Global ETD Search
Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.
Results
Showing 1 to 20 of 87 for “"Maxwell Model"”.
-
Παρασκευή και εφαρμογές σύνθετων μεμβρανών για τον διαχωρισμό αερίων σε βιομηχανικές εγκαταστάσεις
… were compared with the predicted values from the Maxwell model and the modified Maxwell model. It was concluded that the experimental values are generally higher than those predicted by the Maxwell model. The proposed Maxwell model shows very good agreement between the predicted and the …
-
Chemo-Thermo Cure of Viscoelastic Materials for Semiconductor Packaging Applications
… energy. There is a need to develop a generic modeling formulation that is applicable to any material of interest in order to enable the study of different bonding materials and develop optimized curing cycles. This study reports a numerical formulation to evaluate the stress generated and …
-
Development and Validation of a Constitutive Model for Dental Composites during the Curing Process
… data were used to develop a constitutive model for the Young’s modulus as a function of time of the dental composite during cure. A Maxwell model, spring and dashpot in series, was used to simulate the composite. The compliance of the shrinkage stress device was also taken into account by …
-
Modeling Droplet Impingement Dynamics on Micropillar-Arrayed Viscoelastic Substrates Through Microgeometry-Free and Multiscale Methods
… has been thoroughly investigated by two distinct modeling methods, i.e., microgeometry-free and multiscale modeling methods. The viscoelasticity of the micropillar-arrayed substrate is characterized by a five-parameter generalized Maxwell model via the Laplace-Carson transform. In the …
-
Modeling of Brain Tissue as Porous Visco-hyperelastic Medium
This thesis deals with the modeling and simulation of the large deformation of human brain tissue. The brain tissue is modeled as a porous viscoelastic medium. It consists of slightly compressible nonlinear visco-hyperelastic solid skeleton and the cerebrospinal fluid with which the solid skeleton …
-
Investigation of low frequency dynamic viscoelastic properties of aqueous polyethylene oxide solutions
… range which cannot be described by a simple Maxwell model. This behavior suggests that a distribution of relaxation frequencies will be required to give an adequate description of the viscoelastic properties in these solutions.
-
Seismic design and evaluation of moment resisting frames using elastomeric dampers
… their behaviour.</p> <p>Based on the Generalised Maxwell Model, a new hysteretic model was developed and proposed in this thesis which is able to capture the behaviour of the material. As part of this model an equation was derived which describes the force-displacement relationship of the …
-
Effects of Viscoelasticity and Hyperelasticity on Attenuation Characteristics of Periodic Foundations
… using lumped parameters system—Kelvin-Voigt model and Maxwell model---and layered continuum media. Our goal is to show that band structure of a metamaterial with viscoelastic base materials is far richer than a metamaterial with elastic base materials. Furthermore, we will perform Frequency …
-
Rheological properties of low molecular weight polypropylenes
… analytical expressions provided by the convected Maxwell model, with deformation rate dependent relaxation times as proposed by Bogue and White. The zero shear viscosity data were used for theoretical predictions for gravity spinning assxaming Newtonian behavior. Such predictions depicted many …
-
An abstract model for flow of a two-phase viscoelastic fluid in a tube
A phenomenological model has been developed to predict the time-dependent flow behavior of a suspension of solid particles in viscoelastic fluid. The model consists of a Maxwell model in parallel with a plastic model, which has a yield stress parameter Y. The effect of the solid particles is …
-
Viscous Dampers for Optimal Reduction in Seismic Response
To model dissipation of energy in vibrating civil structures, existence of viscous damping is commonly assumed primarily for mathematical convenience. In such a classical damper, the damping force is assumed to depend only on the velocity of deformation. Fluid viscous dampers that provide this type …
-
The rheology of fiber formation
… described reasonably well by the Bogue and White model or a generalized convected Maxwell model.</p><p>A mathematical theory integrating all instability mechanisms: capillarity, ductility, and fracture has been developed and successfully applied to the filament spinnability problem. The …
-
Fluorinated Polystyrene-b-polybutadiene-b-polystyrene (SBS) for Membrane Gas Separation
… volume, and glass transition temperature. The Maxwell model and additive model were used to obtaining the gas permeability and solubility in the fluorinated PB (FPB) phase, respectively. Increasing the F content from 0 to 27 wt% in the FPB phase increases the CO2 solubility from 0.58 to 1.1 cm3 …
-
Steady rolling contact and resistance of a cylinder on a viscoelastic foundation by an integral equation algorithm
… pressure. The so-called generalized N-parameter Maxwell model is used to characterize the rheology and is quite general and capable of representing realistic polymeric, elastomeric and rubber compounds. An iterative algorithm, like the Newton Raphson method, is used to obtain consistent …
-
Some dynamic mechanical properties of apple fruits and their use in the solution of an impacting contact problem of spherical fruit
… to be frequency dependent. Due to scatter, Maxwell model approximations were the best mechanical model representations that could be developed directly. These, however, appeared to be sufficiently good approximations for the data. A statistical curve fitting procedure resulted in expressions …
-
Dynamic Modeling and Control System Design for Shape Memory Alloy Actuators
… a major difficulty in control system design. Un-modeled or poorly modeled hysteresis introduces inaccuracy in tracking and the performance of the system. Experimental test bench is constructed for one set of SMA actuators that resembles the membrane structure's supporting system. Hysteresis is …
-
Stress relaxation of glass using a parallel plate viscometer
… a finite term Prony series of a Generalized Maxwell model. The additional goals of this study are to compare the results with those obtained by a previous student using a tensile creep apparatus, and to compare the experimental results with a numerical simulation using the finite element …
-
Free-Energy Based Modeling of Planar Dielectric Elastomer Actuators
… light weight, and low cost. However, the task of modeling of DEAs is typically challenged in the presence of the nonlinear features, time-independent viscoelastic behaviors, complex electromechanical coupling, etc. To address such a challenge, a free-energy based model for DEAs moving in vertical …
-
Transport properties of polystyrene above and below the glass transition temperature
… empirical estimates. Therefore, a mathematical model was developed to predict the density of EPS during a prepuffing expansion process. Use of the mathematical model requires some knowledge of the fundamental properties of viscosity, shear modulus, and mass diffusion coefficients for water and …
-
EXPERIMENTAL CHARACTERIZATION OF STRESS RELAXATION IN GLASS
… a finite term Prony series of a Generalized Maxwell model. This study focuses on viscoelastic characterization of stabilized glass samples at lower stress levels between 3 and 12 MPa where it demonstrates linearity. Analysis and post-processing of creep data, performed in MATLAB and MAPLE, …
Page 1 of 5