Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 59 for “"Machining performance"”.

  1. Material Characterization and Machining Performance of Nodular Cast Iron

    … degree project was to investigate material and machining variations in nodular cast iron similar to EN-GJS-500-14, both between components from the same batch and within individual components. The aim was to examine the microstructure and properties of the material, as well as analyze the …

    chalmers Repository record for Material Characterization and Machining Performance of Nodular Cast Iron (opens in a new tab)

  2. Workpiece -Fixture Frictional Contact and Its Influence on Machining Performance

    … dynamic model, it is possible to predict machining process stability by taking the workpiece-fixture interaction into account. Results from machining process stability showed that the machining stability is strongly influenced by the frictional contact and the incorporation of its …

    uiuc Repository record for Workpiece -Fixture Frictional Contact and Its Influence on Machining Performance (opens in a new tab)

  3. On the Modeling and Analysis of Machining Performance in Microendmilling

    The surface generation process in the micro-endmilling of both single phase and multi-phase workpiece materials was also examined. 508 micron diameter endmills with edge radii of 2 and 5 microns were used to machine slots in ferrite, pearlite and two ductile iron materials at feedrates ranging from …

    uiuc Repository record for On the Modeling and Analysis of Machining Performance in Microendmilling (opens in a new tab)

  4. An investigation of the machining performance and mechanisms with rake face textured cutting tools

    … textured cutting tools to improve the cutting performance is reported. It is shown that cutting tool surface texture is a promising technology to reduce the friction at the tool-chip and tool-work interfaces and cutting tool wear in machining. However, a comprehensive investigation is …

    unsw Repository record for An investigation of the machining performance and mechanisms with rake face textured cutting tools (opens in a new tab)

  5. The importance of Ag content for optimizing the machining performance of Ti-Si-(Ag)-N coating

    … mecânico, térmico e tribológico. A sua performance numa operação de maquinagem foi também estudada de forma a determinar a potencial aplicação destes revestimentos em ferramentas de corte para maquinar a liga aerospacial TiAl6V4, considerada “difícil de maquinar”. A matriz de TiSiN foi …

    minho-thes Repository record for The importance of Ag content for optimizing the machining performance of Ti-Si-(Ag)-N coating (opens in a new tab)

  6. Investigating the influence of film formation on the machining performance in an atomization-based cutting fluid spray system

    … temperatures and production of thin chips during machining. Heat generated in the tool-chip contact region is not readily dissipated, leading to a shortened tool life. Various cooling methods have been studied for titanium machining including high pressure coolant application, minimum quantity …

    uiuc Repository record for Investigating the influence of film formation on the machining performance in an atomization-based cutting fluid spray system (opens in a new tab)

  7. The impact of multilayer periodicity on texture, morphology, chemical stability and machining performance of titanium aluminum nitride/chromium nitride thin films

    … in ISO standard wear vs. cutting time format. Machining results were connected back to the previously identified changes in structure.All films exhibited a rocksalt B1-type structure with a columnar morphology and lateral coarsening during film growth; which was more pronounced in the …

    unh-thes Repository record for The impact of multilayer periodicity on texture, morphology, chemical stability and machining performance of titanium aluminum nitride/chromium nitride thin films (opens in a new tab)

  8. MODEL BASED CONTROL OF MACHINING PROCESSES: EXPLORATION OF BAYESIAN STATISTICAL METHODS FOR IDENTIFICATION AND CONTROL

    Machining process modeling & simulation as well as in-process monitoring and control have been identified as key technological factors to power efficient manufacturing facilities of tomorrow. The effective utilization of process models and in-process control are aimed towards improving …

    clemson Repository record for MODEL BASED CONTROL OF MACHINING PROCESSES: EXPLORATION OF BAYESIAN STATISTICAL METHODS FOR IDENTIFICATION AND CONTROL (opens in a new tab)

  9. Momentum wheel stabilization for robotic machining

    … alternative to conventional CNC machines for machining large components, but their low dynamic stiffness can lead to severe vibration and poor machining performance. This thesis investigates the use of momentum wheels to mitigate this harmful vibration. The interaction between structural …

    ubc Repository record for Momentum wheel stabilization for robotic machining (opens in a new tab) Download PDF for Momentum wheel stabilization for robotic machining (opens in a new tab)

  10. Interface Engineered Diamond Coatings for Dry Machining Applications

    … the final diamond adhesion and the resulting machining performance of the tool under real manufacturing conditions is still unexplored. CVD diamond film's extraordinary qualities bring little benefit if the film fails to adhere sufficiently to the substrate. Inadequate adhesion undermines tool …

    usf Repository record for Interface Engineered Diamond Coatings for Dry Machining Applications (opens in a new tab)

  11. A new tooling system with the function of on-line adjustable tool inclination angle in turning operations

    … inclination angles, has significant effects on machining performance, including cutting forces, chip formation, tool life, tool wear, etc. This thesis describes details of designing a new tooling mechanism with on-line adjustable cutting edge inclination angle. The mechanism is based on three …

    iastate Repository record for A new tooling system with the function of on-line adjustable tool inclination angle in turning operations (opens in a new tab)

  12. Dynamic Modeling and Dynamic Analysis of the Boring Machining System

    … it susceptible to self-excited chatter during machining. The main focus of this thesis is directed at developing a system model which correctly describes the boring operation, applying modern control theory to perform dynamic cutting analysis, and exploring a systematic approach to evaluate the …

    uiuc Repository record for Dynamic Modeling and Dynamic Analysis of the Boring Machining System (opens in a new tab)

  13. Investigating the effects of AC voltage signals on micro-channels machined with the Spark Assisted Chemical Engraving process

    … The process relies on multiple parameters for machining, but its stochastic nature often reduces the predictability of machining outcomes. While prior work has studied various individual parameters, the influence of voltage waveforms has been largely neglected. This study filled that gap by …

    uoit Repository record for Investigating the effects of AC voltage signals on micro-channels machined with the Spark Assisted Chemical Engraving process (opens in a new tab)

  14. Geometrical quality prediction of machining process by parallel kinematic machines through deformation modelling and error compensation

    … flexibility, stiffness, accuracy, and dynamic performance over traditional machine tools. While they bring advantages for high-speed, high-precision aerospace, automotive, and medical manufacturing applications, PKMs face adoption barriers due to their nonlinear kinematics, complex stiffness …

    qu-belfast Repository record for Geometrical quality prediction of machining process by parallel kinematic machines through deformation modelling and error compensation (opens in a new tab) Download PDF for Geometrical quality prediction of machining process by parallel kinematic machines through deformation modelling and error compensation (opens in a new tab)

  15. Development of Hard PVD Coating Systems for Machining Austenitic Stainless Steels

    … lattice with various x amount during high-speed machining of austenitic stainless steels. The results showed that higher up to a certain point, thermal stability, mechanical properties, machining performance of the coating improved. Above this point, a drop in properties was observed associated …

    mcmaster Repository record for Development of Hard PVD Coating Systems for Machining Austenitic Stainless Steels (opens in a new tab)

  16. Electrical Discharge Texturing of Cutting Tools

    … on the novel application of electrical discharge machining (EDM) to obtain the desired texture, with a view to facilitating lubricant penetration and retention. A significant enhancement in machining performance consequent to such tool face texturing is demonstrated. The functionality of such …

    mcmaster Repository record for Electrical Discharge Texturing of Cutting Tools (opens in a new tab)

  17. Effect of crystallographic orientation on wear of diamond tools in nanoscale ductile cutting of silicon

    … diamond crystallographic orientations on machining performance are investigated during nanoscale ductile cutting of silicon. Experimental results show that in nanoscale ductile cutting of silicon, traditional gradual flank wear along the effective cutting edge of tools are predominant. The …

    nus Repository record for Effect of crystallographic orientation on wear of diamond tools in nanoscale ductile cutting of silicon (opens in a new tab) Download file for Effect of crystallographic orientation on wear of diamond tools in nanoscale ductile cutting of silicon (opens in a new tab)

  18. Digital model of shell face milling mechanics and dynamics

    … are widely used in the industry for various machining applications for their efficiency in achieving a high material removal rate and superior surface finish. Particularly, larger diameter shell face mills with a high number of teeth can remove excess material from workpiece surfaces in a …

    ubc Repository record for Digital model of shell face milling mechanics and dynamics (opens in a new tab) Download PDF for Digital model of shell face milling mechanics and dynamics (opens in a new tab)

Page 1 of 3