Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 39 for “"Manufacturing test"”.

  1. Investigation into voltage and process variation-aware manufacturing test

    … complexity in IC design provides challenges for manufacturing testing. This thesis studies how process and supply voltage variation influence defect behaviour to determine the impact on manufacturing test cost and quality. The focus is on logic testing of static CMOS designs with respect to two …

    soton Download PDF for Investigation into voltage and process variation-aware manufacturing test (opens in a new tab)

  2. Development of a final manufacturing test for a resolver position tracker

    … an electronic assembly to a customer, a means of testing must be developed to insure that the assembly is working as specified prior to shipment. At Texas Instruments's (TI) Industrial System Division, electronic assemblies are tested on a Final Test Station to verify the functionality of the …

    ut-knoxville Repository record for Development of a final manufacturing test for a resolver position tracker (opens in a new tab)

  3. Methods of Processing Kenaf Chopped Strand Mats for Manufacturing Test Specimens and Composite Structures

    … researchers to make consistent samples for testing while also providing a means by which a complex structure can be built. The process includes a kenaf chopped strand mat (KCSM) that is formed using paper-making techniques. The samples created and tested with the KCSM offer competitive …

    utahstate Repository record for Methods of Processing Kenaf Chopped Strand Mats for Manufacturing Test Specimens and Composite Structures (opens in a new tab)

  4. Search State Extensibility based Learning Framework for Model Checking and Test Generation

    … resource intensive design verification and manufacturing test phases in the product life-cycle of a digital system. On the contrary, time-to-market constraints require faster verification and test phases; otherwise it may result in a buggy design or a defective product. This trend in the …

    vt Repository record for Search State Extensibility based Learning Framework for Model Checking and Test Generation (opens in a new tab)

  5. A Digital Method For Phase Noise Measurement

    … a practical implementation of this technique for manufacturing test.

    washington Repository record for A Digital Method For Phase Noise Measurement (opens in a new tab)

  6. Application of Statistical Predictive Models for Field Failure and Cisco Testing Data (Big Data Source: Cisco)

    … in how field failure categories relate to manufacturing test failures to better predict the tests that should be performed on a product after a return by a customer and what tests will be failed by a product before and after a return by a customer based on what type of failure occurred in …

    calpoly Repository record for Application of Statistical Predictive Models for Field Failure and Cisco Testing Data (Big Data Source: Cisco) (opens in a new tab)

  7. Detection of Variable Retention Time in DRAM

    This thesis investigates a test method to detect the presence of Variable Retention Time (VRT) bits in manufactured DRAM. The VRT bits retention time is modeled as a 2-state random telegraph process that includes miscorrelation between test and use. The VRT defect is particularly sensitive to test …

    portland-state Repository record for Detection of Variable Retention Time in DRAM (opens in a new tab)

  8. Test and diagnosis of resistive bridges in multi-Vdd designs

    … raise a number of challenges for existing manufacturing test and diagnosis techniques, as certain defects exhibit Vdd dependent detectability. This means that to achieve 100% fault coverage, APM-enabled devices should be tested at all operating voltages using repetitive tests. Repetitive …

    soton Download PDF for Test and diagnosis of resistive bridges in multi-Vdd designs (opens in a new tab)

  9. Reliability and test of high-performance integrated circuits

    … reliable operation of such systems. Both on-line test (concurrent error detection (CED)) and off-line (manufacturing test) techniques contribute to ensuring high levels of product reliability. The first part of this thesis focuses on techniques for CED in integrated circuits. The goal is to …

    texas Repository record for Reliability and test of high-performance integrated circuits (opens in a new tab)

  10. Techniques to increase compaction of output responses with unknown (X) values

    Testing requires checking whether the output response of a circuit or system is correct or has an error. Increasingly complex system-on-chip and 3-D integrated circuits require enormous amounts of manufacturing test data. Test compression techniques are widely used to compress the amount of output …

    texas Repository record for Techniques to increase compaction of output responses with unknown (X) values (opens in a new tab)

  11. Test generation for realistic defects

    … the performance of microprocessors have made the manufacturing test of these devices a hard problem. In addition to making the detection of defects modeled by the classical fault models like the stuck-at and the transition fault model more complex, these process technologies have resulted in …

    texas Repository record for Test generation for realistic defects (opens in a new tab)

  12. Low power test pattern generation for system on chip devices

    … of the art developments in the semiconductor manufacturing processes, integrated chip design methodology, availability of thousand plus pin integrated circuit (IC) packaging options and efficient IC test techniques have contributed immensely towards the integration of entire system on a chip. …

    ttu Repository record for Low power test pattern generation for system on chip devices (opens in a new tab)

  13. Numerical study of wave run-up on semi-submersible platforms

    For designing new floating platforms, the model tests in wave tank are carried out to investigate hydrodynamic properties and other parameters during design process. However, even though these experiments are able to help researchers with understanding the physical meaning directly, it has …

    strathclyde Repository record for Numerical study of wave run-up on semi-submersible platforms (opens in a new tab)

  14. Workflows For X-ray And Neutron Interferometry/Tomography As Applied To Additive Manufacturing

    … for non-destructive evaluation of additive manufacturing test articles. An application requiring an efficient workflow is extremely necessary for stress and fatigue testing samples. At present, scientific workflows play an important role for computational experiments in additive manufacturing 3D …

    lsu-thes Repository record for Workflows For X-ray And Neutron Interferometry/Tomography As Applied To Additive Manufacturing (opens in a new tab)

  15. Development of virtual and augmented reality environment for manufacturing

    … for the support of human-based processes in manufacturing. Virtual and augmented reality technologies can significantly reduce the development time and cost of products and processes in manufacturing. However there is currently a big gap between the conventional CAD-based processes and the …

    greece Repository record for Development of virtual and augmented reality environment for manufacturing (opens in a new tab)

  16. A Structural Analysis of On-Line Fault Detection Mechanisms in Network-On-Chip Architectures

    … a fault in an NoC system is to apply periodic test using built-in self-test (BIST) circuitry during system idle periods. This approach has the advantage that it is a structural test, so can quickly achieve high fault coverage. A second advantage is that the BIST infrastructure can be used …

    tamu Repository record for A Structural Analysis of On-Line Fault Detection Mechanisms in Network-On-Chip Architectures (opens in a new tab)

  17. Enabling low cost test and tuning of difficult-to-measure device specifications: application to DC-DC converters and high speed devices

    Low-cost test and tuning methods for difficult-to-measure specifications are presented in this research from the following perspectives: 1)"Safe" test and self-tuning for power converters: To avoid the risk of device under test (DUT) damage during conventional load/line regulation measurement on …

    gatech Repository record for Enabling low cost test and tuning of difficult-to-measure device specifications: application to DC-DC converters and high speed devices (opens in a new tab)

  18. Manufacturing system testing measurement and management process

    … will address the key question of how a test engineer measures, manages, and improves the quality of a system level manufacturing test process. The question is complicated due to the lack of clear metrics to drive improvements to the test process. It is an interesting question because of …

    texas Repository record for Manufacturing system testing measurement and management process (opens in a new tab)

  19. BIST methodology for low-cost parametric timing measurement of high-speed source synchronous interfaces

    … challenges on the semiconductor and automated test equipment (ATE) industries. The relatively slow growing ATE technology comparing to I/O speeds especially intensifies manufacturing test issues. Testing high speed I/O timing parameters requires expensive high performance test equipment with …

    texas Repository record for BIST methodology for low-cost parametric timing measurement of high-speed source synchronous interfaces (opens in a new tab)

Page 1 of 2