Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 692 for “"Mass Flow Rate"”.

  1. Development of semi-empirical models to measure mass flow rate of solids in an air seeder

    … in the 1950s, it still lacks in the area of mass flow measurement of conveyed solids. An effective method of on-line seed flow monitoring is important to reduce product wastage and also, to anticipate plugging in the lines. The goal of this research has therefore been to develop methods to …

    sask Repository record for Development of semi-empirical models to measure mass flow rate of solids in an air seeder (opens in a new tab)

  2. The effects of mass flow rate and electrode divergence angle on the performance of gas-blown spark gap switches

    The effects of mass flow rate and electrode divergence angle on the performance of a gas-blown spark gap switch operated in the self-breakdown repetitive mode are presented. The switch was flushed with a two-dimensional, laminar flow directed between a diverging pair of electrodes. Voltage versus t …

    ttu Repository record for The effects of mass flow rate and electrode divergence angle on the performance of gas-blown spark gap switches (opens in a new tab)

  3. Assessments and Computational Simulations in Support of a Time-Varying Mass Flow Rate Measurement Technique for Pulsatile Gas Flow

    … a suitable temperature measurement of the mean flow gas. Together these three measurements allow for an incompressible CFD simulation (using a well-tested and robust model) for the cross-section independent time-varying mass flow rate through the orifice meter. The mean value of this …

    mtu Repository record for Assessments and Computational Simulations in Support of a Time-Varying Mass Flow Rate Measurement Technique for Pulsatile Gas Flow (opens in a new tab)

  4. The effect of changing temperature and mass flow rate on the charging and discharging time in a horizontal packed bed passive space heating system

    … a horizontal packed bed with a uni-directional flow, as a method of storing thermal energy for residential use. The quantitative research method was selected for this study. Both an empirical and a numerical research design were included. The empirical research design was comprised of the …

    nwu-za Repository record for The effect of changing temperature and mass flow rate on the charging and discharging time in a horizontal packed bed passive space heating system (opens in a new tab)

  5. Simulation of corn-to-screw conveyor interaction using discrete element method for predicting the effects of screw inclination angles on mass flow rate and auger power requirement

    … to transport granular material at a controlled rate, such as transporting wheat or corn in a harvesting machine, feeding biomass or other solid fuels into a combustion chamber, or transferring grain into a storage using handling systems. They are also used in combine harvesters, grain elevators, …

    iastate Repository record for Simulation of corn-to-screw conveyor interaction using discrete element method for predicting the effects of screw inclination angles on mass flow rate and auger power requirement (opens in a new tab)

  6. Analysis of a Flat-Plate, Liquid-Desiccant, Dehumidifier and Regenerator

    … takes into account the desiccant, water and air flow streams. A parametric analysis was performed to evaluate the influence of some of the most important operational parameters on mass transfer performance, such as flow configuration, water mass flow rate and inlet temperature, and desiccant mass …

    queens Repository record for Analysis of a Flat-Plate, Liquid-Desiccant, Dehumidifier and Regenerator (opens in a new tab)

  7. MASS FLOW MEASUREMENT IN THE INLET OF A TRANSONIC AXIAL COMPRESSOR

    … dynamics. The new inlet bell mouth was integrated into the test rig to provide more favorable flow conditions for more accurate measurement of the mass flow rate entering the rig. A computational fluid dynamics analysis was conducted using a 3-D model of the inlet of the test rig to obtain a …

    nps Repository record for MASS FLOW MEASUREMENT IN THE INLET OF A TRANSONIC AXIAL COMPRESSOR (opens in a new tab)

  8. Particulate fouling of sensible heat exchangers

    … of sand in water was studied as a function of mass flow rate and wall temperature. The experiments were carried out by circulating the liquid through a single tube maintained at constant heat flux by electrical heating. The change in fouling resistance and pressure drop with time was measured. …

    ubc Repository record for Particulate fouling of sensible heat exchangers (opens in a new tab) Download PDF for Particulate fouling of sensible heat exchangers (opens in a new tab)

  9. Optimal Sizing and Control of Hybrid Rocket Vehicles

    … specific mission. In a hybrid rocket engine, the mass flow rate of the oxidizer can be throttled to enhance the performance of the rocket. First, an analysis of the internal ballistics and the ascent trajectory has been carried out for different mass flow rates of the oxidizer as a function of …

    embry-riddle Repository record for Optimal Sizing and Control of Hybrid Rocket Vehicles (opens in a new tab)

  10. An experimental and numerical study of diffusion flames in cross-flow and quiescent environment at smoke point condition.

    … point diffusion flame in a quiescent and cross-flow condition was performed. The fuel mass flow rate of a turbulent smoke point flame was determined at a quiescent condition and in cross-flow with velocity ranging from 2 to 4 m/s. This fuel mass flow rate is defined as the Critical Fuel Mass …

    oklahoma-thes Repository record for An experimental and numerical study of diffusion flames in cross-flow and quiescent environment at smoke point condition. (opens in a new tab)

  11. Evaluation and visualization of refrigerant two-phase flow in distributor

    This study aims at understanding flow distribution exiting thermostatic expansion valve and through distributor. It is well known that when two-phase flow goes through separation devices such as distributors and headers, mal-distribution is unavoidable due to different properties of liquid and …

    uiuc Repository record for Evaluation and visualization of refrigerant two-phase flow in distributor (opens in a new tab)

  12. An experimental study of the wall characteristics of a local fluid constriction plasma generator

    … efficiency is nonzero. This length varies with mass flow rate, current, and duct diameter. Nondimensionalization of the energy equation results in a dimensionless S parameter which determines the thermal development length. The S parameter is the product of mass flow rate, electrical …

    vt Repository record for An experimental study of the wall characteristics of a local fluid constriction plasma generator (opens in a new tab)

  13. Mass Flow Measurement of Pneumatically Conveyed Solids Through Multi-Modal Sensing and Data-Driven Modelling

    … On-line continuous measurement of the mass flow rate of solids in pneumatic conveying pipelines is essential to balance the mass and energy and further to control the energy efficiency and raw material consumption. This thesis describes a novel method of mass flow rate measurement of …

    kent Download PDF for Mass Flow Measurement of Pneumatically Conveyed Solids Through Multi-Modal Sensing and Data-Driven Modelling (opens in a new tab)

  14. A CFD Investigation of Balcony Spill Plumes

    … studies were conducted to characterize the mass flow rates in balcony spill plumes (BSP), a type of buoyant fire plume occurring in atria. The variation of BSP mass flow rate as a function of elevation, fire size and fire compartment geometry was examined both numerically and experimentally. …

    waterloo Repository record for A CFD Investigation of Balcony Spill Plumes (opens in a new tab)

  15. Thermodynamic studies in flow metrology

    Thermodynamic studies in flow metrology were carried out to improve the realization of fluid flow quantities. First, a metrological competence study of the dynamic gravimetric gas mass flow rate measurement standard of MIKES was carried out. Then, a theoretical and experimental study to clarify the …

    aalto Repository record for Thermodynamic studies in flow metrology (opens in a new tab)

  16. Minimizing Entropy Generation Within Heat Exchanger Tubes Subjected to a Constant Wall Heat Flux

    … the entropy gene ration number for a fluid flowing in a heat exchanger subjected to a constant wall heat flux. The entropy generation number, N, was defined by Bejan as: N = (T/q)(dS/dl). It will be shown that N may be expressed as a function of mass flow rate and tube inside diameter for …

    marquette Repository record for Minimizing Entropy Generation Within Heat Exchanger Tubes Subjected to a Constant Wall Heat Flux (opens in a new tab)

  17. Transferência de calor no escoamento bifásico de dois componentes, regime anular, tubo vertical

    … heat transfer coeficient during the two phase upflow (water + air) in vertical tubes was developped. The design and construction of the equipment is then discussed. The experiments were carried out in one tube, 6mm int and 1500mm of length, which suffered heat fluxes ranging 2 from 0,225 to 0,704 …

    brazil-uerj Repository record for Transferência de calor no escoamento bifásico de dois componentes, regime anular, tubo vertical (opens in a new tab)

  18. Experimental Investigation of Self-Pressurizing Propellant Injection Into a Rocket Motor Combustion Chamber

    … study of nitrous oxide (N2O) two-phase-flashing flows using carbon dioxide (CO2) as an analog. An experiment was designed and performed to replicate the flashing flow through a sharp-edged rocket injector. Pressure, temperature and mass flow rate were measured across the injector channel. Data …

    calgary Repository record for Experimental Investigation of Self-Pressurizing Propellant Injection Into a Rocket Motor Combustion Chamber (opens in a new tab)

  19. Analytical Modeling of a Novel Elastohydrodynamic Seal Design for Supercritical CO2 Power Cycles

    … seal clearance (h0) of 50µm, which resulted in a mass flow rate of 0.00162 kg/s. Also, a parametric study was conducted to see the effects of the seal thickness, shaft diameter, and seal length on the performance of the seal. The results showed that all three geometric parameters play a major role …

    gsu Repository record for Analytical Modeling of a Novel Elastohydrodynamic Seal Design for Supercritical CO2 Power Cycles (opens in a new tab)

Page 1 of 35