Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 26 for “"MapleSim"”.

  1. Modelování strojů v MapleSim

    … strojních zařízení s využitím nástroje MapleSim. Úvodní část obsahuje stručné nahlédnutí do oblasti digitálních dvojčat v průmyslu 4.0 a přístupy, kterými jsou strojní součásti modelovány. Další části práce se zabývají nástrojem MapleSim. V poslední části je realizováno vlastní digitální …

    brno-tech Repository record for Modelování strojů v MapleSim (opens in a new tab)

  2. A Mean Value Internal Combustion Engine Model in MapleSim

    … equations has recently been developed in the new MapleSim software. The model consists of three main components: the throttle body, the manifold, and the engine. The new MVEM uses combinations of causal and acausal components along with lookup tables and parametric equations. Adjusting the …

    waterloo Repository record for A Mean Value Internal Combustion Engine Model in MapleSim (opens in a new tab)

  3. A comparison of software engines for simulation of closed-loop control systems

    … It includes MATLAB-Simulink, LabVIEW, Maple-MapleSim, Scilab-Scicos, VisSim and Mathematica-Control Professional Suite (CPS). Among all of them MATLAB-Simulink is dominant and widely used software engine. The main aim of this study is to implement different state space control methods for …

    njit Repository record for A comparison of software engines for simulation of closed-loop control systems (opens in a new tab)

  4. Formulation of a Path-Following Joint for Multibody System Dynamics

    … joint is developed using the user interface of MapleSim. Starting with a planar particle joint, the theory is extended to a full 3D rigid body constraint. At each development stage, the joint is successfully validated against conventional models in both Adams and MapleSim. This formulation of …

    waterloo Repository record for Formulation of a Path-Following Joint for Multibody System Dynamics (opens in a new tab)

  5. High-fidelity Modelling of an Electric Sport Utility Vehicle

    … The high-fidelity models are developed in MapleSim and Simulink. Specifically, the high-fidelity vehicle dynamics model is developed using the MapleSim multibody and tire dynamics libraries. A simple longitudinal model is developed in Simulink to cross-validate the high-fidelity MapleSim …

    waterloo Repository record for High-fidelity Modelling of an Electric Sport Utility Vehicle (opens in a new tab)

  6. Force Control of a Unilateral Master-Slave System Using a SCARA Robot Arm

    … operation in unknown environments. In addition, MapleSim is used to find the dynamic model for the SCARA manipulator. Furthermore, MapleSim is also used to validate the control algorithm prior to implementation on the hardware. Three force control techniques are used in this research and the …

    waterloo Repository record for Force Control of a Unilateral Master-Slave System Using a SCARA Robot Arm (opens in a new tab)

  7. Design, Dynamics, and Control of Upper-Limb Exoskeleton Robots

    … built a high-fidelity skeletal shoulder model in MapleSim, to guide our exoskeleton mechanical and controller designs. It was combined with the exoskeleton model to evaluate the proposed methods. To reduce unnecessary fatigue induced by human exoskeleton misalignment, it is important to understand …

    waterloo Repository record for Design, Dynamics, and Control of Upper-Limb Exoskeleton Robots (opens in a new tab)

  8. Graph-theoretic Sensitivity Analysis of Dynamic Systems

    … is based on a commercial software package \verb MapleSim[Multibody] and can generate governing and sensitivity equations for multibody models created in MapleSim. In this thesis, the algorithm is tested on various mechanical, hydraulic, electro-chemical, multibody, and multi-domain systems. The …

    waterloo Repository record for Graph-theoretic Sensitivity Analysis of Dynamic Systems (opens in a new tab)

  9. Topology-Based Vehicle Systems Modelling

    … of SuperBlocks would be implemented within MapleSim6 to create MapleCar. This provides a customized balance between speed and accuracy after taking advantage of advanced graph-theoretic solutions methods used in MapleSim. MapleCar provides several advantages to a user over conventional …

    waterloo Repository record for Topology-Based Vehicle Systems Modelling (opens in a new tab)

  10. Modeling and Design Optimization of Plug-In Hybrid Electric Vehicle Powertrains

    … process. The model was validated against a MapleSim model. This research project successfully delivered a framework that integrates an Autonomie PHEV model and genetic algorithm optimization and can be used to address any HEV parameter optimization problem, with any objective, constraints, …

    waterloo Repository record for Modeling and Design Optimization of Plug-In Hybrid Electric Vehicle Powertrains (opens in a new tab)

  11. Vehicle Dynamic Modelling and Parameter Identification for an Autonomous Vehicle

    … dynamic model is implemented and validated in MapleSim 2017.3. The model is intended to be used for controller development and autonomous vehicle testing in a simulation environment.

    waterloo Repository record for Vehicle Dynamic Modelling and Parameter Identification for an Autonomous Vehicle (opens in a new tab)

  12. Expanding the Microfluidic Design Automation Capabilities of Manifold: Electrophoretic Cross and Time-Domain Simulation

    … to simulate designs in the time-domain in MapleSim through the use of Modelica. The Modelica design is generated automatically, creating a feedback loop that allows the designer to see their microfluidic device in operation before manufacturing a prototype. Finally, a preliminary validation …

    waterloo Repository record for Expanding the Microfluidic Design Automation Capabilities of Manifold: Electrophoretic Cross and Time-Domain Simulation (opens in a new tab)

  13. Trailer Sway Control Using an Active Hitch

    … was validated using a model constructed in MapleSim, a high-fidelity multibody simulation tool. After establishing the required performance characteristics of the active hitch, a prototype was designed, manufactured, and tested in a full scale tractor-trailer combination. The modeling …

    waterloo Repository record for Trailer Sway Control Using an Active Hitch (opens in a new tab)

  14. Symbolic Integration of Multibody System Dynamics with Finite Element Method

    … approach. The beam model is implemented in MapleSim (a multi-physics simulation environment based on symbolic computation and graph theory) and made compatible with other multibody components in its library. Example problems are shown to validate the functionality of the implemented model. …

    waterloo Repository record for Symbolic Integration of Multibody System Dynamics with Finite Element Method (opens in a new tab)

  15. Optimal Control and Multibody Dynamic Modelling of Human Musculoskeletal Systems

    … implemented in the symbolic multibody package MapleSim that uses Maple as the leverage. MapleSim generates the equations of motion governing a multibody system automatically using linear graph theory. These equations will be simplified and highly optimized for further simulations taking …

    waterloo Repository record for Optimal Control and Multibody Dynamic Modelling of Human Musculoskeletal Systems (opens in a new tab)

  16. A Hardware-in-the-Loop Test Platform for Planetary Rovers

    … library of component models was developed within MapleSim and model parameters were tuned to match the hardware on the test bench. A program was developed for real-time simulations within Labview allowing communication between hardware components and software models. This program consists of all …

    waterloo Repository record for A Hardware-in-the-Loop Test Platform for Planetary Rovers (opens in a new tab)

  17. Conversion Methods for Improving Structural Analysis of Differential-Algebraic Equation Systems

    … by simulation and modeling environments, like MapleSim, Matlab/Simulink, and those based on the Modelica language. Before a simulation starts and a numerical solution method is applied, some kind of structural analysis (SA) is performed to determine the structure and the index of a DAE system. …

    mcmaster Repository record for Conversion Methods for Improving Structural Analysis of Differential-Algebraic Equation Systems (opens in a new tab)

  18. Predictive Dynamic Simulation of Cycling Using Olympic Cyclist and Bicycle Models

    … cyclist and bicycle model was developed using MapleSim and utilized for predictive simulations of standing starts. A joint torque model was incorporated to represent musculoskeletal dynamics, including scaling based on joint angle and angular velocity to represent the muscle force-length and …

    waterloo Repository record for Predictive Dynamic Simulation of Cycling Using Olympic Cyclist and Bicycle Models (opens in a new tab)

  19. Predictive Forward Dynamic Simulation of Manual Wheelchair Propulsion

    … were generated using the multibody software MapleSim, and bounds for states and controls were determined from experimental data. Forward dynamic simulations were generated with varying initial conditions. Similar profiles and magnitudes of kinematic and kinetic data were observed between …

    waterloo Repository record for Predictive Forward Dynamic Simulation of Manual Wheelchair Propulsion (opens in a new tab)

  20. Dynamic Modeling and Parameter Identification of a Plug-in Hybrid Electric Vehicle

    … vehicle dynamics model was developed in MapleSim that utilizes acausal modeling techniques and symbolic code generation to create models that are capable of real-time simulation. Here, the motion in longitudinal direction was given importance as it is the crucial degree of freedom (DOF) …

    waterloo Repository record for Dynamic Modeling and Parameter Identification of a Plug-in Hybrid Electric Vehicle (opens in a new tab)

Page 1 of 2