Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 112 for “"Maximum output power"”.
-
Power Scaling Architectures for Solid-State and Fiber Lasers
This thesis focuses on developing power scaling architectures for solid-state and fiber lasers. The thermally-guided fiber-rod (TGFR) laser is suggested as a novel power scalable concept. This device lies in a domain between bulk rod lasers and traditional fiber lasers. The motivation is to benefit …
-
Fabrication of novel semiconductor lasers grown by metalorganic chemical vapor deposition
… on nonplanar substrates which increase the maximum output power of semiconductor lasers when limited by catastrophic optical degradation (COD). Additionally, the characteristics and properties of high energy implantations are discussed as they relate to the fabrication of optoelectronic …
-
Modeling and analysis of source-commutated five-phase diode rectifier systems
… creating a machine-rectifier system that has maximum output power and minimal acoustic noise."--Abstract, page iii.
-
Comparison of pump cavitation mitigation techniques in micro scale organic Rankine cycle systems
… effect on the operation of the system. The maximum output power of 300W occurred at 1000 rpm with an optimum expander output trend present in most cases. At the highest tested 1200 rpm case the maximum boundaries of the system where insufficient to result in stable system operation, …
-
Co-Design and Integration of Wideband Push-Pull Power Amplifier and Omnidirectional Antenna
A novel technique to co-design a push-pull power amplifier and a wideband omnidirectional antenna has been investigated. The goal was to cover the frequency range from 750 MHz to 3 GHz. A biconical antenna has been simulated in Ansys HFSS and the resulting parameters were exported to AWR Microwave …
-
Methods of frequency tuning vibration based micro-generator
… energy. In order to maximize available power, micro-generators are typically inertial devices that operate at a single resonant frequency. The maximum output power is generated when the resonant frequency of the generator matches the ambient vibration frequency. The output power drops …
-
Thermal lensing in a high power diode-pumped continuous wave Yb⁺³:KY(WO₄)₂ laser
High power diode-pumped solid state (DPSS) lasers are a rapidly growing technology that is attractive for various applications in scientific and industrial fields. DPSS lasers are highly efficient, reliable and durable with superior beam quality when compared to flash-lamp pumped lasers. …
-
Development and application of an advanced switched reluctance generator drive
… of a Switched Reluctance Generator (SRG) for maximum output power. The SRG is an attractive solution to the increasing worldwide demand of electrical energy. It is low cost with a rugged structure, operates with high efficiency over a wide speed range, and is fault tolerant. In many …
-
Vertical -Cavity Surface -Emitting Lasers Operating in Photonic Crystal Waveguide Defect Modes
… The oxide aperture size is optimized to give maximum output power and lower threshold current, the role of loss in improving modal properties is investigated, and high speed operation is characterized. Optimized lasers exhibit sub-milliamp threshold current and operate in the fundamental …
-
Current-Source DC-DC Converter for Fiber-Optic Communication Systems
… concept for a current-source DC-DC converter for powering sensors used in an underwater communications system is presented. The proposed converter steps down an input current of 0.9 A to 0.625 A, while maintaining an output voltage of 24 V and output power of 15 W. The complete steady-state …
-
Evaluation of Implementing Thermoelectric Materials as a Power Generator
… variables or thermoelectric properties, and the maximum output power of Tubular Thermoelectric Generators (TTEGs).
-
A 9dB Back-off GaN Doherty Amplifier
… the design and implementation of a Doherty power amplifier operated in the Sub-7 GHz band for the purpose of improving backed off power added efficiency when compared to a single-transistor power amplifier design. The Doherty power amplifier utilizes a Wilkinson divider for an uneven input …
-
Silicon-based terahertz signal generation with multi-phase sub-harmonic injection locking technique
… 9HP SiGe BiCMOS process. The design achieves a maximum output power of -16.6dBm at 498GHz, a phase noise of -87dBc/ Hz at 1MHz offset, and a total 5.1% frequency tuning range from 485.1GHz to 510.7GHz, which is the largest frequency tuning range among all the reported silicon-based THz …
-
Pulsed laser deposition of doped sesquioxide films for planar waveguide lasers
… of the sesquioxides, should allow for power scaling of these waveguide lasers with minimal thermal affects. The laser results in this thesis are for progressively higher powers, and no detrimental heating affects are witnessed.<br/><br/>This thesis reports on the growth of single and …
-
Analysis of the potential of gallium nitride based monolithic power amplifiers in the microwave domain with more than an octave bandwidth
… nitride (GaN) based monolithic broadband high power amplifiers with more than an octave bandwidth in the microwave domain up to 40 GHz with unprecedented power levels. The most fundamental theoretical limitation for reactively matched amplifiers is imposed by the Bode-Fano limit. This …
-
Erbium-doped tellurite glass microsphere amplifiers and lasers
… laser, including threshold, lasing wavelength, output power optimization, and temperature dependence. Theoretical calculations for these properties were also presented. State-of-the-art L-band microsphere laser with maximum output power of 124.5 μW was demonstrated which has potential in various …
-
Phase advance modulation of low-cost power electronic converters for SPM wind turbine generators.
… research investigates the control of low-cost power electronic converters for small-scale wind turbines under standalone applications. The system utilizes a surface permanent magnet (SPM) generator operating with a semi-bridge switched-mode rectifier (SMR) into a DC voltage load. Conventional …
-
Highly efficient Yb-ion-doped lasers pumped at 946 nm by a compact Nd:YAG laser
… nonlinear microscopy, telecommunications etc. A powerful and high beam quality (near diffraction limited: M2~1) pump laser is desirable to mitigate the effect of reabsorption loss that Yb-doped crystals exhibit and realize highly efficient operation in both continuous-wave (CW) and pulsed …
-
Design and Analysis of a Phase Shifted Full Bridge Converter for High Efficiency Operation
… constructed, capable of delivering 1.2 kW for an output voltage of 56 V, with a maximum output voltage ripple of 1%. The input voltage range is set to 350-400 V. The final design was then compared with an alternative solution, an LLC converter, in order to compare possible advantages with each …
-
A High Temperature Wideband Power Amplifier for a Downhole Communication System
… these extreme temperatures. The proposed power amplifier (PA) has been designed for a downhole communication system operating at an ambient temperature of 230oC. GaN technology was chosen primarily due to its ability to function at a high junction temperature. The proposed PA was designed …
Page 1 of 6