Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 242 for “"Melt Pool"”.

  1. Modeling of melt pool thermal behavior in laser material

    … changes and the Marangoni effect. Since the melt pool dynamics is primarily driven by the interfacial forces, which in turn rely considerably on the melt pool geometry, a free surface tracking method associated with the numerical implementation scheme is proposed. The dissertation …

    must-thes Repository record for Modeling of melt pool thermal behavior in laser material (opens in a new tab)

  2. Low-Cost Melt Pool Monitoring in Wire Arc Additive Manufacturing

    … research explores the development of a low-cost melt pool monitoring solution using readily available and inexpensive hardware and opensource software to analyze the deposition process and identify observable weld characteristics from an optical camera feed. The system’s effectiveness was …

    ut-knoxville Repository record for Low-Cost Melt Pool Monitoring in Wire Arc Additive Manufacturing (opens in a new tab)

  3. Modeling the melt pool during powder bed fusion additive manufacturing

    … fusion additive manufacturing properties of the melt pool are of deep interest to ensure the structure of the nal product is as desired. Speci cally of concern in this work is estimating the melt pool with regards to width and depth considering also maximum temperature. Because analytic …

    wichita-thes Repository record for Modeling the melt pool during powder bed fusion additive manufacturing (opens in a new tab)

  4. Process optimization of metal 3D printing through thermographic analysis of the melt pool

    … the process parameters and their effect on the melt pool. Since the melt pool geometry and temperature distribution are related to the formation of process induced defects, residual stresses, and microstructure, their reliable in-situ characterization is essential for both process development …

    ets-quebec Download PDF for Process optimization of metal 3D printing through thermographic analysis of the melt pool (opens in a new tab)

  5. Self-organized nanostructures by heavy ion irradiation: defect kinetics and melt pool dynamics

    … defect kinetics as well as ion impact-induced melt pool formation. This thesis deals with self-organized pattern formation on Ge and Si surfaces under normal incidence irradiation with heavy monatomic and polyatomic ions of energies up to several tens of keV. Irradiation has been performed …

    qucosa-diss

  6. Toward Real-Time Predictions of Part Temperature Distribution and Melt Pool Anomaly for Additive Manufacturing

    … for real-time temperature prediction and melt pool geometry classification of moving heat source processes in advanced manufacturing, such as welding and metal additive manufacturing. For temperature prediction, this work presents a neural network (NN) and linear-time invariant (LTI) …

    tamu Repository record for Toward Real-Time Predictions of Part Temperature Distribution and Melt Pool Anomaly for Additive Manufacturing (opens in a new tab) Embargoed until 2028-05-01

  7. Toward Real-Time Predictions of Part Temperature Distribution and Melt Pool Anomaly for Additive Manufacturing

    … for real-time temperature prediction and melt pool geometry classification of moving heat source processes in advanced manufacturing, such as welding and metal additive manufacturing. For temperature prediction, this work presents a neural network (NN) and linear-time invariant (LTI) …

    tamu Repository record for Toward Real-Time Predictions of Part Temperature Distribution and Melt Pool Anomaly for Additive Manufacturing (opens in a new tab) Embargoed until 2028-05-01

  8. Toward Real-Time Predictions of Part Temperature Distribution and Melt Pool Anomaly for Additive Manufacturing

    … for real-time temperature prediction and melt pool geometry classification of moving heat source processes in advanced manufacturing, such as welding and metal additive manufacturing. For temperature prediction, this work presents a neural network (NN) and linear-time invariant (LTI) …

    tamu Repository record for Toward Real-Time Predictions of Part Temperature Distribution and Melt Pool Anomaly for Additive Manufacturing (opens in a new tab) Embargoed until 2028-05-01

  9. Creation of a digital twin for simulation of melt pool geometry in metal additive manufacturing

    … twin of the more complex model, which generates melt pool geometries comparable to the multi-physics model in a fraction of the time. This was accomplished by minimising a cost function based on the width and depth of a number of isotherms in a simulated melt pool in an electron beam melting AM …

    chalmers Repository record for Creation of a digital twin for simulation of melt pool geometry in metal additive manufacturing (opens in a new tab)

  10. DATA-DRIVEN MONITORING OF MELT POOL, SPATTER AND PLUME IN LASER POWDER-BED FUSION AM PROCESS

    … camera. The images of three objects, that are melt pool, plume and spatters, were collected and observed. A novel image processing method was proposed for extracting the features from the three objects. The statistical characteristics of the extracted features were studied under different built …

    nus Repository record for DATA-DRIVEN MONITORING OF MELT POOL, SPATTER AND PLUME IN LASER POWDER-BED FUSION AM PROCESS (opens in a new tab) Download file for DATA-DRIVEN MONITORING OF MELT POOL, SPATTER AND PLUME IN LASER POWDER-BED FUSION AM PROCESS (opens in a new tab)

  11. Microstructure Optimization and Melt Pool Control in Powder Bed Fusion towards the Development of Architected Lattice Materials

    … overlapping with the length scale of the PBF melt pool. PBF enables the manufacture of fine features, but the melt pool environment is shown to vary across the build volume of a MML cell which leads to microstructural anisotropy across it. Therefore, the solution proposed and described …

    jhu Repository record for Microstructure Optimization and Melt Pool Control in Powder Bed Fusion towards the Development of Architected Lattice Materials (opens in a new tab)

  12. A Machine Learning Method for the Prediction of Melt Pool Geometries Created by Laser Powder Bed Fusion

    A machine learning model is created to predict melt pool geometries of Ti-6Al-4V alloy created by the laser powder bed fusion process. Data is collected through an extensive literature survey, using results from both experiments and CFD modeling. The model focuses on five key input parameters that …

    uno Repository record for A Machine Learning Method for the Prediction of Melt Pool Geometries Created by Laser Powder Bed Fusion (opens in a new tab)

  13. Thermal Transport and Melt Pool Geometry in Metallic Powder Bed Additive Manufacturing Processes for Various Novel Engineering Materials

    Laser and electron beam powder bed melting additive technologies are being rapidly adapted by industry. These technologies rely on the ability to produce defect free parts through a delicate control of the process. However, this process has not been attempted or has failed for many common metallic …

    uconn-diss Repository record for Thermal Transport and Melt Pool Geometry in Metallic Powder Bed Additive Manufacturing Processes for Various Novel Engineering Materials (opens in a new tab)

  14. Melt Pool Feature Extraction, A State-Space Model and Spatial Layer-to-Layer Control for Powder Bed Fusion

    … tool to monitor a surface temperature field and melt pool morphology in PBF. With melt pool features from camera videos, manufacturing researchers use spatial feature maps to visualize defect locations and control researchers use layer-to-layer control to achieve more uniform melt pools and less …

    must-thes Repository record for Melt Pool Feature Extraction, A State-Space Model and Spatial Layer-to-Layer Control for Powder Bed Fusion (opens in a new tab)

  15. Numerical Analysis of the Melt Pool Kinetics in Selective Laser Melting Based Additive Manufacturing of M g2Si Thermoelectric Powders

    … sustainable development. Selective Laser Melting (SLM) based additive manufacturing process is a scalable and flexible method that has shown promising results in manufacturing high ZT Bi2T e3 material and is possible to be extended to other material classes such as M g2Si. The physical …

    vt Repository record for Numerical Analysis of the Melt Pool Kinetics in Selective Laser Melting Based Additive Manufacturing of M g2Si Thermoelectric Powders (opens in a new tab)

  16. Fundamental understanding of the transient melt pool dynamics, solidification kinetics and build texture in spot-melt additive manufacturing of Ti-6Al-4V

    … in play during the implementation of a spot melt strategy for metal additive manufacturing, which has become a popular alternative to the conventional raster melt strategy for site-specific microstructure control. In the first part of this dissertation, the effect of a spot melt strategy on …

    utk-theses Repository record for Fundamental understanding of the transient melt pool dynamics, solidification kinetics and build texture in spot-melt additive manufacturing of Ti-6Al-4V (opens in a new tab)

  17. Effect of Feedstock Chemistry and Melt Pool Dynamics on Realizing Superior Strength and Surface Quality in Additively Manufactured Ultra-High Strength Steels

    … high energy density laser to selectively melt powder particles into highly intricate designs. Laser powder bed fusion (L-PBF) of a newly developed high strength steel known as AF96 has received notable attention due to its unique microstructure and superior mechanical properties. The …

    tamu Repository record for Effect of Feedstock Chemistry and Melt Pool Dynamics on Realizing Superior Strength and Surface Quality in Additively Manufactured Ultra-High Strength Steels (opens in a new tab)

  18. Modeling of Temperature Dependent Surface Tension Forces Validation of a Temperature Dependent Surface Tension Framework with Application to Powder Bed Melt Pool Dynamics

    … dependent surface tension force driving the melt pool flow. High density ratio multiphase flows, as between the gas and the liquid metal in melt pool flow, are considered difficult to model due to the generation of spurious currents at the interface. At Fraunhofer Chalmers Center (FCC) a …

    chalmers Repository record for Modeling of Temperature Dependent Surface Tension Forces Validation of a Temperature Dependent Surface Tension Framework with Application to Powder Bed Melt Pool Dynamics (opens in a new tab)

Page 1 of 13