Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 22 for “"Mass Sensor"”.

  1. IMPROVED SENSITIVITY OF RESONANT MASS SENSOR BASED ON MICRO TILTING PLATE AND MICRO CANTILEVER

    Vapor sensors have been used for many years. Their applications range from detection of toxic gases and dangerous chemicals in industrial environments, the monitoring of landmines and other explosives, to the monitoring of atmospheric conditions. Microelectrical mechanical systems (MEMS) …

    mtu Repository record for IMPROVED SENSITIVITY OF RESONANT MASS SENSOR BASED ON MICRO TILTING PLATE AND MICRO CANTILEVER (opens in a new tab)

  2. Development of high-Q micromechanical cell mass sensor (optimizing parameters for in-plane mass sensors)

    … functionalities. Many MEMS-based resonant sensors have been extensively studied and used as biological and chemical sensors. However, previous works have shown that there are several technology limitations that inhibit application of various mass sensors to mass measurement and analysis, …

    uiuc Repository record for Development of high-Q micromechanical cell mass sensor (optimizing parameters for in-plane mass sensors) (opens in a new tab)

  3. The Effect of Sensor Mass, Sensor Location, and Delamination Location of Different Composite Structures Under Dynamic Loading

    This study investigated the effect of sensor mass, sensor location, and delamination location of different composite structures under dynamic loading. The study pertains to research of the use of accelerometers and dynamic response as a cost-effective and reliable method of structural health …

    calpoly Repository record for The Effect of Sensor Mass, Sensor Location, and Delamination Location of Different Composite Structures Under Dynamic Loading (opens in a new tab)

  4. Use of Instabilities in Electrostatic Micro-Electro-Mechanical Systems for Actuation and Sensing

    … actuated micro switches and binary micro gas sensors. Models are developed for the devices under consideration where the structures are treated as elastic continua. The electrostatic force is treated as a nonlinear function of displacement derived under the assumption of parallel-plate …

    waterloo Repository record for Use of Instabilities in Electrostatic Micro-Electro-Mechanical Systems for Actuation and Sensing (opens in a new tab)

  5. OPTICAL AND OPTOMECHANICAL RESONATORS AND THEIR APPLICATIONS IN COMMUNICATION AND SENSING

    … that an OMO can function as a high-resolution mass sensor based on optomechanical oscillation frequency shift. In an OMO based mass sensor, optical power simultaneously servers as an efficient actuator and a sensitive probe for monitoring optomechanical oscillation frequency variations. The …

    unm Repository record for OPTICAL AND OPTOMECHANICAL RESONATORS AND THEIR APPLICATIONS IN COMMUNICATION AND SENSING (opens in a new tab)

  6. Microcantilever resonators for biodetection of food contaminants

    … on the evaluation of microcantilever-based mass sensor performances for biodetection of toxic molecules in food. We investigated the possibility to detect human pathogen bacteria (Salmonella spp.), milk allergens, mycotoxins and carcinogenic anabolic agent in meat. The results in terms of …

    poli-torino Repository record for Microcantilever resonators for biodetection of food contaminants (opens in a new tab)

  7. Fabrication, characterization and analysis of carbon nanotube based nanoelectromechanical system

    … carbon nanotubes (MWNTs) and fabrication of CNT sensors are described first in this thesis. The feasibility and capability of using catalytic CVD grown MWNTs as ultrasensitive mass sensor which exhibit attogram mass sensitivity are investigated and evaluated. This attogram-sensing capability …

    nus Repository record for Fabrication, characterization and analysis of carbon nanotube based nanoelectromechanical system (opens in a new tab) Download file for Fabrication, characterization and analysis of carbon nanotube based nanoelectromechanical system (opens in a new tab)

  8. Gapped cantilever for the enhancement of strain sensitivity and energy efficiency

    … vibration energy harvester and resonant mass sensor are carefully investigated in this work. Multiple prototypes of these applications both in meso-scale and micro-scale are designed, manufactured and characterized. The testing results show good agreement with theoretical expectation, and …

    wayne-thes Repository record for Gapped cantilever for the enhancement of strain sensitivity and energy efficiency (opens in a new tab)

  9. Low loss film bulk acoustic resonator in liquid environments

    … resonator (FBAR) is an acoustic resonator mass sensor using the resonance of longitudinal or shears acoustic waves. There is a significant Q factor loss in liquid medium due to acoustic energy loss. This drastically affects the minimum detectable mass of the sensor. This research describes …

    missouri Repository record for Low loss film bulk acoustic resonator in liquid environments (opens in a new tab)

  10. MEMS based atomic scale 3D printer for nanofabrication

    … of a thermal evaporator, patterning mask, mass sensor, heaters, temperature sensors and Van de Pauw setups. The assembled 3D printer dimensions are 3.8 mm x 2.5 mm x 1.8 mm (LxWxH) and it is therefore ideal for cryogenic environments. Quenched condensed thin film metals can be deposited …

    bu Repository record for MEMS based atomic scale 3D printer for nanofabrication (opens in a new tab)

  11. Fab-on-a-chip: a MEMS approach to nanofabrication

    … a re-purposed quartz crystal oscillator as a mass sensor. Another fab-on-a-chip device is a writer. A device capable of positioning a silicon plate with <10 nm resolution in two dimensions. It can be used either to position stencils of nanoscale devices or to draw nanoscale devices directly in …

    bu Repository record for Fab-on-a-chip: a MEMS approach to nanofabrication (opens in a new tab)

  12. MEMS MULTI-DOF WEAKLY COUPLED RESONATOR BASED ON MODE LOCALIZATION FOR MASS CHANGE SENSING APPLICATIONS

    … the usage of nanoparticles as well quantified mass changes is described. The mass sensitivity of the coupled resonator can be characterized accordingly. It has been demonstrated that a) the resonance amplitude ratio yields a sensitivity to mass changes around two times larger than amplitude …

    liege Repository record for MEMS MULTI-DOF WEAKLY COUPLED RESONATOR BASED ON MODE LOCALIZATION FOR MASS CHANGE SENSING APPLICATIONS (opens in a new tab) Download PDF for MEMS MULTI-DOF WEAKLY COUPLED RESONATOR BASED ON MODE LOCALIZATION FOR MASS CHANGE SENSING APPLICATIONS (opens in a new tab)

  13. Radioisotope-Powered Parallel Electron Lithography: Applications To Solar Cells, Thermo-Opto Mechanical Excitation, Inertial Sensors

    This thesis presents a new potentially low-cost massively parallel electron lithography system, which we term as RadioIsotope-powered Parallel Electron Lithography (RIPEL). We demonstrate its applications to solar cells, thermo-opto-mechanical excitation, inertial sensors, micro-speakers, …

    cornell Repository record for Radioisotope-Powered Parallel Electron Lithography: Applications To Solar Cells, Thermo-Opto Mechanical Excitation, Inertial Sensors (opens in a new tab)

  14. Sensitivity enhancement in micro-electromechanical systems for sensor applications

    <p>Micro-mechanical sensors are typically fabricated both in large numbers and economically using the photolithographic processes that were originally developed in the integrated circuit industry. The magnitude of a change in resonant frequency of a micro-me chanical structure can be used to …

    oxford Repository record for Sensitivity enhancement in micro-electromechanical systems for sensor applications (opens in a new tab)

  15. Design and Implementation of a Controller for an Electrostatic MEMS Actuator and Sensor

    … MEMS device can be used as both actuator and sensor. As an actuator it will have the advantage of large stable travel range up to 90% of the gap. As a sensor the beam is to be driven into chaotic motion which is very sensitive changes in the system parameters. Two versions of the controller …

    waterloo Repository record for Design and Implementation of a Controller for an Electrostatic MEMS Actuator and Sensor (opens in a new tab)

  16. Electrostatic MEMS Bifurcation Sensors

    … evidence of a new instability in electrostatic sensors, dubbed quasi-static pull-in, in two types of micro-sensors operating in ambient air. We find that the underlying mechanism and features of this instability are distinct from those characterizing hitherto known static and dynamic pull-in …

    waterloo Repository record for Electrostatic MEMS Bifurcation Sensors (opens in a new tab)

  17. RF MEMS Resonators for Mass Sensing Applications

    … are found to be extremely sensitive to added mass. Along their unique sensing attributes, they also offer foundry compatible microfabrication processes, low DC power consumption, and CMOS integration compatibility. In this work, electrostatically and piezoelectrically actuated RF MEMS bulk …

    usf Repository record for RF MEMS Resonators for Mass Sensing Applications (opens in a new tab)

  18. Intentional nonlinearity in the small scale with applications to atomic force microscopy (AFM) and mass sensing

    … of ultra-sensitive nano/micromechanical sensor technology has had a transformative effect on the field of nanoscience. These devices are currently used in many different applications including biological, chemical and inertial sensing; atomic force microscopy and infrared spectroscopy; …

    uiuc Repository record for Intentional nonlinearity in the small scale with applications to atomic force microscopy (AFM) and mass sensing (opens in a new tab)

Page 1 of 2