Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 49 for “"Machinable"”.

  1. Mechanical properties of printable and machinable denture tooth material

    OBJECTIVES: The aim of this study was to compare and determine the mechanical properties of printed and machined provisional and definitive dental restorations. Specimens from various materials were obtained via different production techniques, additive or subtractive manufacture. These samples …

    bu Repository record for Mechanical properties of printable and machinable denture tooth material (opens in a new tab)

  2. Mechanical and optical properties of machinable and pressable glass ceramic

    OBJECTIVES: To investigate the effect of various finishing procedures and repeated firings on color stability and translucency of different ceramics. Also, to examine the mechanical properties after finishing procedures. MATERIALS & METHODS: Four glass-ceramics were investigated; IPS e.max CAD, IPS …

    bu Repository record for Mechanical and optical properties of machinable and pressable glass ceramic (opens in a new tab)

  3. Machinability studies of machinable glass-ceramic materials: macor and boron nitride

    Machinability assessment of two ceramic materials was carried out using uncoated carbide tool inserts under dry conditions. The materials investigated were Macor and Boron nitride and the machining operation was a continuous operation (turning). The objectives of this investigation were to generate …

    dcu Download PDF for Machinability studies of machinable glass-ceramic materials: macor and boron nitride (opens in a new tab)

  4. TOPOLOGY OPTIMIZATION OF 3D WOVEN MICROLATTICES, ADDITIVELY MANUFACTURED ARCHITECTED MATERIALS, AND MACHINABLE COMPONENTS

    Topology optimization is a powerful design tool, driven by computational mechanics and mathematical programming. It has been demonstrated to create innovative and high performance designs from engineering structures to architected materials. Architected materials have been designed with topology …

    jhu Repository record for TOPOLOGY OPTIMIZATION OF 3D WOVEN MICROLATTICES, ADDITIVELY MANUFACTURED ARCHITECTED MATERIALS, AND MACHINABLE COMPONENTS (opens in a new tab)

  5. Effect of Etch Time on SBS of Machinable Lithium Disilicate Glass Ceramics Using Variolink Esthetic LC

    … between dental cement and four different machinable, lithium disilicate glass ceramics, under varied etch time with hydrofluoric acid. Ten specimens each of 4 different machinable blocks of lithium disilicate were mounted in cylinders of pink acrylic resin. Each specimen was subjected to …

    uab Repository record for Effect of Etch Time on SBS of Machinable Lithium Disilicate Glass Ceramics Using Variolink Esthetic LC (opens in a new tab)

  6. Evaluation of the mechanical and the physical properties for resin 3D printed material and machinable composite

    … of various 3D-printed resin materials and a machinable hybrid resin. MATERIALS AND METHODS: Eight 3D printing resin materials were selected for evaluation: Pac-Dent Rodin Sculpture 2.0 (RS), Pac-Dent Rodin Titan (RT), BEGO VarseoSmile Crown Plus (BVS), Desktop Health Flexcera Smile Ultra Plus …

    bu Repository record for Evaluation of the mechanical and the physical properties for resin 3D printed material and machinable composite (opens in a new tab) Embargoed until 2026-11-26

  7. A graph grammar based approach to automated manufacturing planning

    … to be machined in one operation or to be non-machinable. Then the decomposed part is converted into a graph so that graph grammar rules can determine the machining details. A candidate plan is a feasible sequence of all of the necessary machining operations needed to manufacture this part. If …

    texas Repository record for A graph grammar based approach to automated manufacturing planning (opens in a new tab)

  8. Interaction between enamel, porcelain and a gold alloy: an in vitro wear study.

    … pressable ceramic (LR-pressable ceramic). - a machinable ceramic. - a type III gold alloy (gold). The aims of the study were to determine the wear rates of the selected porcelains and opposing enamel under controlled conditions which simulated two clinical conditions: - heavy attrition at near …

    adelaide Repository record for Interaction between enamel, porcelain and a gold alloy: an in vitro wear study. (opens in a new tab)

  9. Design of Face-Milled Spiral Bevel Gear Drives with the Desired Conditions of Meshing and Contact by application of the Universal Motion Concept

    … Then, the machine-tool settings for the closest machinable pinion tooth surfaces have to be found in the first step, and with them the coefficients for the ap- plication of the Universal Motion Concept (UMC) has to be found in a second step. These steps will be based on the formulation of a …

    rit Repository record for Design of Face-Milled Spiral Bevel Gear Drives with the Desired Conditions of Meshing and Contact by application of the Universal Motion Concept (opens in a new tab)

  10. Tribology Of Novel Multifunctional MAX Phase Composites

    … resistant, creep resistant, lubricious, readily machinable, may possess Vickers hardness values of 2-8 GPa, and are anomalously soft for transition metal carbides and nitrides. Because of these properties, there is a huge potential for MAX phase's to improve tribological properties when used in …

    nodak Repository record for Tribology Of Novel Multifunctional MAX Phase Composites (opens in a new tab)

  11. Development of double-positive metamaterial composites for antenna volume reduction

    … was conducted into the engineering of fully machinable advanced double-positive metamaterials for use in reducing the wavelength of electro magnetic waves within high power antennas while also matching the wave impedance of the antenna to free space. A magneto-dielectric metamaterial …

    missouri Repository record for Development of double-positive metamaterial composites for antenna volume reduction (opens in a new tab)

  12. On the mechanism of tool crater wear in titanium alloy machining

    … at higher production rates and develop more machinable alloys (e.g. TIMETAL® 54M, TMETAL® 407) without compromising titanium’s excellent mechanical properties. Increasing the tool life by a factor of minutes can have a dramatic effect on machining cost. Unlike steels, the same tool grade is …

    whiterose Download PDF for On the mechanism of tool crater wear in titanium alloy machining (opens in a new tab)

  13. Development of novel micaceous glass ceramics for dental applications using CAD/CAM Systems

    … of this project was to develop and characterise machinable glass-ceramic materials for dental applications with the final outcome of producing a range of materials matching tooth enamel for aesthetics and mechanical properties. The candidate glass is a micaceous glass-ceramic which is …

    whiterose Download PDF for Development of novel micaceous glass ceramics for dental applications using CAD/CAM Systems (opens in a new tab)

  14. Stress corrosion cracking of rotor steels in carbonate/bicarbonate and sodium hydroxide solutions

    … experiments were compared. A new, easily machinable, specimen geometry for fracture mechanics experiments was tested. The influence of pH, potential, microstructure and inclusions were studied. Stress corrosion cracking (SCC) was found with all three steels in the 3.5M NaOH solution at …

    ubc Repository record for Stress corrosion cracking of rotor steels in carbonate/bicarbonate and sodium hydroxide solutions (opens in a new tab) Download PDF for Stress corrosion cracking of rotor steels in carbonate/bicarbonate and sodium hydroxide solutions (opens in a new tab)

  15. Development Of Novel Max Phase Composites

    … resistant to creep, lubricious, readily machinable, and has Vickers hardness values of 2-8 GPa which is anomalously soft for transitional metal carbides and nitrides. Some of the MAX phases are also oxidation resistant. The properties of the MAX phases make them very appealing to …

    nodak Repository record for Development Of Novel Max Phase Composites (opens in a new tab)

  16. Crystallisation in fluorapatite-fluorphlogopite glass ceramics

    … of mica results in a material that is highly machinable, andprovided that a suitable interlocking microstructure can be produced, thestrength will be increased.The aim of this work is to investigate how altering the heat treatment affects thecrystallisation and the final mechanical properties …

    salford Download PDF for Crystallisation in fluorapatite-fluorphlogopite glass ceramics (opens in a new tab)

  17. Evaluation and Development of an In-vivo Bone Densitometer

    … material has been made which is homogeneous, machinable and has attenuation coefficients similar to a real compact bone. It serves to calibrate the output signals in scanning measurements. An optical transform system has been designed to give a linear area representation of the quantity of …

    aston Download PDF for Evaluation and Development of an In-vivo Bone Densitometer (opens in a new tab)

  18. Design and Construction of a Scanning Tunneling Microscope for Atomic Scale Imaging of Surfaces in Ultra-High Vacuum

    … microscope is constructed from Macor, which is a machinable ceramic. Macor is ultra-high vacuum compatible and has a high strength to weight ratio, low thermal expansion coefficient, and low thermal conductivity, which are all properties desirable for atomic scale imaging. The instrument is …

    texas-state Repository record for Design and Construction of a Scanning Tunneling Microscope for Atomic Scale Imaging of Surfaces in Ultra-High Vacuum (opens in a new tab)

  19. An Investigation of the Wear of Human Enamel and Dental Ceramics

    … low fusing ceramic); and Cerec Vita Mark II (machinable ceramic). Cast gold was also tested for comparison. Overall, throughout the study, a load of 40N was used with a cycle rate of 80 cycles per minute for a total of 25000 cycles. The amount of wear was determined by measuring the cusp …

    glasgow Download PDF for An Investigation of the Wear of Human Enamel and Dental Ceramics (opens in a new tab)

Page 1 of 3