Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 5 of 5 for “"MP35N"”.
-
Investigation of secondary hardening in Co-35Ni-20Cr-10Mo alloy using analytical scanning transmission electron microscopy
The mechanism of secondary hardening in MP35N (Co-35Ni-20Cr-10Mo) alloy due to exposures at elevated temperatures has been studied. It was observed that short exposure to elevated temperatures increased the ultimate tensile strength and yield stress while decreasing the elongation of MP35N wires. …
-
Microstructure-sensitive fatigue modeling of medical-grade fine wire
… high-cycle fatigue (HCF) performance of thin MP35N alloy wires used as conductors in cardiac leads. The major components of this model consist of a microstructure generator which constructs a statistically representative microstructure, a crystal plasticity finite-element analysis to determine …
-
Phonon Modulation By Polarized Lasers For Material Modification
… and thermo-treatment were applied on the Ta and MP35N wires. The Pt concentration in laser platinized Ta and MP35N wires was determined using EDS. The ultimate tensile strength, fatigue lives and lead tip heating in real MRI environment of those wires were measured. The lead tip hating of the …
-
Finite Element Modeling and Experimental Characterization of Overmolded Gold-Palladium Composite Leads and their Mechanical Behavior under Cyclic Fatigue for Long-Term Implant Applications
… made from materials such as platinum-iridium and MP35N stainless steel that are overmolded in an insulative material. These materials are not possible to bond with to electrode array used in the ANI device, necessitating the evaluation of a new material like Au-Pd to ensure its functionality and …
-
An investigation into stent expansion using numerical and experimental techniques
… linear elasticity was defined using values for MP35N cobalt chromium alloy: Young's Modulus of 232 GPa, Poisson's Ratio of 0.26. A piecewise linear function was used to represent the non-linear plasticity of the material through a von Mises plasticity model with isotropic hardening. Due to …