Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 129 for “"MQW"”.

  1. Characterisation of GaAsBi based heterojunction and MQW photodiodes

    … devices and multiple quantum well (MQW) structures, this work systematically investigated relationships among lattice strain, optical response, dark current, and avalanche gain–noise performance. Moderate Bi content effectively suppresses hole-initiated impact ionization at high …

    whiterose Download PDF for Characterisation of GaAsBi based heterojunction and MQW photodiodes (opens in a new tab)

  2. Mode Conversions in Active Semiconductor MQW Integrated Optics Devices

    … E12, E21, and E22 modes. The fabricated InGaAsP MQW FMSOA shows that the modes are confined to the ridge waveguide, overlapping the quantum wells with approximately the same amount, leading to equalized gain for each of the four waveguide modes. Second, we develop an all-optical mode and …

    ucf Repository record for Mode Conversions in Active Semiconductor MQW Integrated Optics Devices (opens in a new tab)

  3. Synchrotron radiation-based characterization of GaN- based MQW structures and strongly correlated materials

    … properties of GaN-based multiple quantum well (MQW) structures grown on trapezoidal shaped GaN ridges. Results where interpreted within the framework of vapor-phase diffusion and surface-migration effects during the metalorganic vapor phase epitaxial growth. The relatively short diffusion length …

    njit Repository record for Synchrotron radiation-based characterization of GaN- based MQW structures and strongly correlated materials (opens in a new tab)

  4. Impact ionization Characterisation of Al0.70In0.30As0.74Sb0.26 p-i-n and GaAs/Ga0.96AsBi0.04 MQW photodiodes

    … a series of GaAsBi/GaAs multiple quantum well (MQW) structures grown in a p-i-n configuration was undertaken, and their ionization behaviours was examined through photomultiplication measurements. The α/β ratio in GaAs was increased by suppressing hole impact ionization, achieved by modifying …

    whiterose Download PDF for Impact ionization Characterisation of Al0.70In0.30As0.74Sb0.26 p-i-n and GaAs/Ga0.96AsBi0.04 MQW photodiodes (opens in a new tab)

  5. Simulation study of signal coupling for monolithic GaAs 8-12 micron direct injection MQW image sensor

    … 8-12 micron GaAs/A1GaAs direct injection MQW infrared image sensor with 100% fill factor has been performed by using PISCES-IIB and PSPICE simulators. A vertical structure with the readout circuit built on the back of MQW was adopted for simulations. Both the static and transient …

    njit Repository record for Simulation study of signal coupling for monolithic GaAs 8-12 micron direct injection MQW image sensor (opens in a new tab)

  6. Nanoscale Spectroscopic Characterization of InGaN/GaN Multiple Quantum Wells on GaN Nanorods

    … of InGaN/GaN multiple quantum wells (MQW) on top of GaN nanorods. InGaN/GaN MQW is a promising candidate material for high-performance light-emitting diodes and solar cells. In this thesis, InGaN/GaN MQW nanorods were fabricated by nanosphere lithography, a top-down method using …

    unsw Repository record for Nanoscale Spectroscopic Characterization of InGaN/GaN Multiple Quantum Wells on GaN Nanorods (opens in a new tab)

  7. Assessing the optical and optoelectronic characteristics of bulk and multiple quantum well GaAs(1-x)Bi(x)/GaAs devices for photovoltaic applications

    … conducted on GaAsBi/GaAs multiple quantum well (MQW) strained and relaxed samples to evaluate their optical quality. The MQW structures exhibit higher luminescence intensity, indicating better optical quality compared to GaAsBi bulk samples. The power-dependent photoluminescence of InGaAs/GaAs …

    whiterose Download PDF for Assessing the optical and optoelectronic characteristics of bulk and multiple quantum well GaAs(1-x)Bi(x)/GaAs devices for photovoltaic applications (opens in a new tab)

  8. Fabrication of InGaN quantum wells for LED applications

    … to grow InGaN/(InAl)GaN multiple quantum well (MQW) and LED structures on GaN/sapphire substrates. Also a multistep growth method for the growth of GaN on sapphire is investigated. The method enables a tenfold reduction of threading dislocation (TD) density in the GaN layer compared to …

    aalto Repository record for Fabrication of InGaN quantum wells for LED applications (opens in a new tab)

  9. Theoretical Study and Characterisation of Hot Carrier Solar Cell Materials

    … multiple quantum well superlattices (MQW-SL) have been performed in an effort to search for suitable hot carrier absorbers for the Hot Carrier Solar Cell (HCSC). One goal of the study is to examine whether the suppression of the Klemens phonon decay mechanism truly can increase the …

    unsw Repository record for Theoretical Study and Characterisation of Hot Carrier Solar Cell Materials (opens in a new tab)

  10. Approaches for optimizing light emitting diode structures based on III-N materials

    … and InGaN/InAlGaN multiple quantum well (MQW) structures was studied to improve internal quantum efficiency (IQE) of the LEDs. Electron blocking layer (EBL) was developed to increase carrier confinement into the active MQW region. The samples were characterized by x-ray diffraction (XRD), …

    aalto Repository record for Approaches for optimizing light emitting diode structures based on III-N materials (opens in a new tab)

  11. Towards multiple quantum well optically pumped far infrared lasers

    … based on GaAs/AlGaAs multiple quantum well (MQW) structures are a potential coherent source in the far infrared (FIR) wavelengths. The FIR (~ 30 to 300 µm) is a region within the electromagnetic spectrum that has seen relatively little development. No practical solid-state lasers have been …

    soton Download PDF for Towards multiple quantum well optically pumped far infrared lasers (opens in a new tab)

  12. ALL-OPTICAL NONLINEAR WAVEGUIDE DEVICES.

    … fabrication in bulk and multiple-quantum-well (MQW) gallium arsenide (GaAs). For the first time, absorption, carrier diffusion, and thermal effects are included in the theoretical investigation of the NLMZ and NLDC. The nonlinear dependence of the coupling terms, which has been neglected in all …

    arizona-thes Repository record for ALL-OPTICAL NONLINEAR WAVEGUIDE DEVICES. (opens in a new tab)

  13. Multiple Quantum Well Structures As Optical Waveguides

    … layer is a multiple quantum well structure (MQWS), consisting of alternate layers of high and low band gap semiconductors with the electrons and holes in the MQWS being confined to the low band gap material. This confinement in two dimensions alters greatly the electronic and optical …

    glasgow Download PDF for Multiple Quantum Well Structures As Optical Waveguides (opens in a new tab)

  14. Simulation study of monolithic 8-12 micron GaAs/AlGaAs multiple quantum well infrared image sensor

    … a monolithic GaAs/AlGaAs multiple quantum well (MQW) photoconductor integrated with a GaAs MESFET readout circuit. The readout MESFET's are located in the top layer of the MQW so that a relatively standard GaAs MESFET design and processing technology can be used. The theoretical feasibility of …

    njit Repository record for Simulation study of monolithic 8-12 micron GaAs/AlGaAs multiple quantum well infrared image sensor (opens in a new tab)

  15. Simulation and design of GaAs/A1[subscript]xG[superscript 1-][subscript]xAs Multiple-Quantum-Well Fabry-Perot optical modulators

    … 1--[subscript]xAs Multiple-Quantum-Well (MQW) normal-incident modulators, including the theoretical calculations of the absorption coefficient and refractive index of GaAs/A1[subscript]xGa[subscript 1][subscript]xAs quantum wells (QWs) and bulk A1[subscript]xGa[subscript 1][subscript]xAs …

    missouri Repository record for Simulation and design of GaAs/A1[subscript]xG[superscript 1-][subscript]xAs Multiple-Quantum-Well Fabry-Perot optical modulators (opens in a new tab)

  16. Saturable absorption in single-walled carbon nanotubes at 1550 nm

    … provide an alternative to multi-quantum well (MQW) based saturable absorbers at optical communication wavelengths. This work is aimed at measuring the nonlinear absorption coefficient of SWNTs at 1550 nm and to compare the performance of SWNT based saturable absorbers with MQW based saturable …

    ubc Repository record for Saturable absorption in single-walled carbon nanotubes at 1550 nm (opens in a new tab) Download PDF for Saturable absorption in single-walled carbon nanotubes at 1550 nm (opens in a new tab)

  17. Stimulated emission and optical gain in ingan structures /

    … which made InGaN/GaN multiple quantum wells (MQWs) indispensable in the field of solid-state laser sources. However, alloys with high In content suffer from some growth issues such as large strain and defect formation due to differences in InN and GaN material properties, which, consequently, …

    vilnius Repository record for Stimulated emission and optical gain in ingan structures / (opens in a new tab)

  18. Material processing of quantum well infrared photodetectors

    … (RTA) GaAs/AlGaAs multiple quantum well (MQW) infrared (IR) photodetectors (QWIPs) epitaxially grown on GaAs and Si substrates is presented. The advances in epitaxial growth allow the precise control of the dimensions, doping, and matrix concentration of the MQW. Therefore, the design of a …

    uiuc Repository record for Material processing of quantum well infrared photodetectors (opens in a new tab)

Page 1 of 7