Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 50 for “"Mass transfer models"”.

  1. Development and validation of heat and mass transfer models for meat carcass chilling

    … safe meat, without compromising yield. Computer models to simulate heat and mass transfer during chilling of meat carcasses can be used to determine optimal operating conditions to maximize chilling rates and minimize moisture loss and potential growth of foodborne pathogens and spoilage …

    nebraska Repository record for Development and validation of heat and mass transfer models for meat carcass chilling (opens in a new tab)

  2. Heat and mass transfer models of the University of Tennessee at Chattanooga distillation column

    … shown on figure 8. In this thesis, mathematical models that relate to heat and mass transfer during a binary distillation of methanol-water mixture are developed and simulated through analytical and numerical methods [1]. Collections of these models were generated from theoretical correlations …

    utc Repository record for Heat and mass transfer models of the University of Tennessee at Chattanooga distillation column (opens in a new tab)

  3. Development and validation of mass transfer models for the design of agitated gas-liquid reactors

    … the homogeneity of dispersion and to enhance the transfer of reacting compounds between gas and liquid. The design and scaleup of gas-liquid reactors is problematic due to non-ideal mixing, heat and mass transfer limitations. In this work, phenomenological models were developed and validated …

    aalto Repository record for Development and validation of mass transfer models for the design of agitated gas-liquid reactors (opens in a new tab)

  4. Application of membrane mass transfer models to direct potable reuse projects employing reverse osmosis and nanofiltration

    … during potable reuse applications. Membrane models have been developed and employed to evaluate mass transfer of solutes across high-pressure membranes and incorporate process phenomena including osmotic pressure, surface adsorption, concentration polarization, and electrokinetic effects as …

    colo-mines Repository record for Application of membrane mass transfer models to direct potable reuse projects employing reverse osmosis and nanofiltration (opens in a new tab)

  5. Development of Hydraulic Models, Mass Transfer Models, and Dynamic Models of Solvent-Based Carbon Capture Processes with Uncertainty Quantification and Validation with Pilot Plant Data

    … capture technologies, computational tools and models are being developed under the auspices of the U.S. Department of Energy's Carbon Capture Simulation Initiative (CCSI). The CCSI process modeling team was tasked with developing a "gold-standard" model that will serve as a definitive reference …

    wvu Repository record for Development of Hydraulic Models, Mass Transfer Models, and Dynamic Models of Solvent-Based Carbon Capture Processes with Uncertainty Quantification and Validation with Pilot Plant Data (opens in a new tab)

  6. Flow and transport modeling of a heterogeneous field site contaminated with dense chlorinated solvent waste

    … water remediation. Results of aqueous phase mass balances using measured data indicate the existence of a continuing source of trichloroethylene to ground water during remediation. Overall mass balances indicate that ground water extraction has removed a small fraction of total subsurface …

    rice Repository record for Flow and transport modeling of a heterogeneous field site contaminated with dense chlorinated solvent waste (opens in a new tab)

  7. Modeling methods of a rotary hearth forging furnace

    A series of single-physics heat and mass transfer models of a rotary hearth forging furnace are studied for design, selection, and implementation into a multi-physics full system model with a mind towards accuracy and computational efficiency. The transfer modes studied are fluid mass flow, …

    texas Repository record for Modeling methods of a rotary hearth forging furnace (opens in a new tab)

  8. Multicomponent liquid ion exchange with chabazite zeolites

    … sorption, the understanding of the basic mass-transfer processes associated with multicomponent zeolite ion-exchange systems is quite limited. This study was undertaken to evaluate Na-Ca-Mg-Cs-Sr ion exchange from an aqueous solution using a chabazite zeolite.</p> <p>Mass-transfer …

    utk-theses Repository record for Multicomponent liquid ion exchange with chabazite zeolites (opens in a new tab)

  9. Desorption of ammonia-water mixtures in microscale geometries for miniaturized absorption systems

    … Both concepts rely on falling-film heat and mass transfer mechanisms in the analyzer and rectifier sections. Segmented heat and mass transfer models, based on available correlations and modeling methodologies, were developed and used for the design of branched tray and vertical column test …

    gatech Repository record for Desorption of ammonia-water mixtures in microscale geometries for miniaturized absorption systems (opens in a new tab)

  10. Heat and mass transfer model for a coffee roasting process

    … to model the roasting process, the heat and mass transfer that take place during roasting were investigated and further quantified by means of heat and mass transfer models. Three heat and mass transfer models were identified from literature to be able to adequately model the moisture content …

    nwu-za Repository record for Heat and mass transfer model for a coffee roasting process (opens in a new tab)

  11. Productivity Assessment of a Nanofiltration Membrane Process Treating Unaerated or Aerated Groundwater

    … did not significantly affect constituent mass transfer. Phase 2 demonstrated that NF removed total dissolved solids and total organic carbon content greater than 96 percent (%) and 86%, respectively. Phase 3, which exhibited operational difficulties and flux decline, suggested that …

    ucf Repository record for Productivity Assessment of a Nanofiltration Membrane Process Treating Unaerated or Aerated Groundwater (opens in a new tab)

  12. Waste heat recovery, thermal storage, and heat pumping in drying processes

    … the complexities of several transport phenomena (mass, momentum, and energy) occurring simultaneously, and their influence on material properties. Dryers reject ~ 58% of the total input energy as waste heat or losses. While system efficiency can be improved by optimizing system design and …

    gatech Repository record for Waste heat recovery, thermal storage, and heat pumping in drying processes (opens in a new tab)

  13. Optimal thermal compressors for miniaturized ammonia-water absorption systems

    … Recent advances in microscale heat and mass exchangers have attracted interest in the development of small-capacity vapor-absorption systems. In the first part of this study, a state-of-the-art small capacity ammonia-water absorption chiller is developed. The results of this development …

    gatech Repository record for Optimal thermal compressors for miniaturized ammonia-water absorption systems (opens in a new tab)

  14. Mechanisms of liquid extraction in a pilot plant sieve plate column

    … pertinent to droplet hydrodynamics and mass transfer in perforated (sieve)plate liquid-liquid extractor columns has been reviewed. An experimental investigation was conducted in a 450 mm diameter perforated plate extractor with four plates using four different designs with holes of 1.588 …

    aston Download PDF for Mechanisms of liquid extraction in a pilot plant sieve plate column (opens in a new tab)

  15. Organic-inorganic hybrid materials for arsenic adsorption : surface complexation and intraparticle diffusion

    … conditions, respectively. Surface complexation models (SCM) can be developed to simulate the adsorption performance as a function of pH, arsenic concentrations, and ionic strength. And estimation of important adsorption parameters such as surface site density, and adsorption equilibrium …

    missouri Repository record for Organic-inorganic hybrid materials for arsenic adsorption : surface complexation and intraparticle diffusion (opens in a new tab)

  16. Direct-fired heat pump for multi-pass water heating using microchannel heat and mass exchangers

    … lack of compact and economically viable heat and mass exchangers. An improved understanding of the coupled heat and mass transfer processes in thermally driven absorption systems to be used as heat pump water heaters was obtained over the course of this study. In addition, microchannel heat and …

    gatech Repository record for Direct-fired heat pump for multi-pass water heating using microchannel heat and mass exchangers (opens in a new tab)

  17. SHELL-SIDE FLUID DYNAMICS AND MASS TRANSFER THROUGH HOLLOW FIBRE MEMBRANE MODULES

    … of shell-side flow and its effect on mass transfer and to compare the performance measured by the axial-flow configuration to that obtained by a commonly used alternative known as the helically-wound module design. Laminar flow and mass transfer models have been developed to examine …

    unsw Repository record for SHELL-SIDE FLUID DYNAMICS AND MASS TRANSFER THROUGH HOLLOW FIBRE MEMBRANE MODULES (opens in a new tab)

  18. Enhanced real-time bioaerosol detection : atmospheric dispersion modeling and characterization of a family of wetted-wall bioaerosol sampling cyclones

    … the source. A five fold increase in effective mass collection rate, a significant bioaerosol detection advantage, is projected for samplers designed to collect particles larger than the traditional limit of 10 micrometers AD when such particles are present in the source distribution. A family …

    texas Repository record for Enhanced real-time bioaerosol detection : atmospheric dispersion modeling and characterization of a family of wetted-wall bioaerosol sampling cyclones (opens in a new tab)

  19. Development of stable supported liquid membranes for the recovery of medium-chain fatty acids from organic waste streams

    … and selectivity for MCFAs while minimizing the transfer of short-chain fatty acids (SCFAs) and other solvents, establishing a basis for optimizing SLM properties. To ensure sustained membrane performance, a method for real-time, non-destructive monitoring of SLM degradation using electrochemical …

    ubc Repository record for Development of stable supported liquid membranes for the recovery of medium-chain fatty acids from organic waste streams (opens in a new tab) Download PDF for Development of stable supported liquid membranes for the recovery of medium-chain fatty acids from organic waste streams (opens in a new tab)

Page 1 of 3