Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 124 for “"Master Curve"”.

  1. Comparison of Creep Compliance Master Curve Models for Hot Mix Asphalt

    … a base and a surface mix. Creep compliance master curves (CCMC) were developed by shifting the curves to a reference temperature using time-temperature superposition. Three mathematical functions, Prony series, power and sigmoidal, were fitted to the experimental data using regression …

    vt Repository record for Comparison of Creep Compliance Master Curve Models for Hot Mix Asphalt (opens in a new tab)

  2. Evaluation of rheological master curve parameters for the practical specification grading of Canadian asphalt binders

    … to generate complex modulus and phase angle master curves across various temperatures and frequencies. The objective of this study is to simplify tests, correlating different DSR frequency sweep and master curve parameters such as limiting phase angle temperatures, intermediate temperature …

    queens Repository record for Evaluation of rheological master curve parameters for the practical specification grading of Canadian asphalt binders (opens in a new tab)

  3. EXPLORING THE MASTER CURVE PARAMETERS FOR EFFICIENT PERFORMANCE GRADING OF ASPHALT BINDERS FROM THE UNITED STATES OF AMERICA

    … Temperature Performance Grade (ITPG), and master curve parameters under slow and fast cooling rates. Significant correlations between DSR indicators at different cooling rates were observed. Considering efficiency in time consumption, fast cooling emerges as the preferred method for DSR …

    queens Repository record for EXPLORING THE MASTER CURVE PARAMETERS FOR EFFICIENT PERFORMANCE GRADING OF ASPHALT BINDERS FROM THE UNITED STATES OF AMERICA (opens in a new tab)

  4. Relating Vehicle Skid Friction To Pedestrian Slip Resistance on Pavements with Machine Learning Integration and Master Curve Development for Distress Prediction

    … to develop distress prediction models using the master Curve approach. Since the primary distresses governing pavement performance were identified to be fatigue cracking and permanent deformation (i.e., rutting), as documented by many Balanced Mix Design (BMD) studies currently under development …

    maryland Repository record for Relating Vehicle Skid Friction To Pedestrian Slip Resistance on Pavements with Machine Learning Integration and Master Curve Development for Distress Prediction (opens in a new tab)

  5. Exploring the Black Space of Compressive and Shear Modulus

    … with the standard analysis generating a Master Curve. One alternative to the master curve approach is a Black Space diagram, which is a rheological plot that can delineate either dynamic modulus |E*| or shear modulus |G*| vs. phase angle (δ). In this study, four asphalt binders were …

    arkansas Repository record for Exploring the Black Space of Compressive and Shear Modulus (opens in a new tab)

  6. Assessing the impact of potential regulatory changes on demonstrating compliance with reactor pressure vessel integrity requirements

    … temperature shift, and the implementation of the Master Curve as an alternative method for evaluating static fracture toughness. They are then evaluated on the basis of data availability, data uncertainty, regulatory impact, and model versatility. It is found that the information fusion model may …

    missouri Repository record for Assessing the impact of potential regulatory changes on demonstrating compliance with reactor pressure vessel integrity requirements (opens in a new tab)

  7. Prediction of long-term creep behavior of epoxy adhesives for structural applications

    … time-temperature superposition method produces a master curve allowing the long-term creep compliance to be estimated. The physics-based Coupling model is found to fit well the long-term creep master curve. The equivalence of the temperature and moisture effect on the creep compliance of the epoxy …

    tamu Repository record for Prediction of long-term creep behavior of epoxy adhesives for structural applications (opens in a new tab)

  8. Viscoelastic inverse analysis of FWD data using genetic algorithms

    Dynamic modulus (|E*|) master curve is a fundamental material property for an asphalt pavement. It is also a key input to Pavement-ME, a pavement design and analysis software that can predict progression of distresses. Falling Weight Deflectometer (FWD) is a nondestructive test whose results are …

    msu Repository record for Viscoelastic inverse analysis of FWD data using genetic algorithms (opens in a new tab)

  9. HIGH STRENGTH SEMI-ACTIVE ENERGY ABSORBERS USING SHEAR- AND MIXED-MODE OPERATION AT HIGH SHEAR RATES

    … results are presented both as flow curves according to established practice, and as an alternate nondimensionalized analysis based on Mason number. The Mason number plots show that, with appropriate correction coefficients for operating temperature, the varied flow curve data can be …

    maryland Repository record for HIGH STRENGTH SEMI-ACTIVE ENERGY ABSORBERS USING SHEAR- AND MIXED-MODE OPERATION AT HIGH SHEAR RATES (opens in a new tab)

  10. Thermo-mechanical properties of cross-linked epoxy based systems: A molecular simulation study

    … data that can then be collapsed onto a master curve, which, in turn, can supplement the experimental master curve with data on the material behavior at ballistic strain rates. It is thus demonstrated that molecular simulations can be a powerful tool in the arsenal of material scientists …

    ttu Repository record for Thermo-mechanical properties of cross-linked epoxy based systems: A molecular simulation study (opens in a new tab)

  11. Linear and Nonlinear Viscoelastic Characterization of Proton Exchange Membranes and Stress Modeling for Fuel Cell Applications

    … was characterized over a period of time. Hygral master curves were constructed noting hygral shift factors, followed by thermal shifts to construct a hygrothermal master curve. This process was reversed (thermal shifts followed by hygral shifts) and was seen to yield a similar hygrothermal master …

    vt Repository record for Linear and Nonlinear Viscoelastic Characterization of Proton Exchange Membranes and Stress Modeling for Fuel Cell Applications (opens in a new tab)

  12. Flexural Creep Behavior of Polymer Concrete Systems

    … is governed by the polymer matrix. Use of this master curve enables prediction of the long-term creep compliance of different PC systems through a range of temperatures, stresses and resin contents from limited data on a single system over short time periods (ca. 10 hours). Introduction of …

    rice Repository record for Flexural Creep Behavior of Polymer Concrete Systems (opens in a new tab)

  13. Advanced Tools For Characterizing HMA Fatigue Resistance

    … Characterization (VEC) test, from which the RM master curve can be developed. Material properties from the RM master curve can be easily determined and applied in the CMSE method. The modified repeated direct tension (RDT*) test removes rest periods and unwanted healing from the RDT test. The …

    tamu Repository record for Advanced Tools For Characterizing HMA Fatigue Resistance (opens in a new tab)

  14. Time, temperature and frequency viscoelastic behavior of commercial polymers

    … lambda, as a function of real time, t, from the master curve obtained by TTSP. Dynamic Mechanical Analysis (DMA) tests were done to get complex relaxation modulus, E*(o), as a function of frequency. Frequency Temperature Superposition (FTSP) was done to extend the frequency range. Mathematical …

    wvu Repository record for Time, temperature and frequency viscoelastic behavior of commercial polymers (opens in a new tab)

  15. Smart composite magnetorheological elastomer materials under coupled effects of temperature and magnetic field for vibration control

    … analysis. The generalized dynamic modulus master curve of MREs is constructed for the first time by the horizontal and vertical shift factors. The constructed master curve and shift factors can be used to predict the viscoelastic properties of the MREs beyond the DMA experiment range of …

    soton Download PDF for Smart composite magnetorheological elastomer materials under coupled effects of temperature and magnetic field for vibration control (opens in a new tab)

  16. Flexural Creep Behavior Of Adhesively Bonded Metal And Composite Laminates

    … principle (TTSP) was used to construct the master curves to predict longer-term creep response of the adhesively bonded beams. Prony series was used to model the Master curve by non-linear least square fitting. The analytical results showed good agreement with finite element results where …

    wayne-thes Repository record for Flexural Creep Behavior Of Adhesively Bonded Metal And Composite Laminates (opens in a new tab)

  17. Nanoindentation Creep Analysis for A Spherical Indenter

    … CT against HIE• coincides with the theoretical master curve of conical indenter simulations. The effect of work hardening is analyzed due to the roundness of the spherical tip indenter. In the present analysis, we found the commonly held assumption that the area of the indent increases with the …

    odu Repository record for Nanoindentation Creep Analysis for A Spherical Indenter (opens in a new tab)

  18. Development of tension and compression creep models for wood using the time-temperature superposition principle

    … was shifted along the log-time axis to obtain a "master" curve that describes the creep response of the specimens. All compliance curves also required vertical shifting. The experimental horizontal shift factors followed the Arrhenius formulation that describes the shift factor relation for …

    vt Repository record for Development of tension and compression creep models for wood using the time-temperature superposition principle (opens in a new tab)

  19. Effects of Long-Term Creep on the Integrity of Modern Wood Structures

    … superposition was applied to form a master curve that extended for a maximum of 2 years. The horizontal shift factors followed an Arrhenius relation with activation energies ranging between 75 and 130 kJ/mole. It was not possible to superpose the compliance curves at 70 and 80° C, …

    vt Repository record for Effects of Long-Term Creep on the Integrity of Modern Wood Structures (opens in a new tab)

  20. Evaluation of New and Existing Test Methods to Assess Recycled Asphalt Pavement Properties for Mix Design

    … dynamic shear rheometer. Two methods were used:o Master-master curve (MMC) using the CAM (Christensen-Anderson-Mastereanu) model.o Master-master curve using the CAS (Christensen-Anderson-Sharrock) model.* Mortar method developed by the University of Wisconsin-Madison researchers* Backcalculation …

    unr Repository record for Evaluation of New and Existing Test Methods to Assess Recycled Asphalt Pavement Properties for Mix Design (opens in a new tab)

Page 1 of 7