Global ETD Search

Search theses and dissertations gathered from participating repositories worldwide. Every result links back to the library that holds it. No account is needed.

Results

Showing 1 to 20 of 45 for “"Melt strength"”.

  1. Rheological Behavior of High Melt Strength Polypropylene-based Materials

    Two types of high melt strength polypropylenes (PP), including long-chain branching (LCB) PP and gel particle-filled PP, have been discussed. This dissertation aims to establish the structure-rheology-morphology-property relationship based on two sets of model PP systems. The linear viscoelasticity …

    tamu Repository record for Rheological Behavior of High Melt Strength Polypropylene-based Materials (opens in a new tab)

  2. Strategies to manufacture poly(lactic acid) blown films without melt strength enhancers

    … several drawbacks, among which its insufficient melt strength and low thermal stability, leading to narrow processing windows. Melt strength enhancers (MSEs) are often blended with PLA matrix to increase its melt strength, allowing the extrusion blowing and casting of the films. However, these …

    msu Repository record for Strategies to manufacture poly(lactic acid) blown films without melt strength enhancers (opens in a new tab)

  3. Effects of molecular structure on the rheology and processability of high density polyethylene blow molding resins

    … using capillary and extensional rheometers, a melt indexer and a blow molder unit to determine the rheological properties and processability of high density polyethylene blow molding resins. Twenty four commercial resins were analyzed in terms of their shear flow properties, extensional flow …

    ubc Repository record for Effects of molecular structure on the rheology and processability of high density polyethylene blow molding resins (opens in a new tab) Download PDF for Effects of molecular structure on the rheology and processability of high density polyethylene blow molding resins (opens in a new tab)

  4. Development of thermoplastic foams with heterogeneous cellular structures for acoustic applications

    … large cells were developed by foaming of a low melt strength polymer in presence of sodium bicarbonate and wollastonite. The same results were obtained by foaming a blend of a base polymer and a low melt strength polymer. Thermoplastic foams with graded porosity were fabricated by molding the …

    uoit Repository record for Development of thermoplastic foams with heterogeneous cellular structures for acoustic applications (opens in a new tab)

  5. Modification of Poly(lactic acid) by Melt Blending

    … by its brittleness in solid state and low melt strength in melt state. Various strategies have been developed to improve the performance of PLA, among which melt processing is the most viable and economical for industrial use. This thesis covers several independent aspects of PLA …

    umn Repository record for Modification of Poly(lactic acid) by Melt Blending (opens in a new tab)

  6. Design of biobased and biodegradable - compostable engineered plastics based on poly(lactide)

    … as corn and sugar cane. It possesses excellent strength and stiffness properties and is recognized as safe for biomedical and food packaging applications. Commercially, it costs ~$1/lb and is now competitive with petroleum based polymers that have dominated the industry for decades. However, the …

    msu Repository record for Design of biobased and biodegradable - compostable engineered plastics based on poly(lactide) (opens in a new tab)

  7. Design and engineering of value-added products from the polylactide (PLA) polymer

    … slow rate of crystallization and poor melt strength. In the current work, we have focused on addressing these critical issues with PLA via four specific approaches, with the ultimate goal of expanding its portfolio of commercial applications. First, the incorporation of a novel …

    msu Repository record for Design and engineering of value-added products from the polylactide (PLA) polymer (opens in a new tab)

  8. Rheology of Foaming Polymers and its Influence on Microcellular Processing

    The rheological properties of polymer melts and polymer/blowing agent (BA) solutions are determined experimentally and the influences of material rheological properties and crystallization on low-density foaming behaviour of polylactic acid (PLA) are investigated. Understanding the rheological …

    toronto-retro Repository record for Rheology of Foaming Polymers and its Influence on Microcellular Processing (opens in a new tab)

  9. Properties and foaming behaviour of thermoplastic olefin blends based on linear and branched polypropylene

    … polyolefin blends (TPOs) with controlled melt strength. These blends have potential applications in a variety of industries including foam processing and extrusion foaming. The main objective of the thesis is to provide a detailed investigation on the rheological, morphological, thermal, …

    queens Repository record for Properties and foaming behaviour of thermoplastic olefin blends based on linear and branched polypropylene (opens in a new tab)

  10. The Influence of Fat and Water on the Melted Cheese Characteristics of Mozzarella Cheese

    … Mozzarella cheese from 19% to less than 5% on melted cheese properties, i.e., apparent viscosity, cheese melt, and cook color, was investigated. Functional properties of melt and stretch and cook color were evaluated at d 1, 7, 14, and 28. A rapid microwave oven method underestimated the …

    utahstate Repository record for The Influence of Fat and Water on the Melted Cheese Characteristics of Mozzarella Cheese (opens in a new tab)

  11. Development of porous materials based on styrene-ethylene-butylene-styrene for oil spill remediation

    … SEBS material is challenging due to its poor melt strength and low melt flow index. In this thesis, the development of porous structures based on SEBS as mitigation approaches to address the oil spill challenge are investigated and presented. In the first part, the fabrication of a novel and …

    waterloo Repository record for Development of porous materials based on styrene-ethylene-butylene-styrene for oil spill remediation (opens in a new tab)

  12. Functional Polymer Foams from In-situ Fibrillated Polymer Blends

    … polymers is challenging due to their weak melt strength near processing temperatures. Blending of immiscible polymers has emerged as a convenient route to tune the viscoelastic and crystallization properties of polymers. Here we show that the in-situ generation of a fibrillar morphology …

    toronto-retro Repository record for Functional Polymer Foams from In-situ Fibrillated Polymer Blends (opens in a new tab)

  13. Chemical Modification of Polypropylene with Organo-functional Silanes

    … at higher service temperatures and its poor melt strength limits its application in some processes. PP also lacks functional groups necessary for good adhesion to synthetic or natural fillers. However, the thermal resistance of PP could potentially be improved by chemical crosslinking and its …

    waterloo Repository record for Chemical Modification of Polypropylene with Organo-functional Silanes (opens in a new tab)

  14. Effect of Silica Nanoparticles on Interfacial Tension and Crystallization of Poly(lactic acid) in Supercritical Carbon Dioxide

    … decrease the interfacial tension between polymer melt and surrounding fluid. They can also prevent coalescence through repulsion between two similar particles at the interface of two growing cells or increase in elasticity of the interface. Furthermore, nanoparticles can act as nucleating agents …

    waterloo Repository record for Effect of Silica Nanoparticles on Interfacial Tension and Crystallization of Poly(lactic acid) in Supercritical Carbon Dioxide (opens in a new tab)

  15. Advancing sustainability in additive manufacturing: material formulation and process development for recycled PET and PET/HDPE blend

    … rheological properties of r-PET, improving its melt strength, viscosity, and printability for filament-based 3D printing. Secondly, compatibilization strategies were implemented to improve the interfacial adhesion, phase dispersion, and mechanical properties of r-PET/r-HDPE blends, making them …

    uoit Repository record for Advancing sustainability in additive manufacturing: material formulation and process development for recycled PET and PET/HDPE blend (opens in a new tab)

  16. Poly(lactic acid)/cellulose nanocrystal composite blown films for food packaging applications

    … such as excellent stiffness, reasonable strength, excellent flavor and aroma barrier, as well as good grease and oil resistance. Despite these attributes, PLA's applicability as a flexible food packaging material is limited due to several drawbacks such as brittleness, poor water vapor …

    msu Repository record for Poly(lactic acid)/cellulose nanocrystal composite blown films for food packaging applications (opens in a new tab)

  17. Monolayer Polymeric Films for Food Packaging Applications

    … phenomenon produces a ductile material from the melt blending of two biopolymers with relatively brittle properties. This novel ductile blend could be utilised for food packaging applications. The present study employs a systematic design of experiments to investigate the potential for developing …

    auckland-ms Repository record for Monolayer Polymeric Films for Food Packaging Applications (opens in a new tab)

  18. EXPERIMENTAL AND NUMERICAL STUDIES OF BUBBLE DEVELOPMENT PROCESS IN ROTATIONAL FOAM MOLDING

    … in terms of shear viscosity, elastic modulus, melt strength and strain-hardening, intended for the production of foams with greater foam expansion, increased bubble density and reduced bubble size. Visualization experiments and theoretical predictions showed that higher viscosity could impede …

    mcmaster Repository record for EXPERIMENTAL AND NUMERICAL STUDIES OF BUBBLE DEVELOPMENT PROCESS IN ROTATIONAL FOAM MOLDING (opens in a new tab)

  19. Influence of Additives on the Foamability of Potato Starch based Biopolymers

    … foamability, which is largely dependent on melt strength, it is possible to modify hydrolyzed starch based biopolymers by bulk modification with bi- and multi- functional epoxy chain extenders. The modification work was carried out using a twin screw extruder (TSE) and an internal batch …

    mcmaster Repository record for Influence of Additives on the Foamability of Potato Starch based Biopolymers (opens in a new tab)

  20. The Effects of Crosslinking on Foaming of EVA

    … the crosslinking agent amount, the polymer melt strength/viscosity can be controlled, so as to obtain optimum foam morphology. The crosslinking also has effects on the diffusivity and solubility of a blowing agent inside EVA. The solubility and the diffusivity of the blowing agent in the EVA …

    toronto-retro Repository record for The Effects of Crosslinking on Foaming of EVA (opens in a new tab)

Page 1 of 3