Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 20 for “"Mechanically Fastened"”.

  1. A study of pull-through failures of mechanically fastened joints.

    The relationship between the bending moment and the through-plane shear force in the vicinity of a mechanical fastener at failure was determined. Experiments were conducted on 4-inch wide flat plate aluminum and graphite-epoxy composite specimens that modeled portions of a wing skin along a spar …

    nps Repository record for A study of pull-through failures of mechanically fastened joints. (opens in a new tab)

  2. Internal Redundancy of Mechanically-Fastened Steel Built-Up Axially-Loaded Members

    … objectives of this research were to determine if mechanically-fastened steel built-up axially-loaded tension members are resistant to complete cross-sectional fracture when a single component suddenly fractures and if so, to develop simplified methods of analysis for post-fracture load …

    purdue-thes Repository record for Internal Redundancy of Mechanically-Fastened Steel Built-Up Axially-Loaded Members (opens in a new tab)

  3. The effects of water displacing corrosion preventatives on the fatigue behaviour of mechanically fastened aluminium joints

    Two failure mechanisms in a double lap joint are investigated. Analytical models of net-section and gross-section failure modes are proposed to describe these mechanisms. The effects of lamping force, interference fit, maximum axial load and WDCP on fatigue performance of the joint are included in …

    unsw Repository record for The effects of water displacing corrosion preventatives on the fatigue behaviour of mechanically fastened aluminium joints (opens in a new tab)

  4. A novel finite element for modeling a fastener in a lap joint assembly

    … modeling for the specific application of mechanically fastened lap joints. The research here bridges the gap between two traditional methods commonly used in industry today. The novel element is more accurate than the first traditional method, by using a single-beam element to join plate …

    wichita-thes Repository record for A novel finite element for modeling a fastener in a lap joint assembly (opens in a new tab)

  5. Continuation of Field and Laboratory Tests of a Proposed Bridge Deck Panel Fabricated from Pultruded Fiber-Reinforced Polymer Components

    … fiber-reinforced polymer elements, bonded and mechanically fastened together. The testing involved laboratory stiffness tests performed on one deck panel which afterwards, was placed in a field test site at the I-81 Troutville Weigh Station facility. The daily truck traffic over the deck panel …

    vt Repository record for Continuation of Field and Laboratory Tests of a Proposed Bridge Deck Panel Fabricated from Pultruded Fiber-Reinforced Polymer Components (opens in a new tab)

  6. An Experimental Investigation of Bolt Preload Relaxation in Pultruded GFRP Composite Joints

    Mechanically fastened joints in pultruded composites are necessary for reasons of maintenance, repair, and assembly. Pultruded composites utilize polymers as matrices and therefore are susceptible to time-dependent effects. The positive effects of increasing the clamping force in bolted joints are …

    odu Repository record for An Experimental Investigation of Bolt Preload Relaxation in Pultruded GFRP Composite Joints (opens in a new tab)

  7. Optimum design of bolted composite lap joints under mechanical and thermal loading

    … is developed for the analysis and design of mechanically fastened composite lap joints under mechanical and thermal loading. Based on the combined complex potential and variational formulation, the solution method satisfies the equilibrium equations exactly while the boundary conditions are …

    arizona-thes Repository record for Optimum design of bolted composite lap joints under mechanical and thermal loading (opens in a new tab)

  8. Effect of Galvanic Corrosion on Crack Propagation of Cold Expanded Holes in AA2024-T3

    … improve a structure’s fatigue life, processes on mechanically fastened joints have been a topic of focus as it is naturally a discontinuity in the material leading to a local stress concentration under loading. Cold expansion is a well-known technique with a wide range of applications in both new …

    embry-riddle Repository record for Effect of Galvanic Corrosion on Crack Propagation of Cold Expanded Holes in AA2024-T3 (opens in a new tab)

  9. An Analytical and Experimental Study of Clearance and Bearing-Bypass Load Effects in Composite Bolted Joints

    … of clearance and bearing-bypass loading for mechanically fastened joints in composites. A simple method of analysis is developed to account for the nonlinear effects of bolt-hole clearance. The nonlinear load-contact variations for clearance-fit fasteners are also measured using specially …

    odu Repository record for An Analytical and Experimental Study of Clearance and Bearing-Bypass Load Effects in Composite Bolted Joints (opens in a new tab)

  10. Analysis of composite laminates with multiple fasteners by boundary collocation technique

    … determining the non-linear contact stresses in mechanically fastened composite laminates while capturing the effects of finite geometry, presence of edge cracks, interaction among fasteners, material anisotropy, fastener flexibility, fastener-hole clearance, friction between the pin and the …

    arizona-thes Repository record for Analysis of composite laminates with multiple fasteners by boundary collocation technique (opens in a new tab)

  11. Durable Sandwich Structure Joining Technology for NASA's Ares V Launch Vehicle

    … can provide increased mass-efficiency over mechanically-fastened joints. But, due to manufacturing sensitivities and certification requirements, conventional bonded joints can be improved upon by introducing structural redundancy. A longitudinal, durable redundant joint (DRJ) architecture …

    vt Repository record for Durable Sandwich Structure Joining Technology for NASA's Ares V Launch Vehicle (opens in a new tab)

  12. Structural Performance of Sandwich Concrete Walls including UHPC and GFRP Reinforcement under Bending and Axial Loads

    … moment capacity of their unspliced counterparts. Mechanically fastened specimens reached 86-92% of the moment depending on fastener spacing compared to unspliced specimens. The in-plane moment capacity for a section with a 7.6% GFRP reinforcement ratio was found to be the same as a conventional …

    queens Repository record for Structural Performance of Sandwich Concrete Walls including UHPC and GFRP Reinforcement under Bending and Axial Loads (opens in a new tab)

  13. Study of the Mechanical Performance of Similar and Dissimilar Titanium Alloy Joints Formed by Diffusion Bonding and Friction Stir Welding

    … reduced weight and fabrication costs compared to mechanically fastened structures. Both the processes are mainly optimized for titanium alloy, Ti-6Al-4V, to produce defect free sheets of it. The other titanium alloys such as Ti-6242 and Ti-54MFG offer advantages of high temperature sustainability …

    washington Repository record for Study of the Mechanical Performance of Similar and Dissimilar Titanium Alloy Joints Formed by Diffusion Bonding and Friction Stir Welding (opens in a new tab)

  14. Πειραματική και αριθμητική μελέτη συγκολλητών συνδέσμων μεταξύ διαφορετικών υλικών

    … and civilengineering. When compared to mechanically fastened joints, adhesive joints have theadvantages of having fewer sources of stress concentrations, more uniformdistribution of load, and better fatigue properties. Structures that are adhesivelybonded must be designed in such a way …

    greece Repository record for Πειραματική και αριθμητική μελέτη συγκολλητών συνδέσμων μεταξύ διαφορετικών υλικών (opens in a new tab)

  15. Experimental and Numerical Investigation of the Flexural Behaviour and Effective Flange Width of Mass Timber Composite Panels

    … Existing research has primarily focused on mechanically fastened or glue-pressed connections requiring large hydraulic presses, and limiting the practical manufacturability. Screw-gluing has been proposed as an alternative construction method; however, its structural viability and …

    waterloo Repository record for Experimental and Numerical Investigation of the Flexural Behaviour and Effective Flange Width of Mass Timber Composite Panels (opens in a new tab)

  16. Short- and Long-term Analysis of Timber Components and Joints Using Elasticity, Fracture Mechanics, and Viscoelasticity

    … timber and timber-based structural elements and mechanically fastened joints. The final section outlines future research to extending the proposed formulations and closed-form analytical models, as well as extending their range of applications. The principal contribution is the derivation of …

    unsw Repository record for Short- and Long-term Analysis of Timber Components and Joints Using Elasticity, Fracture Mechanics, and Viscoelasticity (opens in a new tab)

  17. Effects of Curing Cycle and Loading Rates on the Bearing Stress of Double Shear Composite Joints

    In the last few decades, there has been a shift to using more lightweight materials for the potential of fuel consumption reduction. In the Aerospace Industry, conventional metal structures are being replaced by advanced composite structures. The major advantage of an advanced composite structure …

    calpoly Repository record for Effects of Curing Cycle and Loading Rates on the Bearing Stress of Double Shear Composite Joints (opens in a new tab)

  18. Experimental and Design Evaluation of Multi-bolted GFRP Joints

    For infrastructure system implementation, high strength/stiffness to self-weight ratio, corrosion resistance and ease of fabrication are just a few of the many advantages of pultruded fiber reinforced polymer (PFRP) composites over traditional construction materials. However, challenges of …

    wvu Repository record for Experimental and Design Evaluation of Multi-bolted GFRP Joints (opens in a new tab)