Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 16 of 16 for “"Master of Science in Applied Materials Science"”.
-
Development of an SLA Printable Resin for Modeling Mild and Moderate Aortic Stenosis
The heart is one of the most important organs in the human body, and heart disease is the leading cause of death in the world. Particularly, aortic stenosis (AS), characterized by the narrowing of the aortic valve (AV) opening during ventricular ejection, remains a major cause of global …
-
The Effects Of Tpo And Tpe On Polyethylene Blends In Plastic Pipe Applications
… efficiency due to plastic deformation of the inner wall (liner). This deformation is caused when the pipe is coiled for storage or transportation. To address these issues, this study investigated various blends composed of high density polyethylene (HDPE), linear low density …
-
Analysis of Contaminants on Ground Glass Pozzolan and the Effects on Pozzolan Performance in Mortar
Using ground glass pozzolan as a replacement for portland cement can reduce the CO2 emissions associated with concrete production and utilize waste glass that would otherwise end up in landfills. In the United States, municipal solid waste (MSW) stream recycling operations collect plastic, glass, …
-
Computational and Experimental Comparison of the Effect of Porosity on the Piezoelectric Characteristics of Polyvinylidene Fluoride (PVDF) Thin Films
Polyvinylidene Fluoride (PVDF) is a piezoelectric polymer that is uniquely suited for biosensing applications due to its biocompatibility, sensitivity to changes in pressure, and simplicity to fabricate. PVDF thin films have shown potential in the application of hemodynamic flow sensing and …
-
Interfacial stability of perovskite solar cell layers
… heat, and moisture. The long term stability of organometal halide perovskite solar cells (PSCs) may be enhanced by understanding two interactions. The first is between the perovskite and the electron transport layer (ETL). The second is between the perovskite and the hole transport layer …
-
Comparative Analysis of Additive Manufactured Injection Molding Tools
Injection molding (IM) is a widely used manufacturing technique for thermoplastic materials. Typically, injection molding tools are made of metals such as steel or aluminum. The process to design and manufacture the metallic tooling is time consuming and requires a large capital investment. In the …
-
Development of an accelerated test method to determine the stress crack resistance of high-density polyethylene
… method that measures the slow crack growth (SCG) in High Density Polyethylene (HDPE). The NCLS test requires a notch on all test specimens to act as a stress concentration at that point so crack propagation can be easily predicted and studied. In addition to the notch, the NCLS test requires a …
-
Design, synthesis, and characterization of aluminum(III) porphyrins for use in artificial photosynthesis and as luminescent molecular thermometers, and the optimization of TiO2 photoanodes
Porphyrins with alkyl groups of varying lengths in the meso positions were synthesized and characterized as an economical alternative to octaethylporphyrin (OEP) in artificial photosynthetic systems. It was found that these porphyrins may serve as alternatives to OEP, offering comparable properties …
-
Multivariable Investigation Of Fused Deposition Modeling For Recycled Polylactic Acid
The growing issue of global plastic pollution creates an impetus to innovate processes that address this challenge. This research investigates the integration of a near-zero waste manufacturing process with mechanical recycling, in which 3D printed parts are ground and re-extruded into filament for …
-
Assessing Raw 264.7 migration in a mechanically-tunable 3D collagen-hyaluronic acid co-gel for use in Borrelia Burgdorferi pathology study
… associated with Lyme Disease, has been a topic of much research in recent decades, but it continues to prove difficult to understand how the bacteria interacts with the immune system on a cellular level, specifically macrophages. To aid in this work, a 3D hydrogel for cell culture was formulated …
-
Photochemistry of novel porphyrin-based photoelectrodes: towards solar fuel production
… provide a feasible strategy for the conversion ofsolar energy into chemical fuel. Central to the design of PECs is a photoelectrode which contains surface anchored dye molecules with the ability to 1) bind to a metal-oxide nanoparticle surface, 2) absorb light in the visible and ultraviolet …
-
An Investigation Into Ground Glass-Based Alkali Activated Cement For Use In High-Temperature Applications
… to conventional portland cement (PC) failing above 200°C. AACs demonstrate beneficial vitrification, and expansive foam properties different from PC. AACs are manufactured using a reactive aluminosilicate powder mixed with concentrated alkali solution to dissolve and polymerize …
-
Advancing textile circularity: mechanically recycling fibers for manufacturing nonwoven landscaping mats and yarns
The thesis explores the mechanical recycling of post-consumer textiles using the Fiber Shredder, a patent-pending technology developed at the University of Minnesota Duluth. Discarded garments were processed to recover usable fibers, which were then turned into both nonwoven landscaping mats use …
-
Experimental Investigation of Geometric Effects on Piezoelectric Energy Harvesting Under Mechanical Vibration and Water Flow
The increasing demand for self-powered sensing systems has created a need for energy harvesting technologies capable of converting ambient environmental energy into usable electrical power. Among the various transduction mechanisms available, piezoelectric energy harvesting has emerged as a …
-
Fabrication and characterization of flexible piezoelectric thin films from polyvinylidene fluoride and polylactic acid composites for biocompatible energy harvesting
Piezoelectricity is the phenomenon where certain materials exhibit electric charge accumulation and polarization in response to mechanical deformation. The reverse is also true for such materials, as applying an electric voltage can cause them to change shape. Piezoelectric materials have their …
-
Evaluation of triphenylamine (TPA) appended porphyrins as light-harvesting arrays for artificial photosynthesis
TPA-based porphyrins have been synthesized to study the charge transfer character as a function of the oxidation state. The central atoms, elements from the 3rd period: Mg(II), Al(III), Si(IV), and P(V), were the source of varying oxidation states. For comparison purposes, Sb(V) was also chosen. …