Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 24 for “"Macor"”.
-
Machinability studies of machinable glass-ceramic materials: macor and boron nitride
… dry conditions. The materials investigated were Macor and Boron nitride and the machining operation was a continuous operation (turning). The objectives of this investigation were to generate reliable machining data in terms of surface finish, tool life and cutting force in relation to cutting …
-
Acoustic emission, internal friction and Young's modulus in a mechanically fatigued GFRP composite and MACOR, a glass-ceramic composite
Thesis (M.S.)--Michigan State University. Department of Metallurgy, Mechanics and Materials Science, 1991
-
Use of a Synthetic Substrate for Orthodontic Bond Strength Testing
… this study was to investigate the suitability of Macor as a substrate for bond strength testing of orthodontic adhesives. Macor samples were custom prepared in a shape similar to that of a human maxillary premolar. The groups tested were: Group 1: acid-etched with 9.6% hydrofluoric acid (HFA) for …
-
Ant Colony Optimisation for Multi-Uncrewed Ground Vehicle Mission Planning
… Colony Optimisation (ACOR), namely ACOPAR and MACOR respectively. ACOPAR is designed specifically for multi-UGV path planning by 1) designing a probability-based random-walk strategy to balance exploration and exploitation; and 2) proposing an adaptive waypoints-repair method for improving …
-
Floating head skin friction gage measurements in supersonic flows
… gage made of a machinable ceramic called Macor was then designed to increase the resonant natural frequency (3600 Hz) and the insulating properties of the gage. Consequently, the Macor model floating head design is capable of measuring the skin friction coefficient in short duration, high …
-
Development of a micro-FID using a diffusion flame
… tested in an encapsulated structure of Quartz-Macor®-Quartz layers. Diffusion flames are generally known to be more controllable and stable than premixed flames, which fits our purpose for the micro-FID, where the stability plays an important role for many applications. Various Macor designs …
-
Design and Construction of a Scanning Tunneling Microscope for Atomic Scale Imaging of Surfaces in Ultra-High Vacuum
… tunneling microscope is constructed from Macor, which is a machinable ceramic. Macor is ultra-high vacuum compatible and has a high strength to weight ratio, low thermal expansion coefficient, and low thermal conductivity, which are all properties desirable for atomic scale imaging. The …
-
Geometry and Material Effects on Electron Transport in Hop Funnels
… hop funnel. Funnels have been constructed out of MACOR and alumina each with three different funnel angles. The current to voltage characteristic of these funnels and the energy of electrons transmitted through the funnel have been measured. In addition to the experimental work, this thesis …
-
Probe measurements of the magnetic field structure of fast wave toroidal eigenmodes
… less than rods made of quartz, alumina, and Macor, for example. Differential magnetic loop probes, protected by boron nitride sheaths, were then constructed and used to make radial scans of bz(r), bθ(r), their phases for the fast Alfvén wave. Analysis of the scans indicate the presence of …
-
Flash X-ray Tomography of Kolsky Bar Experiments
… experiments on two types of machinable ceramics (Macor and Mykroy/Mycalex 550) and uniaxial compression on 3D printed sandstone around 100/s were conducted. For indentation experiments, the post-peak-force reconstructions show that the Macor specimen fractures due to two major cracks - one …
-
Low pressure and plasma enhanced chemical vapor deposition of molybdenum oxide films
… kHz radio-frequency (RF) generator and using a Macor resistive heater. The process variables investigated were temperature, 250-530°C; pressure, 100-1014 mtorr; Mo(CO)[subscript]6 flow rate, 0.56-6.7 mg/min; O[subscript]2 flow rate, 5-15 sccm; H[subscript]2O flow rate of 0.0-0.53 sccm; and RF …
-
DEVELOPMENT OF GALLIUM-INDIUM ALLOYS AS NONMAGNETIC TEST MASSES FOR SPIN-DEPENDENT SHORT-RANGE FORCE EXPERIMENTS
… forces from a previous experiment using Macor ceramic and 1.02% MnCl$_2$ solution can be improved with the use of these lower magnetic susceptibility test masses.
-
OPTIMIZATION AND IMPLEMENTATION OF A THERMOACOUSTIC FLASHOVER DETECTOR
… in 2011, and featured an aluminum, copper, and MACOR tube 178 mm long and 25.4 mm in diameter. The prototype was powered by an external heat band, which provided 44 watts of power at 308 deg C. Optimization of the prototype is conducted across several parameters including power consumption and …
-
Thermal Modeling and Validation Testing of a Miniature Xenon Ion Thruster
… 300C. Sheathing the entire keeper electrode with Macor was shown to reduce the temperature by as much as 13.3C at certain times and locations. Due to its lower thermal conductivity, it was hypothesized that a thruster made of titanium would impede heat transfer to the magnets, however, the model …
-
LHC phenomenology and higher order electroweak corrections in supersymmetric models with and without R-parity
… The appendix describes the two programs MaCoR and CNNDecays being developed for the analysis carried out in this thesis. MaCoR allows for the calculation of mass matrices and couplings in the models under consideration and CNNDecays is used for the one-loop calculations of neutralino and …
-
Thermal Infrared Imaging: Instrumentation and Method Development
… characterized. It is designed from a custom-made Macor backpiece that holds an alumina screw. High resistance wire is coiled around the screw. The coiled wire is covered with an alumina coating. Most light sources have a spectral emissivity similar to that of a blackbody emitter. This source has a …
-
Elektrické výboje ve vodných a organických roztocích
… první části z keramického neporézního materiálu Macor® o tloušťce 1 mm, průměr otvoru je 0,6 mm, v druhé části je pak použita keramika ShapalTM-M o tloušťce i průměru otvoru 1 mm. Experimentální část je rozdělena do dvou hlavních oblastí. V obou částech byl jako základní elektrolyt použit NaCl, …
-
On the coordination chemistry of pentavalent (σ⁴, λ⁵) phosphorus compounds
The work described herein details the synthesis of a variety of pentavalent organophosphorus compounds and their applications as ligands to address important problems in coordination chemistry. This research encompasses two main themes: (1) the asymmetric synthesis of enantiopure …
-
An Inverse Computational Approach for the Identification of the Parameters of the Constitutive Model for Damaged Ceramics Subjected to Impact Loading
… and its patterns, observed in the recovered Macor ceramics available in the literature.A method for image analysis of the photographic images of the lateral sides of the recovered specimen was proposed. It was used to quantify density of the damage in the specimen and to establish a better …
-
Convective Heat Flux Sensor Validation, Qualification and Integration in Test Articles
… mounted in ¾ in. diameter stainless steel, MACOR, and Graphite hemispheres were chosen as the test articles for this study. An inverse heat flux calculation was performed using the coaxial thermocouple temperature data for comparison with the Schmidt-Boelter gage. Before wind tunnel testing, …
Page 1 of 2