Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 43 for “"Material hardness"”.

  1. Constitutive Modeling and Experiments for the Micro and Nano Behaviors in Metals

    … size effect (ISE), is investigated for metal materials. The ISE is believed to be related with the strain gradient at small indentation depths. Geometrically necessary dislocations (GNDs) are formed in order to accommodate the strain gradient, which results in the increase in the material …

    lsu-thes Repository record for Constitutive Modeling and Experiments for the Micro and Nano Behaviors in Metals (opens in a new tab)

  2. Performance and Usability of Flexible Membrane Keyboards

    … flexible keyboards that differed in terms of material hardness (hard, medium, or soft) and key contact point shape (circular or square) were studied. The results supported the hypothesis that both typing performance and usability of the flexible membrane keyboard were affected by material …

    vt Repository record for Performance and Usability of Flexible Membrane Keyboards (opens in a new tab)

  3. Modeling Friction between Metals in Dry Contact Following Run-In

    … friction of nominal pressure, surface roughness, material hardness, surface adhesion and entrapped debris.

    ucf Repository record for Modeling Friction between Metals in Dry Contact Following Run-In (opens in a new tab)

  4. Machinability of stainless steel alloys

    … chip formation. A great emphasis is put on the materials interactions with the machining process. For these machining tests, specimens were machined under different cutting parameters using the same tool in order to develop a global approach to predict the machining behaviour (surface roughness, …

    ets-quebec Download PDF for Machinability of stainless steel alloys (opens in a new tab)

  5. Plastic Anisotropy of Complex Crystals and Hierarchically Structured Alloys Using Micro-Mechanical Computational Analysis

    <p>The material anisotropy is one of the most important material properties that cannot be disregarded in today’s world of materials designing and manufacturing. As new materials being developed and new material demands are introduced the inevitable focus on anisotropic materials has been brought …

    utk-theses Repository record for Plastic Anisotropy of Complex Crystals and Hierarchically Structured Alloys Using Micro-Mechanical Computational Analysis (opens in a new tab)

  6. The Biology of Spaeroma Terebrans in Lake Pontchartrain, Louisiana with Emphasis on Burrowing

    … population may be parthenogenic and that wood or material hardness determines whether S. terebrans burrow when given a choice of substrates. The lake shoreline near the Bonnet Carre Spillway is retreating and the presence of S. terebrans contributes to shoreline erosion by weakening and destroying …

    uno Repository record for The Biology of Spaeroma Terebrans in Lake Pontchartrain, Louisiana with Emphasis on Burrowing (opens in a new tab)

  7. MATERIAL PERSPECTIVE AND CUTTING EDGE RADIUS EFFECT ON ULTRA-PRECISION MACHINING PROCESS

    … and even approach the nanoscale. At this range, material-related issues are gaining importance due to the microstructural effect on the tool-work interaction phenomena. Thus, based on the material hardness, an innovative technique has been established for the rapid characterization of machined …

    nus Repository record for MATERIAL PERSPECTIVE AND CUTTING EDGE RADIUS EFFECT ON ULTRA-PRECISION MACHINING PROCESS (opens in a new tab) Download file for MATERIAL PERSPECTIVE AND CUTTING EDGE RADIUS EFFECT ON ULTRA-PRECISION MACHINING PROCESS (opens in a new tab)

  8. High strain rate-induced failure in steels at high shear strains

    Materials deformed at high strain rates exhibit sometimes the behaviour that is very different from that at static or quasi-static loading. Material and physical properties that are of no concern in low strain rates become crucial in the material response at high strain rates. Material properties …

    manitoba Repository record for High strain rate-induced failure in steels at high shear strains (opens in a new tab)

  9. PHYSICAL PROPERTY STUDIES OF FUSED DEPOSITION MODELING SHAPED CHARGE LINERS

    … of theoretical maximum density (TMD) for copper. Material physical properties including density, stress-strain relationships (at varied strain rates), material hardness, and shock impact studies to determine the Hugoniot equation of state for the 3D printed, sintered samples. A final investigative …

    nps Repository record for PHYSICAL PROPERTY STUDIES OF FUSED DEPOSITION MODELING SHAPED CHARGE LINERS (opens in a new tab)

  10. Effect of Cryogenic Treatment on the Mechanical Properties of Nickel-Titanium Shape Memory Alloys

    … alloys. Mechanical testing including tensile and hardness were carried out after having undergone various cryogenic temperature treatment conditions, and the results were compared. Experimental results showed an increase in material hardness was observed when compared to untreated materials. With …

    concordia Download PDF for Effect of Cryogenic Treatment on the Mechanical Properties of Nickel-Titanium Shape Memory Alloys (opens in a new tab)

  11. Laser waterjet heat treatment on super-hard materials

    … (LWH) treatment process to develop super-hard materials is a new field of research that has the potential to develop materials with hardness characteristics that compare with or exceed that of diamond. The research presented in this dissertation investigated the hardness improvement mechanism …

    iastate Repository record for Laser waterjet heat treatment on super-hard materials (opens in a new tab)

  12. Evaluating How Acidic Solutions Affect the Microhardness of Bioceramic Sealers

    … can be measured by their influence on the microhardness of BCS. Microhardness can be used as an indirect measurement of material hardness. The purpose of this study was to investigate the microhardness of BCS when placed in contact with various acidic solutions to assess their potential use as a …

    vcu Repository record for Evaluating How Acidic Solutions Affect the Microhardness of Bioceramic Sealers (opens in a new tab)

  13. Post-fire Mechanical Properties of Aluminum Alloys and Aluminum Welds

    … Post-fire exposure is considered heating the material to a particular temperature then cooling the material back to room temperature. The research included evaluating parent materials as well as welded samples. Post-fire mechanical properties of parent materials were evaluated at temperatures …

    vt Repository record for Post-fire Mechanical Properties of Aluminum Alloys and Aluminum Welds (opens in a new tab)

  14. Improving the quality of high alloy CA6NM stainless steel castings

    … first study was to investigate claims that CA6NM hardness could be held below Rockwell C (Rc) 23 as per NACE requirements using an ice water quench. This research was performed on three grades of CA6NM, namely, A487 Class A, A487 Class B and A743 in both as-received and as-cast conditions. A …

    iastate Repository record for Improving the quality of high alloy CA6NM stainless steel castings (opens in a new tab)

  15. Microwear Patterns on Experimental Cache Creek Basalt Tools

    … scar attributes, use action and contact material hardness are more clearly understood. In addition, mlcropolish characteristics have been related to contact material, duration of use and tool action in a seven-stage developmental model. Distinctive microwear patterns resulting from …

    sask Repository record for Microwear Patterns on Experimental Cache Creek Basalt Tools (opens in a new tab)

  16. Interface Characterization of Explosively Bonded Gun Tubes

    … given to the South Dakota State University - Material Evaluation and Testing Laboratory (METLab) by the U.S. Army Benet Laboratory (ABL) in partnership with the Department of Defense (DOD). Explosively bonded gun tubes are used in many applications within the DOD, thus bond characterization is …

    sdstate Repository record for Interface Characterization of Explosively Bonded Gun Tubes (opens in a new tab)

  17. A Monolithic Internal Strain-Gage Balance Design Based on Design for Manufacturability

    … EDM is chosen due to several factors, including material hardness, surface finish, and complex geometry, including blind cuts. The new balance design objectives require no blind cuts, and offered a significant reduction in fabrication time, sufficient stiffness, and an acceptable level of …

    odu Repository record for A Monolithic Internal Strain-Gage Balance Design Based on Design for Manufacturability (opens in a new tab)

  18. Effects of Phase Decomposition on the Strength Of CoCrFeMnNi High Entropy Alloy

    … high entropy alloy (HEA) serves as a model material that researchers can utilize to gain better understanding of HEA-specific characteristics. When considering CoCrFeMnNi and other HEAs for load-bearing applications, it is necessary to understand possible phase decomposition and its …

    clemson Repository record for Effects of Phase Decomposition on the Strength Of CoCrFeMnNi High Entropy Alloy (opens in a new tab)

  19. Longitudinal Effects of Sex-Based Shoe Design on the Biomechanics of Basketball Specific Movements

    … (PAS) ratings via a 4-point Likert scale. Shoe material hardness testing was conducted via Shore-A durometer. Initial results showed increased TS and anterior-posterior GRFs with higher PAS during cutting in the FS compared to the US shoe. Long-term usage of both shoes resulted in increased TS …

    brock Repository record for Longitudinal Effects of Sex-Based Shoe Design on the Biomechanics of Basketball Specific Movements (opens in a new tab)

  20. Retrogression-reaging and hot forming of AA7075

    … retrogressing at 200 °C producing the hardest material after reaging by the PBC. The formability of AA7075-T6 during RRA forming was evaluated by tensile testing at 200 and 225 °C. Ductility of AA7075-T6 at RRA forming temperatures was double compared to those produced at room temperature. RRA …

    texas Repository record for Retrogression-reaging and hot forming of AA7075 (opens in a new tab)

Page 1 of 3