Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 69 for “"Material fatigue"”.

  1. Fatigue analysis of aluminum components in powertrain mounts

    … during their operational life. Despite this, no fatigue analysis has previously been carried out of the studied components. The main aim of this study was therefore to create a method for analyzing fatigue in aluminum components in powertrain mounts. A bracket in the powertrain mounts system made …

    chalmers Repository record for Fatigue analysis of aluminum components in powertrain mounts (opens in a new tab)

  2. Practical Aspects of Assessing Nonlinear Ultrasonic Response of Cyclically Load 7075-T6 Aluminum

    … relation of the ultrasonic waves due to material fatigue damage or degradation, the spectral analysis techniques such as the power spectrum, bispectrum, and bicoherence spectrum are applied. The ultrasonic nonlinearity parameters by Cantrell and Jhang are introduced and presented as a …

    vt Repository record for Practical Aspects of Assessing Nonlinear Ultrasonic Response of Cyclically Load 7075-T6 Aluminum (opens in a new tab)

  3. The effect of surface treatment and rolling direction on the fatigue behavior of grade one commercially pure titanium

    Fully-reversed bending fatigue tests were conducted on both the as-received and finished grade one commercially pure titanium. Finishing is done by a process developed by TiMesh Inc., and known as TiMesh finishing. Results show that TiMesh finishing can not only increase material fatigue life at …

    unlv Repository record for The effect of surface treatment and rolling direction on the fatigue behavior of grade one commercially pure titanium (opens in a new tab) Download PDF for The effect of surface treatment and rolling direction on the fatigue behavior of grade one commercially pure titanium (opens in a new tab)

  4. Monotonic and cyclic behaviour of slender dowell-type fasteners in wood-steel-wood-connections

    … head behaviour, hole tolerances and fastener material fatigue. Testing results illustrated a direct influence of the head type on the monotonic as well as cyclic load-deformation behaviour of the tested fasteners. Strength and stiffness increases were observed with increasing head resistance. …

    ubc Repository record for Monotonic and cyclic behaviour of slender dowell-type fasteners in wood-steel-wood-connections (opens in a new tab) Download PDF for Monotonic and cyclic behaviour of slender dowell-type fasteners in wood-steel-wood-connections (opens in a new tab)

  5. Widefield NV-center quantum sensing for non-destructive materials testing

    Material fatigue is the main cause for failure in mechanical parts generating a huge economic loss every year. Non-destructive testing aims to prevent material failure by assessing the material fatigue state without causing any damage. Most nondestructive testing methods are designed for relatively …

    freiburg-diss Repository record for Widefield NV-center quantum sensing for non-destructive materials testing (opens in a new tab)

  6. EFFECT OF ISOTHERMAL AGING ON SAC305 HARMONIC VIBRATION DURABILITY

    … from FEA are used to estimate lower-bound material fatigue curves for SAC305 solder materials, as a function of isothermal pre-aging.

    maryland Repository record for EFFECT OF ISOTHERMAL AGING ON SAC305 HARMONIC VIBRATION DURABILITY (opens in a new tab)

  7. Lazeriu indukuojamas nuovargio efektas: optinių dangų išgyvenamumo skirstinių tyrimas /

    … of pulses used for radiation due to optical fatigue effect. LIDT measurements are usually done by doing S-on-1 tests described in ISO 21254-2 standard. However, due to measurement time limitations S-on-1 tests are performed for small number of pulses, therefore, extrapolation model is used to …

    vilnius Repository record for Lazeriu indukuojamas nuovargio efektas: optinių dangų išgyvenamumo skirstinių tyrimas / (opens in a new tab)

  8. Linking Enhanced Fatigue Life to Design by Modifying the Microstructure

    Structural material fatigue is a leading cause of failure and has motivated fatigue-resistant design to eliminate risks to human lives. Intrinsic microstructural features alter fatigue deformation mechanisms so profoundly that, essentially, fatigue properties of structural materials become deviant. …

    unt Repository record for Linking Enhanced Fatigue Life to Design by Modifying the Microstructure (opens in a new tab)

  9. FLUID STRUCTURE INTERACTION OF UNDULATING FLUID FLOW IN FLEXIBLE TUBING WITH PARTIAL CONSTRICTIONS

    … cyclic hoop stresses, leading to increased material fatigue and premature failure. This study investigates the fluid structure interaction of constricted undulating fluid flow through flexible tubing by observing the Von Mises stress alterations of the flexible tube structure and the fluid …

    nps Repository record for FLUID STRUCTURE INTERACTION OF UNDULATING FLUID FLOW IN FLEXIBLE TUBING WITH PARTIAL CONSTRICTIONS (opens in a new tab)

  10. Flexural Fatigue Behaviour of Corroded Pretensioned Beams and Their Repair Using Carbon Fibre Reinforced Polymer Sheets

    … in this thesis investigated the flexural fatigue behaviour of non-corroded and corroded pretensioned beams and examined the use of externally bonded Carbon Fibre Reinforcement Polymer (CFRP) sheets as a repair technique aimed at restoring the loss in capacity due to corrosion. This was …

    waterloo Repository record for Flexural Fatigue Behaviour of Corroded Pretensioned Beams and Their Repair Using Carbon Fibre Reinforced Polymer Sheets (opens in a new tab)

  11. Elevated Temperature Fatigue for AISI 4340 Steel

    … of large caliber cannon tubes is the effects of material fatigue. Fatigue of cannon tube material results from the cyclic hoop stresses that result from the high pressure inside the cannon tube during firing. Extensive research has been conducted regarding the effect of stress level on the …

    sdstate Repository record for Elevated Temperature Fatigue for AISI 4340 Steel (opens in a new tab)

  12. Advanced lifetime prediction and accelerated fatigue testing for heat-treated steel materials using Machine Learning and probabilistic methods

    Steel is a predominant material in many areas of mechanical engineering due to its outstand-<br>ing mechanical properties, machinability and cost efficiency. The increasing global demand<br>for steel and the simultaneously rising requirements for sustainability in terms of the circular<br>economy …

    freiburg-diss Repository record for Advanced lifetime prediction and accelerated fatigue testing for heat-treated steel materials using Machine Learning and probabilistic methods (opens in a new tab)

  13. Modeling Fatigue Behavior of 3D Printed Titanium Alloys

    … cycles lead to the formation of strain in the material which causes initiation of the crack formation this phenomenon is called fatigue. Fatigue properties are critical for structures subject to cyclic load; hence fatigue analysis is used to predict the life of the material. Fatigue analysis …

    iupui Repository record for Modeling Fatigue Behavior of 3D Printed Titanium Alloys (opens in a new tab)

  14. In vitro Investigation of Mechanical Properties of Latest-Generation CAD-CAM Composites

    … Design/Computer-Aided Manufacturing (CAD-CAM) materials for dental prostheses: fractures and debonding from titanium implant abutment (Ti-base). Specifically, the work focused on evaluating the mechanical performance of latest generation CAD-CAM composites compared to established lithium-based …

    liege Repository record for In vitro Investigation of Mechanical Properties of Latest-Generation CAD-CAM Composites (opens in a new tab) Restricted access

  15. Rotordynamic and Erosion Study of Bearings in Electrical Submersible Pumps

    … better understand the rotordynamic behavior and material fatigue of the bearings/seals in ESPs, a vertical bearing/seal test rig is built. The test rig simulates the motion of rotating components in a WJE-1000 ESP and conducts multi-phase erosion experiments efficiently with water, air and sand. …

    tamu Repository record for Rotordynamic and Erosion Study of Bearings in Electrical Submersible Pumps (opens in a new tab)

  16. Numerical simulation of out-of-plane distortion fatigue crack growth in bridge girders

    … country. Structural deficiencies can result from material fatigue caused by cyclical loadings leading to localized structural damage. While fatigue crack growth is viewed as a serviceability problem, unstable crack growth can compromise the integrity of the structure. Multi-girder bridges designed …

    colostate Repository record for Numerical simulation of out-of-plane distortion fatigue crack growth in bridge girders (opens in a new tab)

  17. Thermography Detection on the Fatigue Damage

    … new methods to <em>in-situ</em> “watch” the material fatigue-damage processes so that in-time reparations will be possible, and failures or losses can be minimized to the maximum extent. Realizing that temperature patterns may serve as fingerprints for stress-strain behaviors of materials, a …

    utk-theses Repository record for Thermography Detection on the Fatigue Damage (opens in a new tab)

  18. In Situ Measurement Of Fatigue Induced Crack Growth In Inconel 718 Using Direct Current Potential Drop Method

    … these engines, it is necessary to understand how material fatigue failures occur at these new, higher operating temperatures. In providing understanding, the following fundamental study focuses on the statistical nature of crack jumps (changes in crack length over time) during fatigue in a …

    wvu Repository record for In Situ Measurement Of Fatigue Induced Crack Growth In Inconel 718 Using Direct Current Potential Drop Method (opens in a new tab)

Page 1 of 4