Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 37 for “"Material particle"”.
-
Comparative analysis of lost circulation material particle size and degradation in drilling fluids
Lost Circulation Materials (LCM) are used to plug natural and induced fractures to minimize drilling fluid loss to formations. Various LCMs are available in field application, such as calcium carbonate and graphite. Design of the particle size distribution is crucial to successfully mitigate loss …
-
Coal related bed material agglomeration inpressurized fluidized bed combustion.
… of the six coals with sand and limestone as bed material. Ash components determined the ash thermodynamic behaviour at high temperature, and each component had different effects. For assessment of the potential for bed material agglomeration, the temperature at which 15% of the ash would become …
-
Mechanisms of film formation during micro-cold spray of ZnO ceramics
… sub-micron to micron-scale ceramic and metal particles to deposit patterned thick films at room temperature. Solid particles are entrained in inert gas to produce an aerosol and accelerated towards a substrate through a nozzle. The impulse for acceleration occurs by means of a pressure …
-
Novel preconcentration techniques for the determination of trace metal ions in environmental matrices
… phase. Rhizopus arrhizus (unlyophilized) packing material, particle size < 25 fjm exhibited the highest overall % recovery of Cu(II), > 90 % recovery was achieved. Surfactant enhanced adsorptive stripping voltammetry for trace level determination of aluminium in water and soil samples is reported …
-
Computational Modeling Of Shock Wave Propagation In A Layered Composites
… in terms of time history of GRP’s back surface material particle velocity, available in open literature [1], were utilized in the calibration of a continuum damage mechanics (CDM) model. The experimental data included D7 Tool Steel and 7075-T6 aluminum flyer plates and two different GRP …
-
Understanding interfacial phenomena for the creation of next-generation high-capacity battery electrodes
… Using magnetite as a model anode active material, this thesis aims to understand how interfacial phenomena at key interfaces of the composite electrode affect the various electrochemical processes that dictate battery performance of high-capacity next-generation electrodes. Three main …
-
Effect of binder on electrochemical performance of Silicon/Graphene anodes for Lithium ion batteries
… of properties in binders, a polymeric material used to bind the electrode components, and maintain the electrode integrity has been discussed. Moreover, the effect of silicon (active material) particle size on the electrochemical performance has been investigated. The results …
-
Hydraulic geometry relationships and the development of bankfull regional curves for Iowa streams
… geometry, longitudinal profile, and streambed material particle size distribution. Additionally, basin characteristics were assembled and analyzed for each reach. Bankfull discharge was then estimated for all gaged and ungaged reaches. Data analysis included two alternative stratification …
-
Unsaturated hydrology, evaporation, and geochemistry of neutral and acid rock drainage in highly heterogeneous mine waste rock at the Antamina Mine, Peru
… variable hydrology that is strongly dependent on material particle size distributions and especially the presence of large boulders. The hydrological regimes include wide ranges of velocities for matrix flow (<2-12 cm/day), preferential flow (40-2000 cm/day), and pressure-induced wetting fronts …
-
Assessment of waste rock weathering characteristics at the Antamina mine based on field cells experiment
… the analysis only of Class B marble and hornfels material. Particle size was measured through the standard sieving method and Elutriation techniques, and surface area through geometrical estimation and the BET methods. The data gathered was correlated with chemical assay results and complemented …
-
Defect identification in complex oxides: Positron annihilation spectroscopy of β-Ga₂O₃ and SrTiO₃
… stepping beyond the current state-of-the-art material, SiC, in high-power applications. Understanding of SrTiO3, a simple prototype perovskite material, can aid understanding the scientifically interesting perovskite material family. This work demonstrated how positron annihilation …
-
Fluid patterns, sediment pathways and woody obstructions in the Pine River, Angus, Ontario
… delineation of “zones” of fluid behaviour. Bed material particle size distributions showed differences within the obstruction zones as opposed to areas unaffected by the obstructions. Particle sizes tended to increase underneath both obstructions, indicating acceleration of fluid underpassing …
-
River channel stability and the implications for fish habitat
… Bed stability was measured by looking at bed material particle size distribution, cross-sectional channel profiles and control reach topographical surveys which included particle marking and tracking. Bedload transport rates at the confluence area were determined under varying flow conditions. …
-
Engineering aperodic nanostructured surfaces for scattering-based optical devices
… light scattering properties of resonant nanoparticles and nanostructured arrays. These arrays can be optimized through the choice of material, particle morphology and array geometry. In this thesis, by engineering the multi-frequency colorimetric responses of deterministic aperiodic …
-
THE MEASUREMENT OF INTER-PARTICLE DIFFUSION COEFFICIENTS IN MINE WASTES
… curves were measured using matrix-matrix material (<4.75 mm) from three mine sites: Faro Mine Complex, YT; the Detour Lake Gold Mine, ON; and Diavik Diamond Mine, NT, to examine the differences in matrix-material particle-size distribution among mine sites and the effect of particle-size …
-
Critical state, dilatancy and particle breakage of mine waste rock
Critical state, dilatancy and particle breakage characteristics of two mine waste rock (MWR) materials were systematically studied in drained isotropic and axisymmetric compression. A specimen preparation technique that simulated material dumping in the field was adopted and the technique is shown …
-
Discrete element simulation for the loading of a steep incline side wall conveyor
… due to damages caused by the constant spill of material during operation. A need was identified for a discrete element model that can simulate the loading point of the steep incline sidewall conveyor, and then used to evaluate possible design changes to reduce the spilled material percentage. …
-
Experimental investigation of the heat transfer coefficient to a horizontal tube submerged in bubbling fluidized bed
… the effect on varying the bed temperature, bed material, particle size and fluidization gas. Sand and ilmenite are the bed materials evaluated in this work and air, CO2, steam and flue gas are the tested fluidization gases. These have been tested at temperatures between 400-950 oC. The …
-
A Nonlocal Lattice Particle Method for Modeling HCP Polycrystalline Solids
Polycrystalline materials, composed of individual grains with varying grain size, shape, and crystallographic orientation are widely used in various engineering and industrial applications. Conventional applications of polycrystalline materials rely on the macroscopic performance, and the …
-
Χωρικές ανομοιομορφίες σε συσσωρευτές ιόντων λιθίου ηλεκτροκίνητων οχημάτων
… thickness direction and within the active material particle. In other words, it assumes that variations in electrochemical and thermal quantities in other directions are negligible, significantly simplifying the mathematical problem without substantially compromising the model’s accuracy …
Page 1 of 2