Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 107 for “"Master curves"”.

  1. Two-layer master curves for electromagnetic sounding

    Includes bibliographical references (pages 69-70).

    colo-mines Repository record for Two-layer master curves for electromagnetic sounding (opens in a new tab)

  2. Long-term creep modeling of wood using time temperature superposition principle

    Long-term creep and recovery models (master curves) were developed from short-term data using the time temperature superposition principle (TTSP) for kiln-dried southern pine loaded in compression parallel-to-grain and exposed to constant environmental conditions (~70°F, ~9%EMC). Short-term …

    vt Repository record for Long-term creep modeling of wood using time temperature superposition principle (opens in a new tab)

  3. The time-temperature behavior of graphite epoxy laminates

    … whenever possible. At elevated temperatures, master curves of matrix dominated unidirectional laminates are obtained using the time-temperature superposition principle. Using the principal properties (E₁₁, E₂₂(t), G₁₂(t) and v₁₂), master curves of other off-axis laminates reduced at any …

    vt Repository record for The time-temperature behavior of graphite epoxy laminates (opens in a new tab)

  4. Modeling of the linear viscoelastic response of polymer modified asphalt binders at intermediate and high temperatures

    … of the resulting isothermal response curves indicated that simple time-temperature superposition is applicable, and dynamic master curves can be constructed by empirical superposition. Effects of polymer type, polymer content, and aging treatment on the behavior of dynamic master …

    vt Repository record for Modeling of the linear viscoelastic response of polymer modified asphalt binders at intermediate and high temperatures (opens in a new tab)

  5. Viscoelastic response of polyethylene to temperature and pressure

    … were used successfully to construct the master curves of stress versus reduced strain-rate. These master curves, which were found to have been taken in the range of linear-viscoelastic behaviour of the polymers, were employed to derive the stress-relaxation moduli and the relaxation …

    auckland-ms Repository record for Viscoelastic response of polyethylene to temperature and pressure (opens in a new tab)

  6. Creep behaviour of wood-plastic composites

    … analysis (DMA), short-term creep tests for master curve construction based on the time-temperature-stress superposition principle (TTSSP), and a long-term creep test. Moreover, a newly established stress-temperature incorporated creep (STIC) model, a modified Williams-Landel-Ferry (WLF) …

    ubc Repository record for Creep behaviour of wood-plastic composites (opens in a new tab) Download PDF for Creep behaviour of wood-plastic composites (opens in a new tab)

  7. Performance evaluation of coarse-graded field mixtures using dynamic modulus results gained from testing in indirect tension mode of testing

    … for use in determining binder shear complex master curves. Through this information the modified Witczak model was used to create │E*│ master curves which were then compared against the indirect tension (IDT) test │E*│ experimentally created master curves. According to the results the …

    iastate Repository record for Performance evaluation of coarse-graded field mixtures using dynamic modulus results gained from testing in indirect tension mode of testing (opens in a new tab)

  8. Hveem Mix Design and Engineering Properties of Cold In-Place Recycling Mixtures

    … mixtures, c) determine the dynamic modulus (E*) master curves of CIR mixtures, d) evaluate the resistance to permanent deformation of CIR mixtures, and e) conduct a mechanistic-empirical analysis of rutting performance to determine layer coefficients for CIR mixtures.CIR mix designs were …

    unr Repository record for Hveem Mix Design and Engineering Properties of Cold In-Place Recycling Mixtures (opens in a new tab)

  9. Investigation on the Mechanisms of Elastomechanical Behavior of Resilin

    … Finally, doubly shifted dynamic moduli master curves are developed by applying the time-temperature concentration superposition principle (TTCSP), and compared to results obtained with natural resilin from locusts, dragonflies and cockroaches. The resulting master curves show that the …

    vt Repository record for Investigation on the Mechanisms of Elastomechanical Behavior of Resilin (opens in a new tab)

  10. Viscoelastic Modeling of Straight and Modified Binders at Intermediate and High Temperatures

    … Principle was used to construct the master curves. The shift factors were determined based on the complex shear modulus master curves and verified for the phase angle, storage shear modulus and loss shear modulus. After construction of the master curves, non-linear regression was used …

    vt Repository record for Viscoelastic Modeling of Straight and Modified Binders at Intermediate and High Temperatures (opens in a new tab)

  11. Examination of the Aging Properties of Novel Cyanate Ester Thermosets and the Subsequent Evaluation of the Material under Application Conditions

    … cured resin and a family of isothermal modulus curves was established. These data were then shifted, following WLF theory, to create a master curve of storage modulus with respect to measurement frequency. The resultant master curves allowed the prediction of long term mechanical behavior of the …

    vt Repository record for Examination of the Aging Properties of Novel Cyanate Ester Thermosets and the Subsequent Evaluation of the Material under Application Conditions (opens in a new tab)

  12. Effect Of Nanoclay On Binder Rheology And HMA Rutting Resistance

    … results were interpreted using storage modulus master curves. These master curves showed that the storage modulus increased with an increase in nanoclay. The HMA specimens were tested for rutting resistance using the APA. The results showed that the rutting resistance of HMA specimens based on …

    nodak Repository record for Effect Of Nanoclay On Binder Rheology And HMA Rutting Resistance (opens in a new tab)

  13. Investigation of Waterborne Epoxies for E-Glass Composites

    … analysis (DMA) was then used to create master curves of the storage modulus (E') in the frequency domain. The frequency range of the master curves and resulting cooperativity plots clearly varied depending on the surface treatment of the glass fibers. It was determined that the …

    vt Repository record for Investigation of Waterborne Epoxies for E-Glass Composites (opens in a new tab)

  14. Characterization and Lifetime Performance Modeling of Acrylic Foam Tape for Structural Glazing Applications

    … the time temperature superposition principle, master curves of VHB tape storage and loss moduli in shear and tension were developed with data from a dynamic mechanical analyzer (DMA). The thermal shift factors obtained from these constitutive tests were successfully applied to the creep rupture …

    vt Repository record for Characterization and Lifetime Performance Modeling of Acrylic Foam Tape for Structural Glazing Applications (opens in a new tab)

  15. Linear and Nonlinear Viscoelastic Characterization of Proton Exchange Membranes and Stress Modeling for Fuel Cell Applications

    … was characterized over a period of time. Hygral master curves were constructed noting hygral shift factors, followed by thermal shifts to construct a hygrothermal master curve. This process was reversed (thermal shifts followed by hygral shifts) and was seen to yield a similar hygrothermal master …

    vt Repository record for Linear and Nonlinear Viscoelastic Characterization of Proton Exchange Membranes and Stress Modeling for Fuel Cell Applications (opens in a new tab)

  16. Performance Evaluation of Asphalt Mixtures with Tire Rubber Modified Binder

    … was evaluated by means of dynamic modulus master curves, fatigue cracking, permanent deformation, and reflective cracking resistance. Dynamic modulus tests were conducted using the Asphalt Mixture Performance Tester (AMPT) device and the master curves were built using AASHTO R84 standard …

    unr Repository record for Performance Evaluation of Asphalt Mixtures with Tire Rubber Modified Binder (opens in a new tab)

  17. Creep rupture and life prediction of polymer composites

    … an approach is referred to as development of Master curves.;This work, at the Constructed Facilities Center of West Virginia University, focuses on characterization of creep rupture behavior of composite materials using both experimental and theoretical approaches. Composite materials with …

    wvu Repository record for Creep rupture and life prediction of polymer composites (opens in a new tab)

  18. Effect of alternative crosslinking agents on the thermo-rheological properties of SBS-modified asphalts

    … The appearance of the “shoulder” on the master curves of G'(ω) and the local maximum followed by the local minimum on the master curves of tanδ(ω) suggested exceptional resistance of modified asphalts crosslinked by sulfur and sulfur-based crosslinkers to deformation. The development and …

    calgary Repository record for Effect of alternative crosslinking agents on the thermo-rheological properties of SBS-modified asphalts (opens in a new tab)

  19. Influence of post-consumer recycled asphalt shingles on hot mix asphalt containing fractionated recycled asphalt pavement

    … From the dynamic modulus testing, master curves were constructed to characterize the stress/strain response of the HMA samples. From the extracted binders, a suite of Superpave tests was conducted at different temperatures and frequencies to build master curves for analyzing how the …

    iastate Repository record for Influence of post-consumer recycled asphalt shingles on hot mix asphalt containing fractionated recycled asphalt pavement (opens in a new tab)

  20. Rheology and performance evaluation of Polyoctenamer as Asphalt Rubber modifier in Hot Mix Asphalt

    … temperature. Further, the construction of the master curves showed that asphalt rubber binders with and without PO have similar stiffness performance.</p> <p>The performances for the dynamic modulus, flow number and indirect tensile strength ratio test of the laboratory-produced mixtures with …

    iastate Repository record for Rheology and performance evaluation of Polyoctenamer as Asphalt Rubber modifier in Hot Mix Asphalt (opens in a new tab)

Page 1 of 6