Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 43 for “"Marginal fit"”.
-
Marginal fit of lithium disilicate crowns : a three-dimensional analysis
Objectives: To compare the marginal fit of lithium disilicate (LDS) crowns fabricated with digital impression and manufacturing (termed “DD”), digital impression and traditional pressed manufacturing (termed “DP”), and traditional impression and manufacturing (termed “TP”). Methods: Tooth #15 was …
-
Marginal Fit of Lithium Disilicate Crowns using Three Different Fabrication Techniques
… study was to evaluate the three-dimensional marginal fit of lithium disilicate crowns fabricated by pressed or CAD/CAM milled four- or five-axis machines. The three groups were Pressed, McX and McX5, and differed in their fabrication technique. The Pressed group was fabricated with IPS e.max …
-
A comparison of crown marginal fit fabricated using digital and conventional methods
… of this study was to determine and compare the marginal fit of crowns fabricated using digital and conventional methods. Materials and Methods. A maxillary right second bicuspid, set in a typodont (Frasaco, Greenville, N.C., USA), was prepared for a ceramic crown. The maxillary typodont was then …
-
Flexural strength and marginal fit of two types of lithium disilicate ceramics for crowns
… of 5 ceramic dental materials and to compare the marginal fit of crowns made with e.max press and a new experimental (EXP) press ceramic. MATERIALS AND METHODS: The materials tested for flexural strength included: E.max press, E.maxCAD, ENAMIC, Experimental press, and Experimental-CAD. Each group …
-
The effect of crown cementation on the marginal fit using a micro-CT measurement technique
… To study the effect of cementation on the marginal gap of lithium disilicate (LDS) crowns made with digital impression and manufacturing (DD), digital impression and traditional pressed manufacturing (DP) and traditional impression and manufacturing (TP). Methods: Ivorine typodont tooth #15 …
-
Marginal fit of CAD/CAM restorations on the basis of CBCT and their optical behavior
… to manufacture lithium disilicate crowns with a marginal fit in the range of clinical acceptance. Furthermore, the results of the present study suggest that new technologies associated with software improvements might enhance the quality of the data obtained from CBCT. Monolithic materials …
-
Marginal fit and internal adaptation of monolithic zirconia 3-unit fixed dental prostheses : in-vitro study
Objectives: To compare marginal fit and internal adaptation of monolithic zirconia (MZ) 3-unit fixed dental prostheses (FDPs) fabricated using two workflows: a full-chairside computer aided design/computer aided manufacturing (CAD/CAM) one (FCH) and a lab CAD/CAM one (LAB). Methods: Teeth #14 and …
-
CAD/CAM veneers: effect of material and thickness on color masking, bond strength and marginal fit
New CAD/CAM materials are becoming more accepted in veneer restoration. The objective is to investigate the margin integrity of CAD/CAM veneer, their color masking over dark backgrounds and shear bond strength (SBS) to resin cements. Materials and Methods: Four types of CAD/CAM materials shaded A2: …
-
Effect of Firing on the Marginal Fit of Heat-Pressed Lithium Disilicate Veneers: An in-vitro study
… in vitro study was to evaluate and compare the marginal fit of heat-pressed lithium disilicate veneers fabricated with the “staining”, or “cut-back” technique, using 3D analysis. Two groups of ten specimens were fabricated and each group differed in core thickness and the fabrication process. …
-
Effect of Different Groove Designs on Marginal Fit and Fit at Groove Region of Different Crown Materials: An In-Vitro Study
… of different groove designs on the internal fit, marginal and fit at the groove region across crown materials using 3D-analysis. A total of 120 samples were used in this study. 3 different restorative materials were evaluated: milled zirconia, pressed emax and printed resin. There were 4 …
-
The Effect of Digital Die Spacer on the Marginal Fit of Cad Pressed Lithium Disilicate Complete Coverage Copings: An SEM Assessment
… of this in vitro study was to evaluate the marginal fit of pressed IPS e.max copings fabricated from a computer-aided designed and milled PMMA acrylic resin burnout coping of various cement spacer thicknesses. Three groups of ten PMMA acrylic burnout copings were designed and milled …
-
Comparison of marginal fit of lithium disilicate crowns fabricated with CAD-CAM technology using conventional impressions and two intra-oral digital scanners.
… to conventional techniques. This study compared marginal gap size in crowns fabricated by conventional and digital impression methods. One typodont maxillary right central incisor was prepared for an all-ceramic crown. Ten impressions were made with each method: conventional using polyvinyl …
-
Evaluation of the marginal fit of single-unit, complete-coverage ceramic restorations fabricated after digital and conventional impressions: a systematic review and meta-analysis
… of digital impression systems in terms of the marginal accuracy of ceramic restorations, whereas others show that the conventional method provides restorations with better marginal fit than fully digital fabrication. Which impression method provides the lowest mean values for marginal …
-
Evaluation of distortion of monolithic zirconia crowns under the influence of different preparation designs and sintering techniques
… protocols, and how that would affect the fitting of the crown (Chapter 1). A systematic overview of how altering sintering protocol could affect the microstructure, mechanical and optical properties of zirconia material was conducted (Chapter 2). Then a systematic review of literature on …
-
Marginal Discrepancy of Components Utilized for Implant Framework Construction
<p>This study evaluated marginal fit discrepancy of the abutment-implant body interface employing various components commonly utilized for implant framework fabrication. Four types of components ( castable plastic patterns, premachined gold abutments, premachined titanium abutments and CAD-CAM …
-
In vitro comparison of marginal and internal fit of 3D printed definitive crowns and CAD CAM milled crowns
Objective: To compare the marginal fit and internal adaptation of novel additively manufactured (3D printed) ceramic filled hybrid composite definitive crowns and milled monolithic zirconia milled crowns. Materials & Methods: A single die STL file was used to create a congruent base with 6 points …
-
Self-awareness: What is it and what does it predict?
… A confirmatory factor analysis provided only a marginal fit, thus suggesting the need for more work on model specification. The link between self-awareness and the work performance measures also provided mixed results, with some significant self-awareness/work performance associations found for …
-
Effect of Different Finish Line Designs on the Marginal and Internal Fit of Metal Copings Made by Selective Laser Melting Technology
Introduction: Marginal fit has been defined as the gap between the prepared tooth and the intaglio surface of the restoration. Internal gap is the perpendicular measurement from the internal surface of the casting to the axial wall of the preparation. Selective laser melting has been used for …
-
Marginal Adaptation of CAD/CAM Hybrid Ceramic Crowns Made on Preparations With and Without Surface Finishing
… that preparation quality has an impact on marginal fit of milled restorations. However, as chair-side CAD/CAM technology improves, and newer systems and materials are released, it remains unclear if preparation quality still impacts marginal adaptation of milled restoration. Purpose: This …
-
Marginal Adaptation & Internal Fit of Digitally Designed Lithium Disilicate Crowns Manufactured by CAD/CAM and the Conventional Heat-Press Technique
… the in vitro study was to evaluate and compare marginal fit & internal fit of digitally designed lithium disilicate crowns manufactured by the computer-aided design/computer-aided manufacturing (CAD/CAM) technique and the conventional lost-wax heat-pressed technique. The method used for …
Page 1 of 3