Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 432 for “"Material removal"”.
-
Electro-kinetically enhanced nano-metric material removal
… field activated abrasive particles to achieve material removal on a substrate. There are a few different goals for this project. The first goal is to prove through visualization that particle movement can be influenced and controlled by changes in electric field. The second goal is to …
-
Material Removal Control for Teleoperated Robotic Sanding
… it difficult to effectively control the depth of material removed. For this reason it is desirable to automatically control the rate of material removal. However, existing methods for controlling the rate of material removal are not compatible with teleoperation as the path of the sander, and the …
-
Performance Characteristics of Circular Brushing Tools (Material Removal)
… brushing are briefly outlined and discussed. The material removal capabilities for orthogonal brush-workpart contact are determined for several ranges of brush speeds, penetration depths, contact revolutions and filament tip geometry. Finally, a discussion on brush force and material removal …
-
Material Removal Rate Control for a Teleoperated Robotic Sander
… To address this issue, a model of the sanding material removal rate is derived and experimental parameters are estimated. Furthermore, this model can be used to determine the normal force required to maintain a consistent material removal rate. A controller is then designed, implemented, and …
-
A STUDY OF MATERIAL REMOVAL MECHANISM IN VIBRATION ASSISTED MACHINING
This thesis aims to investigate the cutting mechanism for both one-dimensional (1D) and two-dimensional (2D) vibration assisted machining (VAM). An energy-based model has been developed in 1D VAM to predict the equivalent shear angle and determine the amount of compression of chips. A variety of …
-
Investigating Material Removal Mechanisms in Aero-engine Turbine Fin Seals
… engine casing. An understanding of the material removal mechanism by which this occurs is necessary to achieve better sealing performance. In this work series of tests was conducted on a high-speed test rig capable of achieving fin tip speeds between 100 and 200m/s. The mechanism by …
-
Material Removal Mechanisms in Machining Particulate-reinforced Metal Matrix Composites
… were widely assumed as an equivalent homogeneous material (EHM), or the particles were simplified to be rigid with uniform distribution, which is seriously violated the nature of the composite microstructure and real material removal process. To solve this problem, comprehensive modelling of …
-
Examination of the Material Removal Rate in Lapping Polycrystalline Diamond Compacts
… understanding of the parameters that affect the material removal rate (MRR) and MRR uniformity of lapped PDC samples. Experiments that focused on several controllable lapping parameters were performed to determine to what extent they affected the process. It was determined that the MRR can be …
-
Investigation of Granular Fluid Properties and Material Removal in Vibratory Finishing
… be addressed in part by exploring the basics of material removal and factors which influence it with the ultimate intent of improving the efficiency and effectiveness of vibratory mass finishing. The mass finishing process has been incrementally improved over time. The known variables of concern …
-
Objective surface inspection and semi-automated material removal for metal castings
… this method, the operator identifies the excess material that needs to be ground and marks it with colored markers on the casting. The casting is then placed in a robotic cell that only requires the casting to be secured and but not the need for exact fixturing. A 3D scanner with a color camera …
-
Characterization of material removal in the course of abrasive waterjet (AWJ) machining
… of the technique for prediction of the rate of material removal in the course of abrasive waterjet (AWJ) machining. A new parameter, Exergy Distribution Density (EDD), is introduced and used in order to characterize the cutting conditions. EDD, determined as the kinetic energy of particles …
-
Modeling and control of material removal and defectivity in chemical mechanical planarization
… have been deterministic, accounting for material removal by a single isolated particle. These models predicted the quality control parameters such as material removal rate and planarization at global scales. Recently, probabilistic models have been developed to describe material removal …
-
Yield improvement in chemical mechanical planarization via material removal variation on a surface
… facilities world wide. Among various surface material removal processes, CMP process is primed for its ability to obtain both local and global planarity on a given surface. The model developed by Fu and Chandra et al, calculates the dishing height based on MRR equations. The model provides a …
-
Stochastic models for material removal rate (MRR) in chemical mechanical planarization (CMP) process
… previous work related to the prediction of the material removal rate (MRR) in CMP process to date has been concerned with the ideal case, wherein there is no randomness associated with either the pad or the slurry. In the work of this dissertation, we investigated the material removal rate (MRR) …
-
Pose estimation and material removal study of a non-rigid endoscopic machining tool
… way to quantitatively (precisely) remove material from work pieces in hard-to-reach cavities, such as turbine blades in a jet engine. There is a need to be able to smooth the cracks from the turbine blades with a controlled amount of material removal. Endoscopy is useful for navigating and …
-
Characteristics of Material Removal by Ceramic Media on Metallic Coupons for Mass Finishing Applications
… dissertation introduces a fundamental concept of material removal by scratches made by ceramic media on metallic coupon as the basis for material removal by Mass Finishing process. Mass Finishing is a group o f surface improvement operations such as polishing, descaling, burnishing, cleaning, and …
Page 1 of 22