Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 270 for “"Material Testing"”.

  1. Automated material testing

    Abstract The integration of robotic systems into materials testing laboratories is increasingly recognized for its potential to enhance throughput and achieve high-precision experimental measurements. At the Volvo Cars facility, an automated 3-point bending test cell was developed to enable …

    chalmers Repository record for Automated material testing (opens in a new tab)

  2. Anode material testing in a vacuum diode

    … the operation of the vircator. Multiple anode materials have been tested, with measurements made of both the quantity and types of gases evolved during firing. The test materials include stainless steel, copper tungsten, tantalum, nickel,molybdenum, and oxygen-free high-conductivity copper. For …

    ttu Repository record for Anode material testing in a vacuum diode (opens in a new tab)

  3. Small-scale Controlled Blast Facility for Material Testing

    In our modern society, many explosive materials are used for different purposes. Blasts produced by explosive materials are encountered in building demolition, rock excavation, mining, and military contexts. Regardless of the source or intended use of an explosive, human exposure to the aftermath …

    concordia Download PDF for Small-scale Controlled Blast Facility for Material Testing (opens in a new tab)

  4. Anode Material Testing for Marine Sediment Microbial Fuel Cells

    … the comparison of power production from anode material with differing surface area and porosity properties, and secondly, to detect and relatively quantify the exoelectrogenic bacteria that may form biofilms on the anode material. A test tank was used to compare the different types of anode …

    usm Repository record for Anode Material Testing for Marine Sediment Microbial Fuel Cells (opens in a new tab)

  5. Homogenisation of embossed aluminium sheets using virtual material testing

    … analysis of the embossed structure, a virtual material model is developed in this thesis using homogenisation. This model describes the averaged macroscopic behaviour and enables the embossed sheet to be modelled as a at structure. The applied homogenisation method used to characterise the e …

    chalmers Repository record for Homogenisation of embossed aluminium sheets using virtual material testing (opens in a new tab)

  6. Defining structurally acceptable properties of high-strength steel bars through material testing

    Low-cycle fatigue tests were performed on reinforcing bars in order to assess the acceptability of newly developed high-strength reinforcing bars in seismic applications. The steels tested are classified as grade 60 A706, grade 80 A706, grade 80 A615, and grade 100. The high-strength reinforcing …

    texas Repository record for Defining structurally acceptable properties of high-strength steel bars through material testing (opens in a new tab)

  7. The Reemergence of a Geotechnical, Special Inspection, and Construction Material Testing Firm

    … special inspection, and construction materials testing firm in Southern California. Starting in January 2020, the engineering manager assumed responsibility of a branch with recurring years of poor financial performance and struggling to remain purposeful and viable. A lack of …

    tamu Repository record for The Reemergence of a Geotechnical, Special Inspection, and Construction Material Testing Firm (opens in a new tab)

  8. Development of Interactive Software to Control An Electro-Hydraulic Material Testing System

    … controlled multi - motion Electro-hydraulic Material Testing System (MTS), which is located in the biomechanics lab at the Veterans Administration Medical Center, will be used to conduct these kinds of experiments. This MTS is a unique, custom built hardware and no software has ever been …

    marquette Repository record for Development of Interactive Software to Control An Electro-Hydraulic Material Testing System (opens in a new tab)

  9. The Design, Construction, Testing and Evaluation of a Strength-of-Material Testing Device

    … purpose of this study was to design, construct, testing and evaluate a strength-of-materials testing device to be used as an appropriate aid to instruction in industrial arts education. In addition to providing a suitable testing device specifically the criteria of size, economy, simplicity of …

    sdstate Repository record for The Design, Construction, Testing and Evaluation of a Strength-of-Material Testing Device (opens in a new tab)

  10. Pneumatic servo-controlled material testing device capable of operating at high temperature water and irradiation conditions

    Special requirements set for the constructional materials used in energy production have strongly influenced the challenges in the component design work. Many material parameters such as corrosion, fracture mechanics, fatigue and oxide films are needed as input data for such work. The generation of …

    aalto Repository record for Pneumatic servo-controlled material testing device capable of operating at high temperature water and irradiation conditions (opens in a new tab)

  11. The identification of metallurgical and material testing competencies desirable for employment levels in metal manufacturing industries with implications for curriculum development

    … (1) to identify specific metallurgical and material testing competencies that are desirable for employment levels in metal manufacturing industries and (2) to place the identified competencies in priority of perceived importance for use in educational training programs.</p><p>A team of six …

    utk-theses Repository record for The identification of metallurgical and material testing competencies desirable for employment levels in metal manufacturing industries with implications for curriculum development (opens in a new tab)

  12. Development and Characterization of a High-Speed Material-Testing Machine, and Experimental Analysis of Frictional Flash Heating and Dynamic Weakening in Rock

    … dissertation, a novel High-Speed Biaxial (HSB) testing machine capable of imposing steps from quasi-static (1 mm.s¯¹) to seismic (1 m.s¯¹) sliding-rates has been developed and characterized. The HSB can achieve steps to seismic sliding-rates in only a few milliseconds under loads as high as 0.5 …

    tamu Repository record for Development and Characterization of a High-Speed Material-Testing Machine, and Experimental Analysis of Frictional Flash Heating and Dynamic Weakening in Rock (opens in a new tab)

  13. Development of Control Setup for a Material Testing Machine and Experimental Analysis of the Effect of Void Volume Fraction on the Strength of Recycled High-Density Polyethylene Material

    … of the research, it has been determined that material characterization of the beams is needed, and toward this end an MTS (Materials Test Systems) testing machine has been purchased by the TAMU Ocean Engineering Department. The testing machine was used for the purpose of testing recycled …

    tamu Repository record for Development of Control Setup for a Material Testing Machine and Experimental Analysis of the Effect of Void Volume Fraction on the Strength of Recycled High-Density Polyethylene Material (opens in a new tab)

  14. Effect of Latex Modified Concrete Overlays With Reduced Surface Preparation on the Load Distribution and Flexural Strength of Channel Girders

    … The research conducted in this thesis involved material testing of several different LMC mixes and flexural testing of an LMC overlay and girder system. The material testing was used to determine a reasonable LMC mix design and surface preparation method to be used for the overlay. Based on …

    clemson Repository record for Effect of Latex Modified Concrete Overlays With Reduced Surface Preparation on the Load Distribution and Flexural Strength of Channel Girders (opens in a new tab)

  15. Laser cutting and etching textiles and apparel design: an experimental study on the implementation and documentation of laser cutting and etching in the apparel design creative process

    … at an exponential rate, but standard material testing for cutting and etching different textiles has been minimally documented. There were three primary objectives that comprise the purpose of this research which were to: (a) perform material testing to document and create a user …

    iastate Repository record for Laser cutting and etching textiles and apparel design: an experimental study on the implementation and documentation of laser cutting and etching in the apparel design creative process (opens in a new tab)

  16. Evaluation of loggerhead sea turtle carapace properties and prototype biomimetic carapace fabrication

    … research include the development of experimental testing procedures for the material characterization of the loggerhead carapace, and the design, fabrication, and evaluation of an artificial prototype carapace. A photographic database of wounded sea turtles in Georgia was evaluated in order to …

    gatech Repository record for Evaluation of loggerhead sea turtle carapace properties and prototype biomimetic carapace fabrication (opens in a new tab)

  17. Identification of dynamic properties of materials for the nuclear waste package

    … to experimentally identify dynamic properties of materials for the nuclear waste container; The implementation of the project involves a number of steps. First, candidate materials for the nuclear waste package were identified. Literature review showed that the behavior of these materials under …

    unlv Repository record for Identification of dynamic properties of materials for the nuclear waste package (opens in a new tab) Download PDF for Identification of dynamic properties of materials for the nuclear waste package (opens in a new tab)

Page 1 of 14