switch

    … investigates an updated design for a flexible RF MEMS switch printed with additive manufacturing. The new design incorporates changes in coplanar waveguide dimensions, ink, multilayer printing for the base, and cantilever dimensions. MATLAB was used to calculate the coplanar waveguide, resulting …

    texas-state Repository record for Printed Flexible RF MEMS Switch (opens in a new tab)

  2. Development of a spring-less RF MEMS switch

    … on the development of a novel 77GHz low loss MEMS switch with a mechanically unrestrained armature, over a RF transmitting coplanar waveguide. Electrostatic actuation is used during the switching operation. The attractive force from the electrostatic field is generated by a pair of the …

    soton Download PDF for Development of a spring-less RF MEMS switch (opens in a new tab)

  3. Design and modelling of a contact-less piezoelectric RF MEMS switch

    … communications and remote sensing equipment. MEMS devices for switching of microwave or millimetre wave signals show promise for applications in areas such as agile radio systems, reconfigurable tuning and matching networks, and phased arrays. The mechanical operating principle of MEMS …

    auckland-ms Repository record for Design and modelling of a contact-less piezoelectric RF MEMS switch (opens in a new tab)

  4. Novel Test Fixture for Characterizing Mems Switch Microcontact Reliability and Performance

    Microelectromechanical systems (MEMS) switch is considered as a better alternative than the conventional solid-state DC and RF switches due to their low contact resistance approximately 1 Ω, near-zero power consumption approximately 0 W, low insertion loss approximately 0.2 dB, and high isolation …

    marquette Repository record for Novel Test Fixture for Characterizing Mems Switch Microcontact Reliability and Performance (opens in a new tab)

  5. Printed and Flexible Micro-Electro-Mechanical-System (MEMS) Switch for High-Frequency Applications

    A multitude of micro-electro-mechanical-system (MEMS) devices has been developed and commercialized over the past decades. These devices are smaller in size, have higher accuracy, sensitivity, selectivity, and high switching density. All these criteria make MEMS a good alternative for switching and …

    texas-state Repository record for Printed and Flexible Micro-Electro-Mechanical-System (MEMS) Switch for High-Frequency Applications (opens in a new tab)

  6. Design and Fabrication of Electrostatically Actuated and Inkjet Printed Micro-Electro-Mechanical-System (MEMS) Switch

    … of electrostatically actuated and inkjet printed MEMS switch. It introduces a novel design and fabrication process where it combines two different technologies - MEMS technology and inkjet printing technology. It should also to be noted that, for the first-time inkjet printing technology is …

    texas-state Repository record for Design and Fabrication of Electrostatically Actuated and Inkjet Printed Micro-Electro-Mechanical-System (MEMS) Switch (opens in a new tab)

  7. Development of Compound Semiconductor FET and Integrated Low -Voltage RF MEMS Switch Technology for Reconfigurable MMIC Applications

    … GaAs MESFET, the AlGaN/GaN HEMT, and the RF MEMS switch. The MESFET is a relatively mature technology that has proven to be a low-cost solution for many MMIC uses, and this work will describe enhancement- and depletion-mode 0.12-mum-gate device development with ft higher than 120 GHz. Wide …

    uiuc Repository record for Development of Compound Semiconductor FET and Integrated Low -Voltage RF MEMS Switch Technology for Reconfigurable MMIC Applications (opens in a new tab)

  8. Measurement and model of a radio frequency microelectromechanical switch

    … fabrication of microelectromechanical systems (MEMS) has been introduced. One potential application of this process is a radio frequency (RF) MEMS switch. This thesis provides an overview of the measurement and modeling techniques used to verify the functionality of an RF MEMS switch that was …

    uiuc Repository record for Measurement and model of a radio frequency microelectromechanical switch (opens in a new tab)

  9. RF MEMS Switches with Novel Materials and Micromachining Techniques for SOC/SOP RF Front Ends

    … dissertation deals with the development of RF MEMS switches with novel materials and micromachining techniques for the RF and microwave applications. To enable the integration of RF and microwave components on CMOS grade silicon, finite ground coplanar waveguide transmission line on CMOS grade …

    gatech Repository record for RF MEMS Switches with Novel Materials and Micromachining Techniques for SOC/SOP RF Front Ends (opens in a new tab)

  10. Design and self-calibration scheme for RF circuits using mems in 3D packages

    … Amplifier (LNA) with micro electro-mechanical switches (MEMS) using three dimensional (3D) through-silicon via (TSV) packaging technology. The LNA can self-calibrate its gain and noise figure (NF). On-chip testing is performed using a peak detector and a digital signal processor (DSP). A …

    alabama Repository record for Design and self-calibration scheme for RF circuits using mems in 3D packages (opens in a new tab)

  11. Optical MEMS Switches: Theory, Design, and Fabrication of a New Architecture

    … and cost of microelectromechanical systems (MEMS) optical switches are now the important factors driving the development of MEMS optical switches technology. The employment of MEMS in the design and fabrication of optical switches through the use of micromachining fabricated micromirrors …

    waterloo Repository record for Optical MEMS Switches: Theory, Design, and Fabrication of a New Architecture (opens in a new tab)

  12. Fabrication development of microelectro mechanical switches with nanocrystalline graphite contact

    … a novel design and fabrication process for MEMS (Micro-Electro-Mechanical Systems) switches, focusing on improving performance and reliability, especially under various temperature conditions. The research presents a novel in-plane MEMS switch coupled with dual awl meander springs, achieving …

    soton Download PDF for Fabrication development of microelectro mechanical switches with nanocrystalline graphite contact (opens in a new tab)

  13. Novel rf mems tunable filters with adjustable spurious suppression

    … Frequency (RF) Microelectromechanical Systems (MEMS) -based tunable microwave filters for RF and microwave applications. The methodology for the design of coupled resonator filters is explained in detail and is used to design an end-coupled microstrip filter at 1.5 GHz with inductive loading …

    tamu Repository record for Novel rf mems tunable filters with adjustable spurious suppression (opens in a new tab)

  14. DEVELOPMENT OF NEMS RELAYS IN LOGIC COMPUTATION AND RUGGED ELECTRONICS

    … leveraging on nano/microelectromechanical (N/MEMS) switches. The temperature region beyond 300 ?C is explored where conventional silicon electronics is deemed dysfunctional. Devices characteristics, such as reliability, functionality and structural integrity are systematically evaluated and …

    nus Repository record for DEVELOPMENT OF NEMS RELAYS IN LOGIC COMPUTATION AND RUGGED ELECTRONICS (opens in a new tab) Download file for DEVELOPMENT OF NEMS RELAYS IN LOGIC COMPUTATION AND RUGGED ELECTRONICS (opens in a new tab)

  15. Nanoscale Mapping of In-Situ Micro Electro Mechanical Systems with Atomic Force Microscopy

    Micro-electro-mechanical-systems (MEMS) are increasingly at our fingertips. To understand and thereby improve their performance, especially given their ever-decreasing sizes, it is crucial to measure their functionality in-situ. Atomic Force Microscopy (AFM) is well suited for such studies, …

    uconn-diss Repository record for Nanoscale Mapping of In-Situ Micro Electro Mechanical Systems with Atomic Force Microscopy (opens in a new tab)

  16. In-situ surface wear processes of gold coated carbon nanotube MEMS electrical contacts

    … and use, of an apparatus to investigate lifetime switching wear of micro electromechanical system (MEMS) switch contacts. The investigation is focused on a composite contact material that is composed of vertically aligned multiwalled carbon nanotubes (MWCNT) with a conductive gold film coating to …

    soton Download PDF for In-situ surface wear processes of gold coated carbon nanotube MEMS electrical contacts (opens in a new tab)

  17. Modeling and Simulation of Microelectromechanical Systems in Multi-Physics Fields

    … to simulate microelectromechanical systems (MEMS) in multi-physics fields. These include electric actuation (AC and DC), squeeze-film damping, thermoelastic damping, and structural forces. The second objective is to investigate MEMS phenomena, such as squeeze-film damping and dynamic pull-in, …

    vt Repository record for Modeling and Simulation of Microelectromechanical Systems in Multi-Physics Fields (opens in a new tab)

  18. Fabrication and optoelectromechanical characterization of an electrostatically actuated MEMS micromirror

    … agility. MicroElectroMechanical System (MEMS) is a keystone technology for all-optical networking. Instead of converting optical signals to electrical (O/E conversion) for processing/switching, and then converting back to optical again, an optical MEMS switch requires no O/E conversion. …

    ttu Repository record for Fabrication and optoelectromechanical characterization of an electrostatically actuated MEMS micromirror (opens in a new tab)

  19. Experimental considerations for fabrication of radio frequency micro and nano electro mechanical systems switches

    … Frequency Micro-Electro-Mechanical Systems (RF MEMS) is the “enabling” technology that can offer reduction in weight, volume, cost and power consumption with improved functionality. RF MEMS technology can be used for reconfigurable front-end communication systems. The use of the same piece of …

    unsw Repository record for Experimental considerations for fabrication of radio frequency micro and nano electro mechanical systems switches (opens in a new tab)

Page 1 of 2