Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 63 for “"Material modelling"”.
-
Material Modelling for Structural Analysis of Polyethylene
… to develop a practical method for constitutive modelling of polyethylene, based on a phenomenological approach, which can be applied for structural analysis. Polyethylene (PE) is increasingly used as a structural material, for example in pipes installed by trenchless methods where relatively low …
-
Mechanical material modelling and characterisation of Li-ion battery
… reliable batteries. This study focuses on the material modelling of lithium-ion battery cells to enhance their safety and performance under mechanical loads. Initially, a linear elastic model was employed as a preliminary approach to develop the modelling strategy. Subsequently, hyperelastic …
-
Mechanical Testing and Material Modelling of Rigid Polyurethane Foam, a Bone Surrogate
… to develop and calibrate the hyperelastic Ogden material model, for 20 PCF and 30 PCF PU foam, in ABAQUS and perform a sensitivity analysis on a uniaxial compression FEA model. The third objective was to develop and calibrate the crushable foam plasticity (CFP) model, for 20 PCF and 30 PCF PU …
-
Implicit coupled constitutive relations and an energy-based method for material modelling
The contributions of this thesis are an implicit modelling method for the coupled constitutive relations and an energy-based method for material modelling. The two developed methods utilise implicit models to represent material constitutive relations without the requirement of physical parameters. …
-
Dual-material modelling with uniformly distributed embedment elements for wire-arc additive manufacturing
A dual-material model has been developed for wire-arc additive manufacturing (WAAM), focusing on strategies to embed secondary material elements uniformly in the surface layers of engineering parts. The embedment should distribute within the top surface layer of a component in a controlled manner, …
-
Validation of hygrothermal material modelling under consideration of the hysteresis of moisture storage
… is significantly dependent on the applied material functions. These functions are determined by the material modelling marking the connection between the basic storage and transport parameters which are obtained from basic measurements, and the storage and transport coefficients which are …
-
Material modelling of rubber coated fabrics employed in the design of innovative ship rescue systems
The computational modelling of pneumatic structures requires accurate and numerically robust representation of the mechanical response of the composite system used in their fabrication. In this thesis, a new constitutive law isdeveloped for describing the mechanical behaviourof rubber coated …
-
Multi-level material modelling for the study of plastic anisotropy of DC04 steel under multiple load cycles
… complex mechanism. Simulations with polycrystal material modeling provide detailed insight into the material characteristics. However, sheet-bulk metal forming is a complicated process that needs comprehensive information on strain history and complex loading states before and during service …
-
Age-Dependent Material Modelling of the Human Cranium: Predicting Cortical Bone Response Using Bayesian Networks and Experimental Validation
… element head models used in fracture prediction. Material properties were derived from experimental data by Wood (1969), which included tensile tests on post-mortem human subjects (PMHS) across a wide range of ages. A Bayesian statistical model was developed in order to analyse the influence of …
-
Micromechanics-Based Analysis of Fiber-Reinforced Laminated Composites
A procedure for three-dimensional nonlinear material modelling of fiber-reinforced laminated composites is presented. The material modelling procedure has a two-level hierarchical structure. At the bottom level, constitutive information about the fiber and the matrix phases are synthesized using a …
-
Using MELCOR with enhanced predictive capabilities via Thermochimica to model two severe accident cases of a generic BWR with Zry-2 and FeCrAl
… goal of this work was to enhance MELCOR’s material modelling capabilities via one-way coupling of Thermochimica. MELCOR is a state-of-the-art code used to simulate the severe accident progression of a nuclear power plant. The first objective was developing the capabilities in Thermochimica …
-
Investigation of nonlinear crack tip deformation including the effects of unsymmetric spatial variations of material properties
An extensive investigation of non-uniform material effects on static fracture analyses is undertaken. Included in the study are theoretical, experimental and numerical techniques of focusing attention on the nonsymmetric deformation fields around a crack tip in a non-uniform yield strength varying …
-
Ultrasonic vibration-assisted incremental forming
… some limitations—such as forming high-strength materials, surface quality and dimensional accuracy—have hindered its applications in industry. To solve these problems, this study introduces ultrasonic vibration (UV) to IF—titled ultrasonic vibration-assisted incremental forming (UVAIF). Material …
-
Atomistic simulations of nanoscale molecular and metal oxide junctions
… of new devices, accurate and efficient atomistic material modelling methods are crucial for guiding experiments. In this thesis first principle material modelling (e.g Density Functional Theory) is combined with the atomistic Non Equilibrium Green’s Function quantum transport method to study how …
-
Integrating Structural Fire Analysis with Hybrid Fire Testing: A Framework for Enhanced Stability, Software development and Full-Scale Evaluation.
… constrained by uncertainties in high-temperature material behaviour and difficulty representing realistic restraint. As a result, system-level fire response is still poorly understood. This thesis addresses these limitations through four integrated research contributions spanning Hybrid Fire …
-
Statistical modelling of the transition toughness properties of low alloy pressure vessel steels
… and irradiation damage response of the material. Modelling of the inherent scatter of toughness measurements has received much academic interest since the mid-twentieth century and is found to be dependent on a number of metallurgical factors and failure modes; therefore, the …
-
Analysis of Brazilian Split Cylinder Using the State Based Peridynamic Lattice Model
… years, does not handle such discontinuities. A material, as defined by continuum mechanics is that which is continuous and fills the space it occupies. Although this is a reasonable assumption for metals, it is an unrealistic notion for concrete. Stewart Silling invented peridynamics, which …
-
Computational homogenisation of cracked composite materials using ordinary state-based peridynamics
… effective characterisation of cracked composite materials with periodic microstructures. Conventional continuum methods face challenges in modelling discontinuities such as matrix cracking and fibre-matrix debonding, whereas peridynamics naturally accommodates such damage through its integral …
Page 1 of 4