Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 76 for “"Manufacturing Design"”.

  1. Powder bed fusion metrology for additive manufacturing design guidance

    The benefits afforded by the use of additive manufacturing (AM) are diminished due to limited understanding of the various AM processes. Design for additive manufacturing (DFAM) guidelines can be generated through metrology studies using test parts to characterize specific processes and inform …

    texas Repository record for Powder bed fusion metrology for additive manufacturing design guidance (opens in a new tab)

  2. Computerized Modeling Technology of Unique Footwear Surface Manufacturing Design /

    … require new fields of research to improve manufacturing efficiency regarding unique products (those produced under special orders). Digital drawings and three-dimensional models provide most of the technical data that is needed for clear manufacturing, however, there are still some unused …

    vilnius Repository record for Computerized Modeling Technology of Unique Footwear Surface Manufacturing Design / (opens in a new tab)

  3. Thermal and Manufacturing Design of Polymer Composite Heat Exchangers

    … molding process. This dissertation presents a design methodology that integrates thermo-fluid considerations and manufacturing issues into a single design tool for thermally enhanced polymer heat exchangers. The methodology shows that the choice of optimum designs is restricted by moldability …

    maryland Repository record for Thermal and Manufacturing Design of Polymer Composite Heat Exchangers (opens in a new tab)

  4. Manufacturing Design and Fabrication of 100 nm (Leff) CMOS Devices

    … that have been fabricated at RIT. The process is designed with Lpoly = 0.15 µm on 150 mm (6") Silicon wafers. The NMOS and PMOS transistors are designed to operate at 1.2 V supply voltage and exhibit 0.3 V threshold voltage. 30 Å silicon-dioxide gate dielectric with Nitrous Oxide (N2O), was found …

    rit Repository record for Manufacturing Design and Fabrication of 100 nm (Leff) CMOS Devices (opens in a new tab)

  5. Sample Archival System for Quantum Device Manufacturing: Design, Construction, and Integration

    In the manufacturing of quantum devices using 2-dimentional (2D) materials, current processes rely on manual operations of production. MonArk Quantum Foundry is developing a facility to semi-automatically, and ultimately automatically, produce 2D materials. One crucial step in the experimentation …

    arkansas Repository record for Sample Archival System for Quantum Device Manufacturing: Design, Construction, and Integration (opens in a new tab)

  6. Fundamentals of Machine Design and Manufacturing: Design of a Compliant Winding Machine

    … Electronics Compliant Winding Machine has been redesigned for improved performance. Thorough study of the existing machine identified issues such as the inconsistent diameter and pitch of the compliant wind, outdated equipment, as well as safety and ergonomic issues. A comprehensive methodology …

    embry-riddle Repository record for Fundamentals of Machine Design and Manufacturing: Design of a Compliant Winding Machine (opens in a new tab)

  7. SHORT-RUN STATISTICAL PROCESS CONTROL FOR REAL-TIME MANUFACTURING-DESIGN, IMPLEMENTATION AND PERFORMANCE STUDY

    The goal of this dissertation is to design and implement a real-time short-run Statistical Process Control (SPC) method in low volume manufacturing to improve the manufactured product quality. There are many ways to achieve quality improvement. SPC is one of them which can be applied to any area …

    nus Repository record for SHORT-RUN STATISTICAL PROCESS CONTROL FOR REAL-TIME MANUFACTURING-DESIGN, IMPLEMENTATION AND PERFORMANCE STUDY (opens in a new tab) Download file for SHORT-RUN STATISTICAL PROCESS CONTROL FOR REAL-TIME MANUFACTURING-DESIGN, IMPLEMENTATION AND PERFORMANCE STUDY (opens in a new tab)

  8. Contribution of celluar manufacturing design to the reduction of production lead time utilizing simulation modeling

    … behind the rising emphasis on embracing Cellular Manufacturing Systems and their methods in effort to shorten the product lead time. One such method is Lean Production Systems (LPS) which are JIT based production systems that consist of manufacturing cells as their building blocks. The research in …

    ut-knoxville Repository record for Contribution of celluar manufacturing design to the reduction of production lead time utilizing simulation modeling (opens in a new tab)

  9. Ultrasonic analysis: a key driver in manufacturing design cost optimisation for high pressure turbine discs

    … of forged parts strongly influence the manufacturing design. These constraints have traditionally been ignored during preliminary design analysis due to the unavailability of suitable models. Cost reduction objectives are also commonly simplified using mass as a direct surrogate. These …

    soton Download PDF for Ultrasonic analysis: a key driver in manufacturing design cost optimisation for high pressure turbine discs (opens in a new tab)

  10. Designing for Sustainable Bicycle Manufacturing

    … in their surroundings. In this project, a design has been developed that focuses on reducing the resources needed to produce a standard bicycle. Focused on developing a sustainable manufacturing design by utilizing additive manufacturing technologies and generative design, we not only aim …

    rit Repository record for Designing for Sustainable Bicycle Manufacturing (opens in a new tab)

  11. An Investigation on In-Process SPC Sampling Frequency for Shaft Bearing Turning Process

    … production and flexible scheduling as cellular manufacturing design. To ensure the quality of machining products, control charts for Statistical Process Control (SPC) has been implemented in the company to monitor the machining process. Sampling is an essential part of data collection for SPC …

    northern-iowa Repository record for An Investigation on In-Process SPC Sampling Frequency for Shaft Bearing Turning Process (opens in a new tab)

  12. Combined structural and manufacturing optimization of stiffened composite panels

    Manufacturing considerations have been incorporated into the design optimization of a blade-stiffened composite panel. For the manufacturing analysis, a one-dimensional resin film infusion model is developed to compute the infiltration time of the resin into a fabric preform of the panel. Results …

    vt Repository record for Combined structural and manufacturing optimization of stiffened composite panels (opens in a new tab)

  13. GAMINIŲ KONSTRAVIMO IR TECHNOLOGINIO PROJEKTAVIMO METODAI VIENALAIKĖJE INŽINERIJOJE /

    … is very relevant to today's competitive manufacturing environment, overcrowding, and every for-profit production company is making every effort to produce the best quality product at minimal cost. To this end, it is necessary to constantly and continuously improve product design and …

    vilnius Repository record for GAMINIŲ KONSTRAVIMO IR TECHNOLOGINIO PROJEKTAVIMO METODAI VIENALAIKĖJE INŽINERIJOJE / (opens in a new tab)

  14. IDENTIFYING THE OPTIMUM PROCESS PARAMETERS OF PRECISION GLASS MOLDING FOR ASPHERICAL LENSES

    … the Precision Glass Molding (PGM) Process using Manufacturing Design, Design of Experiments and Metrology (for measuring the geometry of lenses). First, a custom machine is designed and manufactured which can carry out Precision Glass Lens Molding Experiments. This machine is then modified to …

    clemson Repository record for IDENTIFYING THE OPTIMUM PROCESS PARAMETERS OF PRECISION GLASS MOLDING FOR ASPHERICAL LENSES (opens in a new tab)

  15. Single-step production of non-assembly mechanisms using additive manufacturing

    Non-assembly additive manufacturing is a manufacturing process that eliminates the need for assembly and joining, effectively saving time, costs, and processing whilst making it possible to create complex geometries. There are possible future applications for non-assembly mechanisms in several …

    chalmers Repository record for Single-step production of non-assembly mechanisms using additive manufacturing (opens in a new tab)

  16. Photo-densitometry: radiograph digitization and algorithmic enhancement of x-ray images

    … and composition is an integral part of the manufacturing design flow. It is possible to evaluate these properties by both destructive and non-destructive means. Non-destructive evaluation of materials is attractive for obvious reasons and x-ray NDE (Non-Destructive Evaluation) is a well …

    iastate Repository record for Photo-densitometry: radiograph digitization and algorithmic enhancement of x-ray images (opens in a new tab)

  17. Evaluation of Pixel-scale Tunable Fabry-Perot Filters for Optical Imaging

    … array of individually tunable FPIs have been designed to operate across the visible light spec-trum from 400-750 nm. This design can give rise to a new line of compact spectrometers with fewer moving parts and the ability to perform customizable filtering schemes at the hardware level. The …

    rit Repository record for Evaluation of Pixel-scale Tunable Fabry-Perot Filters for Optical Imaging (opens in a new tab)

  18. Digital Twins in Advanced Manufacturing to Enhance Manufacturing Efficiency

    Digital Twins of manufacturing systems are an emerging tool for improvement, optimization, and monitoring of physical manufacturing systems. The idea of representing physical systems with digital depictions has been prevalent since the early days of Computer Aided Design (CAD), but recently the …

    south-carolina Repository record for Digital Twins in Advanced Manufacturing to Enhance Manufacturing Efficiency (opens in a new tab)

  19. Quantifying the costs and benefits of product variety on key performance measures-a simulation study.

    … model of the production operations of a typical manufacturing company, and study the effect of changing product variety on these operations. This is done by determining the variation in the key performance indicators (KPIs) such as product cycle time, work-in-process (WIP) and resource …

    louisville Repository record for Quantifying the costs and benefits of product variety on key performance measures-a simulation study. (opens in a new tab)

Page 1 of 4