Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 41 for “"Machining forces"”.
-
Estimating machining forces from vibration measurements
… The topic of force reconstruction of the cutting forces during a machining process like turning or milling machines is a recent line of research to suffice the requirement of proactive monitoring of forces generated during the operation of the machine tool. The forces causing vibrations while …
-
Control and measurement of clamping and machining forces in intelligent fixturing
… iterative procedure so that control of clamping forces can be realised outside a laboratory environment.
-
Application of a Fabry-Perot interferometer for measuring machining forces in turning operations
… found to be feasible for detecting changes in machining forces. The fiber optic sensor was able to detect increases in strain corresponding to force increases detected by a dynamometer. The FP interferometer system must progress in several ways. A better data acquisition and data analysis …
-
Investigation of machining forces during constant velocity drilling in SACE : (spark assisted chemical engraving) technology
… ) is anon conventional technology used for micro machining and drilling in non-conductive materials like glass, quartz and ceramics. The drilling can be done by penetrating the tool in work-piece. The penetrating strategies could be gravity feed drilling, constant velocity drilling and feedback …
-
Microstructure -Level Machining Modeling of Ferrous Alloys
The microstructure-level model was validated on machining of ductile iron and two of its constituents: pearlite and ferrite. Orthogonal cutting experiments and simulations were conducted of the three materials. The measured chip morphology and machining forces were compared with the model …
-
Machinability of bainitic steels
… properties can present challenges during machining operations. Thus, the aim of this thesis is to explore the machinability of bainitic steels and compare it with that of the currently adopted pearlitic-ferritic steels. Both materials were characterized in detail, focusing on …
-
Analysis of orthogonal edge trimming of uni-directional composites: numerical, analytical, and experimental approach
… the machined surface and unknown status of the machining forces. Knowing the status of forces during the final machining process helps reduce such defects as delamination and fiber-matrix debonding. This research attempted to develop a fully theoretical model for edge trimming of composites for …
-
Design and Analysis of a Compact, Economical, Multi-axis, Multi-tasking, Small Part Machine Tool
… features, manufacturers must often resort to machining. Machining smaller parts, however, can be particularly challenging. In this thesis, the issues associated with machining small parts are examined and a brief overview of the equipment available to machine small parts is considered. A …
-
Static and Dynamic Cutting Model Based on Mechanistic Model
Prediction of machining forces involved in complex geometry can be valuable information for machine shops. This study presents a mechanistic cutting force simulation model for ball end milling processes, using ray casting and voxel representation methods used in 3D computer graphics field. Using …
-
Advanced Finite Element Strategies for Machining of Long Fibre Reinforced Polymer Composites
… thesis addresses a novel finite element study in machining of long-fibre-reinforced polymers (LFRP). For this sake, the development of sophisticated Fortran VUMAT user-subroutines is performed to insert a new composite damage algorithm in the modelling of composite machining, which accounts for …
-
Modelling forces in milling screw rotors
The deflections of screw rotors under machining forces cause mismatch between the male and female rotors and, consequently, accelerated wear and suboptimal efficiency in their performance. Optimizing the machining process to minimize the generated forces and accounting for the resulting mismatch in …
-
Pilot Study for Cutting Force Model of Robotic Deburring
The knowledge of machining forces in robotic machining is of critical importance to ensure the accuracy and stability of the tool-workpiece interaction. To that end, this thesis presents a method for applying conventional mechanistic milling models to the prediction of cutting forces generated …
-
EFFECT OF FIXTURE DYNAMICS ON THE FACE MILLING PROCESS
<p>Accurate prediction of dynamic machining forces is essential in order to estimate the product and process quality, tool life and stability of the machining process. To achieve such a goal, all the aspects affecting the machining process dynamics should be considered. An integrated dynamic model …
-
Analysis and modeling of machining and surface integrity characteristics under various turning environments
… roughness and residual stresses are dependent on machining characteristics including cutting temperature and machining forces in machining operations. Cutting fluids as coolant and/or lubrication can be utilized to affect the machining characteristics and possibly improve the part quality of …
-
Experimental Study of Micro-/ Nano-Scale Cutting of Aluminum 7075 and P20 Mold Steel
… micro-manufacturing, especially micro-mechanical machining, has been devoted to building miniature machine tools with nanometer positioning resolution and sub-micron accuracy. There is lack of fundamental understanding of mechanical machining at the micro and nano scale. Specifically, basic …
-
Development of the Analysis and Optimization Strategies for Prediction of Residual Stresses Induced by Turning Processes
… and high resistance to fatigue and corrosion. Machining these materials is accompanied by high cutting temperatures and forces, which cause high residual stresses. It is known that high temperature leads to inaccuracies in component dimensions and causes phase transformation in the material. …
-
The design and development of a Spark Assisted Chemical Engraving system with force feedback control
… Assisted Chemical Engraving is a hybrid micromachining method capable of machining micro-holes and micro-channels on non-conductive substrates. This thesis centers around the design of a mechatronics system for precision manufacturing using SACE technology. The setup consists of a machining …
-
Quantitative methods for inferring process-structure-property relations in machining
Metal machining subjects material to large strains (e > 1) at extremely high rates (rate > 1000 s-1) while simultaneously imposing heating due to dissipated plastic work. This complex thermomechanical loading drives microstructure evolution and consequently property evolution. Oxygen Free High …
-
Robotic machining evaluation of the positioning accuracy and the machined surface quality
… However, the surface quality of the robotic machining operations has not been sufficiently investigated. Indeed, the relative works are restricted to the finishing operations such as grinding and deburring. In this work, the surface quality of the slot milling operation which is executed by …
-
Modelling and compensation of positioning errors in robotic machining systems
… have gained significant attraction for aerospace machining (material removal) as well. Compared to conventional CNC machine tools, robots have higher versatility and a lower cost. However, robotic arms suffer from low structural stiffness, which leads to deflection errors under machining loads, as …
Page 1 of 3