Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 269 for “"Materials Processing"”.
-
Ultrasoft magnetic materials processing and characterisation
… characterise and test post-processed magnetic materials used for in-package or on-chip devices such as micro-inductors. The electrochemical post-processing has been shown to improve the magnetic properties of the NiFe alloy. The aim of this research was further to test this process on alloys …
-
Inauditus materials processing through surface asymmetries
<p>Surfaces of materials are an enigma, whereas they are both familiar and foreign to the scientific community. Due to its size and metastable nature, analysis of native material surfaces poses a great scientific and technological challenges. Throughout decades of research, incoherencies in the …
-
BETA GALLIUM OXIDE MATERIALS PROCESSING AND DEVICE APPLICATIONS
… and SiC for power efficiency. However, material processing is still in its infancy for high-performance devices fabrication. In this work, I explore different regions of processing conditions. Particularly, dry etching and Ohmic contact are studied and optimized for device fabrication. Electronic …
-
Transport in Low Pressure Plasma Reactors for Materials Processing
"Ionized metal physical vapor deposition (IMPVD) at pressures of a few mTorr is being increasingly used to deposit diffusion barriers and Cu seed layers into high aspect ratio trenches. Understanding plasma-substrate interactions will be critical to designing the next generation processes as the …
-
Thermocapillary convection in laser melted pools during materials processing
… (compared to conduction models) for low Prandtl materials (Steel $\sim$0.1, Aluminium $\sim$0.01) due to the redistribution of heat by thermocapillary induced convection. Surface active agents (elements which modify the local values of surface tension) are shown to dramatically influence the …
-
Integrating hierarchically significant part numbers to bill of materials processing
The Bill of Materials is the front-end information required in the material planning function of an organization. Processing of the Bills of Materials in an organization is usually computerized. Products can be exploded and requirements for the production schedule can be planned in an efficient and …
-
In Situ Direct-Write Materials Processing Methods in Electron Microscopes
<p>Focused beam induced processing holds great promise for advanced nanoscale device design and prototyping but often has severe limitations in material quality, purity and compatibility. In particular focused electron beam induced deposition (FEBID) can create 3D nanostructures of extremely …
-
A Safeguards Design Strategy for Domestic Nuclear Materials Processing Facilities.
… the protection requirements for nuclear materials within the U.S. as well as abroad.Current Nuclear Safeguards regulations contain minimal prescriptive requirements relating to the design of new production facilities. Project management and engineering design guides require that design …
-
Control of materials processing variables in production resistance spot welding
… Department of Metallurgy, Mechanics, and Materials Science, 1991
-
Micro, meso and macro materials processing using high-speed liquid projectiles
… research is developmentof aknowledge base of materials processing by the impact of high-speed liquid projectiles. The work involved experimental study of generation and applications of high-speed liquid projectiles. The projectiles were generated by the launchers, which used gunpowder as an …
-
ADVANCED MATERIALS PROCESSING FOR DENSIFICATION AND PERMEABILITY OPTIMIZATION AT ELEVATED TEMPERATURES
… the potential and limitations of MSS for Si₃N₄ processing under moderate thermal conditions.
-
Costing methods for materials processing in the metals service center industry
Thesis (Ph. D.)--Michigan State University. Department of Accounting and Financial Administration, 1969
-
Nanoscale Materials Processing: Electron Beam-Induced Etching of Silicon and Silicon Dioxide
… on the EBIE process were examined for both materials. On silicon, it was observed that the increased current had little effect on the etch rate. In contrast, high current enhanced the etch rate of silicon dioxide. For both materials, increased beam energy resulted in a decrease in process …
-
Influences on nanocomposite structural performance: experimental study on materials processing and bonding
… amount of effort in adopting these nano-materials to structurally enhance<br/>an epoxy composite matrix. Though considered very promising many issues such as the<br/>dispersion and the bonding interface have been identified and there remains still no<br/>guaranteed structural …
-
Materials Processing Towards Development of Rapid Prototyping Technology for Manufacturing Biomedical Implants
Sintering of gel-cast calcium hydroxyapatite was studied by means of thermal analysis, XRD, mechanical testing, and SEM, both for sub-micron and the agglomerated powder type. Transformation temperatures of tri-calcium phosphate upon cooling were determined as 1475°C for (alpha' to alpha, …
-
Real-Time Closed-Loop Control of Microstructure and Geometry in Laser Materials Processing
Laser Materials Processing (LMP) is currently one of the fastest growing technologies of the 21st century. Different categories of this technology such as Laser Additive Manufacturing (LAM) and Laser Heat Treatment (LHT) have now paved the way for more versatile methods of manufacturing that were …
Page 1 of 14