Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 16 of 16 for “"Matrix Viscosity"”.

  1. Factors Affecting Fiber Orientation and Properties in Semi-Flexible Fiber Composites Including the Addition of Carbon Nanotubes

    … in an end-gated plaque were investigated. Matrix viscosity was found to have a small effect on fiber orientation. The impact matrix viscosity had on orientation was dependent on fiber loading. At lower fiber loadings, the higher viscosity material had a more asymmetric orientation profile …

    vt Repository record for Factors Affecting Fiber Orientation and Properties in Semi-Flexible Fiber Composites Including the Addition of Carbon Nanotubes (opens in a new tab)

  2. Natural Fibre Epoxy Composites Reinforced With Graphene: Investigation Into The Effects of Resin Viscosity, Graphene Percentage and Fibre Treatment

    … the weak interfacial adhesion between fibre and matrix deteriorates the load transfer capability of composites leading to diminished mechanical and thermal performance. To deal with this problem, incorporation of nanoparticles with high aspect ratio like graphene nanoplatelets (GNPs) has been …

    auckland-ms Repository record for Natural Fibre Epoxy Composites Reinforced With Graphene: Investigation Into The Effects of Resin Viscosity, Graphene Percentage and Fibre Treatment (opens in a new tab)

  3. SOLVENT-FREE EXTRUSION EMULSIFICATION INSIDE TWIN SCREW EXTRUDER

    … new top-down technique specially suited to high viscosity polymers (100-1000 Pa.s) for producing sub-micron (100-500 nm) particles inside a twin screw extruder (TSE) without the use of hazardous solvents. SFEE has been difficult to implement in industry due to process sensitivities and a lack of …

    mcmaster Repository record for SOLVENT-FREE EXTRUSION EMULSIFICATION INSIDE TWIN SCREW EXTRUDER (opens in a new tab)

  4. The impact of brittle clast failure within a viscous matrix on deformation dynamics: A 3D experimental approach

    … of brittle clasts encompassed by a viscous matrix that flows. Here, we investigate controls on semi-brittle deformation to better understand the changes in slip dynamics from a viscous end member to a brittle end member, including semi-brittle deformation. To this end, we deform analog …

    iastate Repository record for The impact of brittle clast failure within a viscous matrix on deformation dynamics: A 3D experimental approach (opens in a new tab)

  5. Fusion bonding of reinforced thermoplastic

    … curve of the reinforced thermoplastic matrix, PEEK, was measured using the thick adherend specimen This curve is presented along with an analysis of the thick adherend specimen failure surface using scanning electron microscopy The influence of matrix viscosity on control of bondline …

    glasgow Download PDF for Fusion bonding of reinforced thermoplastic (opens in a new tab)

  6. Characterization and Optimization of Sand and Tung Oil-Based Resins for Binder-Jet 3D Printing

    … bonding quality of the composites. The resin’s viscosity was optimized through controlled thermal treatment in a convectional oven, and its stability was monitored over 15 days under both room temperature and freezer conditions using a hybrid rheometer. The results show that tung oil-based resin …

    gsu Repository record for Characterization and Optimization of Sand and Tung Oil-Based Resins for Binder-Jet 3D Printing (opens in a new tab)

  7. Injection Molding of Pregenerated Microcomposites

    … of poly(ethylene terephthalate) (PET) as the matrix and HX1000 as the thermotropic liquid crystalline polymer (TLCP). Several factors were examined to maximize the mechanical properties of these composites, including injection molding temperature, matrix viscosity, and nozzle tip exit …

    vt Repository record for Injection Molding of Pregenerated Microcomposites (opens in a new tab)

  8. Manufacture and Characterization of Micro-/Nano-fibrillated Composites and their Applications

    … indicate that tuning the reinforcement to matrix viscosity ratio significantly impacts the fibrils’ morphology. By choosing a low viscosity ratio system, the fibrils’ diameters are refined, and continuity is enhanced, resulting in composites with improved mechanical properties. Moreover, a …

    toronto-retro Repository record for Manufacture and Characterization of Micro-/Nano-fibrillated Composites and their Applications (opens in a new tab)

  9. Multi-scale effects on deformation mechanisms of polymer nanocomposites : experimental characterisation and numerical study

    … effect between nanofillers and the polymer matrix. More importantly, polypropylene (PP)/clay nanocomposites have quite a high potential to form such innovative materials and replace the conventional plastics in many automotive and packaging applications. Nevertheless, the growth of PP/clay …

    auckland-ms Repository record for Multi-scale effects on deformation mechanisms of polymer nanocomposites : experimental characterisation and numerical study (opens in a new tab)

  10. Reimagining Subcutaneous Biopharmaceutics for Oligonucleotides

    … robustness. Modification of the extracellular matrix composition influenced release kinetics. An increase in hyaluronic acid concentration increased extracellular matrix viscosity, significantly slowing oligonucleotide release, and addition of collagen further limited molecular mobility by …

    kings Repository record for Reimagining Subcutaneous Biopharmaceutics for Oligonucleotides (opens in a new tab) Embargoed until 2031-08-01

  11. Processing Behavior of Thermoplastics Reinforced with Melt Processable Glasses

    … to form composite systems where both the matrix and reinforcing phase were deformable during processing. For the process of injection molding, several factors were examined to maximize the mechanical properties obtained with the addition of the phosphate glasses. The influence of variables …

    vt Repository record for Processing Behavior of Thermoplastics Reinforced with Melt Processable Glasses (opens in a new tab)

  12. VASCULARIZATION OF BIOENGINEERED FAT WITH TUNABLE MATRIX PROPERTIES FOR MACRO-PERFUSION AND SOFT TISSUE RECONSTRUCTION

    … Additionally, a more robust understanding of matrix mechanics, such as stiffness and viscosity, is crucial to recapitulating the material properties that support fat and vascular formation. Thus, there is a need to establish a tunable system capable of bioengineering fat and other clinically …

    cornell Repository record for VASCULARIZATION OF BIOENGINEERED FAT WITH TUNABLE MATRIX PROPERTIES FOR MACRO-PERFUSION AND SOFT TISSUE RECONSTRUCTION (opens in a new tab)

  13. Analysis Of Multiwalled Carbon Nanotube Agglomerate Dispersion In Polymer Melts

    … state of MWNT dispersion was obtained in high viscosity matrices because applied shear stresses were high. On the contrary, if high shear rates were applied, similar states of MWNT dispersion were obtained in low and high viscosity matrices although significantly lower shear stresses were …

    qucosa-diss

  14. Phase morphology and fracture toughness of CNT/polytherimide modified epoxy polymer nanocomposites as matrices for advanced CFPR composites

    … FRP composites, as the toughness of the matrix is closely related to the delamination fracture toughness of the FRP composites, making them particularly susceptible to impact damage. <br/><br/>In light of these issues, the motivation of this work was focused on enhancing the crack …

    qu-belfast Repository record for Phase morphology and fracture toughness of CNT/polytherimide modified epoxy polymer nanocomposites as matrices for advanced CFPR composites (opens in a new tab) Download PDF for Phase morphology and fracture toughness of CNT/polytherimide modified epoxy polymer nanocomposites as matrices for advanced CFPR composites (opens in a new tab)

  15. Multifunctional polymer composites for thermal energy storage and thermal management

    … polymer composites that combine a polymer matrix, a PCM and a reinforcing agent, to reach a good balance of mechanical and TES properties. Since this research topic lacks a systematic investigation in the scientific literature, a wide range of polymer/PCM/reinforcement combinations were …

    trento Repository record for Multifunctional polymer composites for thermal energy storage and thermal management (opens in a new tab)

  16. Role of dry beans (Phaseolus vulgaris L.) in binding bile salts and modulating lipid digestion: Impact of the bean matrix and high-hydrostatic pressure processing

    … related to the physico-chemical properties (e.g. viscosity) of DF, and involve binding to bile salts (BS) in the small intestinal to prevent BS re-absorption which further promote cholesterol catabolism and delay lipid digestion. Nevertheless, the precise mechanisms are not fully understood yet. …

    vt Repository record for Role of dry beans (Phaseolus vulgaris L.) in binding bile salts and modulating lipid digestion: Impact of the bean matrix and high-hydrostatic pressure processing (opens in a new tab)