Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 9 of 9 for “"Machining damage"”.

  1. Finite element analysis of machining damage in manufacturing ceramic implants

    … and brittleness of ceramics make precision machining of implants very difficult to achieve complex geometry and required surface integrity. Currently, grinding with diamond wheels is the most widely used process to machine ceramics. However, the process mechanics and damage mechanism in …

    alabama Repository record for Finite element analysis of machining damage in manufacturing ceramic implants (opens in a new tab)

  2. Analysis of machining damage to CAD/CAM block materials characterized by changes in surface roughness, edge chipping, and flexural strength

    … and 1.5mm thickness), correlate the effect of machining damage on the material strength, compare the flexural strength of bur milled versus sectioned CAD/CAM blocks and evaluate the tool wear after milling. MATERIALS AND METHODS: Five dental CAD/CAM materials were used: Lithium disilicate …

    bu Repository record for Analysis of machining damage to CAD/CAM block materials characterized by changes in surface roughness, edge chipping, and flexural strength (opens in a new tab)

  3. Understanding the effect of surface generation rates for finish milling of Ti-5Al-5Mo-5V-3Cr aero-structural components

    … have been developed to replicate complex machining strategies employed in aerospace manufacturing, to understand and develop an improved processing window. Machinability trials identifieded the influence of cutting speed (Vc), feed per tooth (fz) and surface generation rates (SGR) on …

    whiterose Download PDF for Understanding the effect of surface generation rates for finish milling of Ti-5Al-5Mo-5V-3Cr aero-structural components (opens in a new tab)

  4. Machinability of high-strength dental polymers and their performance as framework materials for all-on-four prostheses

    … in PEEK. PEEK exhibited a ductile response to machining damage, while TR showed a more brittle response. Chipping factor of PEEK was higher than TR eightfold, meaning TR showed an improved marginal integrity at 0.5 mm. Both materials showed concerning signs of machining damage with the milling …

    bu Repository record for Machinability of high-strength dental polymers and their performance as framework materials for all-on-four prostheses (opens in a new tab)

  5. In-situ Micro and Nanomechanical Characterization and Ultrasonic Machining of Zirconia Ceramics

    … are conducted using dental CAD/CAM diamond machining processes involving micro and nanoscale diamond tools and material contacts, resulting in severe machining-induced damage. Addressing these matters requires a fundamental understanding of the influence of the ceramics distinct …

    adelaide Repository record for In-situ Micro and Nanomechanical Characterization and Ultrasonic Machining of Zirconia Ceramics (opens in a new tab)

  6. Edge Trimming of CFRP- Surface Roughness Measurement and Prediction

    … a need for finishing operations by conventional machining in the manufacturing of composite parts. Composites have a very different machinability to metals and can suffer from a number of surface defects during machining. The fibres are also highly abrasive and can cause rapid tool wear which in …

    whiterose Download PDF for Edge Trimming of CFRP- Surface Roughness Measurement and Prediction (opens in a new tab)

  7. Machinability of ceramic blanks for dental CAD/CAM restorations

    … The other objective focused on evaluating the damage of various CAD/CAM materials arising from machine type, CAM setup, machining parameters, and tool quality. MATERIALS & METHODS: The tested materials were VITA Mark II (feldspathic block), Ivoclar e.max CAD (un-crystallized lithium …

    bu Repository record for Machinability of ceramic blanks for dental CAD/CAM restorations (opens in a new tab)

  8. Solution to Certain Problems in the Failure of Composite Structures

    … is shown to be related to the fabrication machining speed suggesting machining damage as a mechanism for the hole-size dependence of the flaw density.</p> <p>The strength prediction methodology based on the distribution of intrinsic flaw lengths and flaw density and an examination of the …

    purdue-thes Repository record for Solution to Certain Problems in the Failure of Composite Structures (opens in a new tab)

  9. Hole making performance and damage mechanisms of carbon fibre reinforced polyetherketoneketone (CF/PEKK)

    … To date, the hole making performance and damage mechanisms of CFRTPs, particularly CF/PEKK, remain a significant but understudied area. <br/><br/>In this work, the hole making performance of CF/PEKK has been investigated for the first time. The impact of different hole making conditions …

    qu-belfast Repository record for Hole making performance and damage mechanisms of carbon fibre reinforced polyetherketoneketone (CF/PEKK) (opens in a new tab) Download PDF for Hole making performance and damage mechanisms of carbon fibre reinforced polyetherketoneketone (CF/PEKK) (opens in a new tab)