Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 71 for “"Mechanical Simulation"”.

  1. Quantum mechanical simulation of magnetic resonance imaging

    … dynamics of the corresponding coherences, etc. Simulation of such experiments requires accurate quantum mechanical treatment of spin processes together with an accurate treatment of classical processes, such as diffusion and convection.<br/><br/>In this thesis I report the theoretical and …

    soton Download PDF for Quantum mechanical simulation of magnetic resonance imaging (opens in a new tab)

  2. Quantum mechanical simulation of a metal-oxide-semiconductor system

    Quantum mechanical (QM) effects have become an essential part of modern device physics when metal-oxide-semiconductor (MOS) devices are down-scaled to the deep submicrometer regime. In this project, a QM simulator, based on the self-consistent solution of Schr??dinger and Poisson equations, has …

    nus Repository record for Quantum mechanical simulation of a metal-oxide-semiconductor system (opens in a new tab) Download file for Quantum mechanical simulation of a metal-oxide-semiconductor system (opens in a new tab)

  3. Thermo-mechanical simulation of Si processing for photovoltaic applications

    … were 3 different cooling rates. The wire sawing simulation was done in the top, middle and bottom section of these ingots. The warpage was, therefore, studied in 9 wafers. These models also simulated the spacial/temporal variation of in-elastic deformation and dislocation density in the ingot and …

    ubc Repository record for Thermo-mechanical simulation of Si processing for photovoltaic applications (opens in a new tab) Download PDF for Thermo-mechanical simulation of Si processing for photovoltaic applications (opens in a new tab)

  4. Mechanical Simulation of Articular Cartilage Based on Experimental Results

    … in order to predict articular cartilage (AC) biomechanical properties before and after growth. Previous research has noted limitations in the CGFEM such as model convergence with growth periods greater than 12 days. The main aims of this work were to address these limitations through (1) …

    calpoly Repository record for Mechanical Simulation of Articular Cartilage Based on Experimental Results (opens in a new tab)

  5. Coupled Thermo-Hydro-Mechanical Simulation of Geological Porous Media

    … of capturing the difficult thermo-hydro-mechanical (THM) coupling that occurs in porous rocks as a result of thermal loads. Results show that the respective mechanisms have been captured differently well. The thermal field is highly similar to that in the reference experiment while the …

    chalmers Repository record for Coupled Thermo-Hydro-Mechanical Simulation of Geological Porous Media (opens in a new tab)

  6. Mechanical Simulation of the Passive Confinement of Reinforced Concrete for Design

    Reinforcement that acts to passively confine concrete, such as stirrups, steel tubes, FRP (fibre reinforced polymer) wraps or a combination of the above can enhance the strength and, more importantly, the ductility of concrete members, allowing for greater absorption of energy and consequently …

    adelaide Repository record for Mechanical Simulation of the Passive Confinement of Reinforced Concrete for Design (opens in a new tab)

  7. Mechanical Simulation of Human Pleura for Medical Training by Crosslinked Polyurethane

    Due to the absence of abundant mechanical data on human tissues, currently used medical training materials and devices are not well simulated by synthetics, which hampers the ability of trainees such as soldiers to best master first-aid methods. The present study is to use crosslinked polyurethanes …

    washington Repository record for Mechanical Simulation of Human Pleura for Medical Training by Crosslinked Polyurethane (opens in a new tab)

  8. Thermo-mechanical Simulation and Experimental Characterization of Power Semiconductor Devices' Packaging Processes

    I moduli di potenza basati su dispositivi a semiconduttore rivestono un ruolo centrale in varie applicazioni, dai controlli industriali alla domotica. In particolare, i moduli di potenza risultano cruciali nello sviluppo dei veicoli elettrici e ibridi in quanto il trasferimento di energia tra la …

    catania Repository record for Thermo-mechanical Simulation and Experimental Characterization of Power Semiconductor Devices' Packaging Processes (opens in a new tab)

  9. Thermo-hydro-mechanical simulation of a generic geological disposal facility for radioactive waste

    … significant heat that will cause thermo-hydro-mechanical coupled processes in the rock mass. The thermal expansion of the fluid will be greater than the grains causing a decrease in mean effective stress with the low permeability restricting Darcy flow and excess pore pressure equilibration. A …

    whiterose Download PDF for Thermo-hydro-mechanical simulation of a generic geological disposal facility for radioactive waste (opens in a new tab)

  10. Integrated Fracture and Thermo-Hydro-Mechanical Simulation to Investigate Near-Wellbore Stress Changes in Geologic Storage

    This thesis employs a Thermo-Hydro-Mechanical (THM) reservoir simulator coupled with fracture simulation to examine the near-wellbore stress changes due to CO₂ and H₂ injection. This thesis aims to understand the optimal injection control, including injection temperature and rate, to prevent …

    tamu Repository record for Integrated Fracture and Thermo-Hydro-Mechanical Simulation to Investigate Near-Wellbore Stress Changes in Geologic Storage (opens in a new tab)

  11. Thermo-Piezo-Electro-Mechanical Simulation of AlGaN (Aluminum Gallium Nitride) / GaN (Gallium Nitride) High Electron Mobility Transistor

    … in this paper was to better understand the mechanical stresses and strains that are present in a hybrid AlGaN (Aluminum Gallium Nitride) / GaN (Gallium Nitride) HEMT, while under electrically-active conditions. One of the main issues currently being researched in these devices is their …

    utahstate Repository record for Thermo-Piezo-Electro-Mechanical Simulation of AlGaN (Aluminum Gallium Nitride) / GaN (Gallium Nitride) High Electron Mobility Transistor (opens in a new tab)

  12. Thermal and thermal-mechanical simulation for the prediction of fatigue processes in packages for power semiconductor devices

    … and how the lifetime can be estimated. Numerical simulation is an important tool for the development of power electronic systems. This thesis analyse the thermal and thermal-mechanical behaviour of packages for power semiconductor devices with the help of simulations. One topic is the evaluation …

    qucosa-diss

  13. A study of directionally solidified Rene 80 subjected to short-term overtemperature

    … on Rene 80 DS were studied using Gleeble thermo-mechanical simulation apparatus. Volume fraction of gamma prime to gamma matrix was quantified and used to assess the effects of time, temperature and stress. Volume fraction was found to decrease with increasing temperature and time. Dissolution …

    manitoba Repository record for A study of directionally solidified Rene 80 subjected to short-term overtemperature (opens in a new tab)

  14. In situ calibration for load cells in bipedal 3D printed robot utilizing Computer-Aided Design model

    … carefully. This research project utilizes mechanical simulation to calculate the known force values acting on the load cells without taking them out of the robot system. Then these force values are used for the calibration process. In this thesis, the in situ calibration method will be …

    vt Repository record for In situ calibration for load cells in bipedal 3D printed robot utilizing Computer-Aided Design model (opens in a new tab)

  15. Characterisation and Development of an Experimental Mechanical Model of Avascular Necrosis of the Femoral Head

    … however none of these models produce the mechanical failures that are observed in AVN femoral heads. The aim of this study was to produce a mechanical simulation model of AVN in vitro. To achieve this, a series of preliminary studies were carried out. First, femoral heads from AVN patients …

    whiterose Download PDF for Characterisation and Development of an Experimental Mechanical Model of Avascular Necrosis of the Femoral Head (opens in a new tab)

  16. Improving the accuracy and reliability of M06-2X using atom-centered potentials

    Current quantum mechanical (QM) simulation methods often struggle to balance accuracy with computational efficiency: They either deliver highly accurate results at significant computational cost and therefore are only applicable to small chemical systems, or they trade off accuracy for faster …

    ubc Repository record for Improving the accuracy and reliability of M06-2X using atom-centered potentials (opens in a new tab) Download PDF for Improving the accuracy and reliability of M06-2X using atom-centered potentials (opens in a new tab)

  17. Novel Vector Assignment Approach for Inherent Strain Modeling of Laser Powder Bed Fusion Manufacturing

    … to AM part development is cost prohibitive, simulation of prints has become crucial. However, full thermo-mechanical simulation is susceptible to the same pitfall of time and computational cost in order to attain part-scale results. The development of lightweight AM print simulations that …

    clemson Repository record for Novel Vector Assignment Approach for Inherent Strain Modeling of Laser Powder Bed Fusion Manufacturing (opens in a new tab)

Page 1 of 4